Do you have a Class I Galvo Driven Laser Marking System and an operator who stands idle in front of the machine for anywhere from 30 seconds per part to potentially a few minutes for every batch of parts loaded into the Laser Marker? If you have high volumes of product to Laser Mark, this time spent idle can greatly increase the overall time needed to process the parts you need.
Consider the freshly redesigned Galvo Driven (Class I) Rotary Dial Index Laser Marking System for 2018 by TYKMA Electrox supplied by Millennium Signatures Marking Systems Inc.
This system is designed for additional efficiency over conventional Box Marking Enclosures with Manual or Automatic Door Systems.
These systems have a robust rotary table that is set-up to rotate 180 Degrees upon command at the end of each “marking cycle”. This allows an operator to be unloading parts that have just been marked and reload the fixture with fresh new parts at the very same time as the parts previously fixtured on the other half of the table are actively being marked. Once the cycle is complete and fresh (unmarked) product has been loaded there is a touch activation process that requires both hands to rotate the new parts in for processing at the same time as finished parts are presented back to the operator for unloading.
It’s a safe process, the Laser System is designed to provide Class I protection with a KG-3 Protective Viewing Window and integrates light curtains that will instantly stop the system in its tracks should the light curtain be interrupted or obstructed why the table is rotating.
It’s a much faster, more efficient process for applications that have high volumes of the same parts to be marked.
For more information on this system and various other system designs, contact our Technical Sales Team at Tel: (905) 639-0909 or by e-mail at email@example.com.
We are the Part Marking Specialists.
DOT PEEN MARKING SYSTEMS
VIBRO-ETCH MARKING PENS
CUSTOM MARKING INKS
CUSTOM PART MARKING SERVICES