THE MINILASE “E”

Millennium Signatures Marking Systems Inc. offers the Minilase E as a high quality but cost-effective, entry-level Bench Top Galvo Driven Fibre Laser Marking System complete with the full array of capabilities of the Minilase SE Software. The Minilase E has a small footprint, making it ideal for smaller components, instruments, jewelry, etc. It’s equipped with a 10-Watt Laser that can provide razor-sharp imaging and even excellent annealed marking capability to most metals and is also highly effective on a range of other materials such as plastics, ceramics etc. 
Quality is never sacrificed, the Minilase E is simply not equipped with as many extras. It uses a robust Lab Jack for manual Z-Axis Focal Height Adjustment. It is equipped with a built-in Focal Height Indicator. Given that it is a 10-Watt Laser, it will not be quite as fast or perform marking quite as deep as some of the other more expensive models, but it’s a very well designed Class I Marking System that offers the same level of Image Quality, Marking Speeds and Versatility that only Galvo Driven Laser Technology can offer.
The Minilase Pro SE Software still supports all the same Graphic Editing, Variable Data Control and Barcoding Capabilities as any of our other systems, it’s just been designed for smaller parts and to be at our most economical price point. If you have smaller parts to process, check out the Minilase E.
For more information on this and other Laser Marking Products, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.
T: (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#LaserMarking #LaserEngraving #LaserEtching #TYKMAElectrox#MinilaseE #MinilaseMarkers #MarkingProducts #MarkingSystems#PartMarking #MarkingMethods #MillenniumSignatures #MetalMarking#MarkingSolutions #FibreLasers #Minilase #MillenniumMarking

MACHINE-READABLE CODES

Did you know that the Marksman Computerized Dot Peen Marking Technology from Millennium Signatures Marking Systems Inc. gives you the ability to mark your parts with 2D Barcodes, Military Spec UID Codes and QR Codes as well?

2 DIMENSIONAL CODES (2D)
Marking a 2D Code directly onto your part using our Computerized Dot Peen or Galvo Driven Laser Processes allows you to enter data such as work order #’s, Part #’s Lot #’s, Date Codes, pretty much any data at all into the system and have it automatically convert that data into square code that our equipment will allow you to permanently mark onto your parts. This code can be scanned using just about any of today’s readily available scanning technology and even very reliably with free apps, you can download for your smartphone cameras. This eliminates the concerns for labels coming off and potentially losing track of what revision of part you actually hold in your hand. It will always be there and easily accessible. It makes it very easy to track and inventory parts and can be very helpful in communicating with processes as they travel through automated production lines. For example, you can have parts scanned as they go through a process and rejected if parts should somehow become mixed or parts that are a fail can be marked to permanently confirm such important details.

UID CODES
UID Codes are a unique format of this 2Dimensional (2D Code) Technology that has been designed by the Military for their products and is often expected of manufacturers who are bidding to get such contracts that they will have the capability to mark the parts they would produce using this unique 2D Symbology.

QR CODES
QR Codes can be equally powerful, perhaps even more so in many ways. 
A QR Code is essentially a Hyperlink to a URL Address or File. For example, if you host your QR Code with Millennium Signatures or even through other sources, you can permanently print a small square code onto your part that will remain there long after any sticker, plate or other methods of marking would be lost due to any one of several variable elements of conditions. 
When scanning this code, it can immediately pull up a website or take you to a drawing or a document such as an entire manual potentially hundreds of pages of content if need be. There is really no limitations.
As long as that code is being hosted, the scanning of the code can instantly link anyone it’s a Barcode Scanner or Smartphone with a wealth of information about that part or product and it’s all controlled by you.
This information could even be changed after the mark is made potentially. Allow us to explain…..

POSSIBLE SCENARIOS
You build an assembly for Natural Gas Furnaces and there is some information such as exploded parts view, parts number listing and some installation and safety guidelines you always want available to your client. 
This means when it’s NEW out of the box of when being pulled out of a 20-year-old Furnace under repair. You completely control what information is instantly (almost magically) provides to your customer when scanned. 
However….. 4 years after production of this part, it is determined that there is a defect in the parts from manufacture or there is some reason to recall the parts. It is possible to redirect where the link that code represents a different destination or a REVISED or UPDATED destination or document. For example, a technician in the field could now remove this part and scan it with his cell phone only to learn immediately that there is a recall notice out on that part and instructions on what to do about it as a result. It is incredibly powerful if you know how to use it to its full potential.

Both Millennium Signatures Galvo Driven Laser Etching / Engraving Technologies and our Marksman Series Computerized Dot Peen (Impact Stamping) process’ can provide such markings. The beautiful thing about these Codes is not only are they so easy to create and apply to the part, they are also very permanent. If you pull a dirty, greasy part of a piece of equipment, just give it a wipe off or a scuff with a Scotch Brite Abrasive Pad or something similar and give it a scan. It’s permanently on the surface of the metal, plastic, porcelain or almost any material and will almost always produce for you when needed.

For more information on these Marking Technologies and the Systems we sell allowing you to put these markings on your parts, contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
We have facilities in Buffalo NY, USA and Burlington ON, Canada and we are currently in the process of establishing facilities in Mexico.

Main line for inquiries
Tel: (905) 639-0909

E-mail Inquiries:
info@millenniumsignatures.com

Head Office Hours:
Monday through Friday
8:30am – 4:30pm (Eastern Standard Time)

#2DCodes #QRCodes #UIDCodes #CodeMarking#BarCodeScanning #2DCodeMarking#MarkingMethods
#MarkingProducts #JeffGuenther
#MarkingTechnology #Marksman
#TYKMAElectrox #GalvoLasers #DotPeenMarking#PermanentMarking #QRCodeMarking#MillenniumSignatures #Etching#PartMarkingServices #Engraving #PartTraceability#PartIdentification
#MetalMarking

The MS-990 AIR VIBRO ETCHING TOOL – Hand Held Pneumatic Pen designed for quiet, easy use when marking metals and plastics

MS-990 Air Vibro Etch Tool
MS-990 Air Vibro Etch Tool Ideal for permanent scribing on even hardened steels and plastics

AIR VIBRO ETCH MARKING PEN used for a variety of industrial Part Marking applications.
Since 1984 when we first launched the MS-990 Air Vibro Pen we have received incredible reviews from clients around the world who claim they have never found anything that compares. We have even offered other Pneumatic Scribing Pens and nothing has come close to the comfort, precision and

For all your Etching and Scribing needs, contact the Technical Sales Team at Millennium Signatures Marking Systems for more detailed information and pricing.

IN STOCK at both our Burlington, Ontario and Buffalo, New York facilities.

YEAR END SALE on Electro-Chemical Etching Equipment, Accessories & Supplies

Year End Sale - December 2016
YEAR END SALE on Electro-Chemical Etching Equipment, Accessories & Supplies

YEAR END SALE – Month of December 2016 only.

Save $269.25 INSTANTLY by purchasing a Chemical Etching Kit in the Month of December 2016

For the first time ever, Millennium Signatures is offering a special upgrade to a full marking kit on the purchase of Power Units made in the month of December 2016. Starting today, Thursday December 1st, 2016 you will receive a Full Marking Kit with any of our Power Units ordered and paid for up until December 30th, 2016.

Systems can be purchased using Cash, Company Cheque, PayPal, Visa or MasterCard.

Contact our Technical Sales Team and mention this promotion and submit a Purchase Order referencing this Face Book promotion and you will receive a FULL MARKING KIT Basic Group including One (1) Litre of our X4R-411 (General Purpose) Electrolyte, One (1) Litre Standard Neutralizer, One (1) Package of our 50150DE Double Felt Oil Free Monopads (10/Pkg), One (1) 50150 (1/2″ x 1-1/2″) Hand Marker Assembly, One (1) Standard 3ft Wire Cord Set (Red + Black), One (1) Standard O-ring Retaining Clip, One (1) Instructions Pamphlet, One (1) Set of corresponding MSDS/SDS Documentation and Certificates of Compliance are available upon request.

This is a particularly great opportunity for those looking to advance to a more capable unit and will gain the extra accessories and supplies or for first time buyers such as Custom Knife Makers or small Precision Machine Shops that are looking to acquire this capability for the first time.

Millennium Signatures Marking Systems Inc., has facilities in Buffalo NY, USA and Burlington ON, Canada and has a full inventory of equipment in both facilities at all times.  Contact our Technical Sales Team today and mention that you wish to benefit from this first time ever exceptional offering.

Contact Millennium Signatures by phone at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

#MarkingMethods #PermanentMarking #MillenniumSignatures #ChemicalEtch #LowStressMarking #MetalMarking #Etching #PartMarking #Monode #Electrolytes #Neutralizers #StencilPapers #ProductIdentification #Traceability #BarCoding #BatchCoding #ProductID