73XNW MARKING INK

What to know about 73X and 73XNW Series Aerospace Grade Marking Inks.

BASIC DESCRIPTION
This is our most versatile marking ink. For the past 20 years, it has been used by leading aircraft and space component manufacturers for general purpose marking. In space applications, the out-gassing characteristics are extremely low.

SPECIFICATIONS
When applied properly, the ink meets or exceeds the performance requirements of G.S.A Specification: A-A-208 TYPE I

WHERE TO BUY
Supplied by Millennium Signatures Marking Systems Inc., they are shipped from Buffalo, New York in the USA or Burlington, Ontario in Canada.

DANGEROUS GOODS
This product is classified as a “Dangerous Goods” product and in some cases will require some additional fees to cover costs associated with the special packaging, labelling, documentation of the product above and beyond the transportation fees themselves. This is unavoidable in a lot of cases

RECONDITIONER
Along with the Aerospace Grade Marking Ink which is available in a variety of colours, but always maintained in stock in BLACK, RED and WHITE if the 73XNW Grade “Reconditioner” which is the corresponding solvent which should be used to thin the 73XNW Series Marking Inks or used in Clean-up Applications. It is not a requirement that both be purchased, they are sold independent of one another, but it is recommended that you have Fresh Reconditioner on-hand if you are using the Marking Ink.

BASE
The base of this Marking Ink is Ethyl Alcohol. This is NOT a two-part Marking Ink. It is ready to use right out of the bottle unless it should need to be thinned out some using the Reconditioner to suit your application.

SHELF LIFE
When stored in a cool place in a sealed container it is stable for a minimum of one (1) year. However, periodic exposure of this ink to the air will cause it to become more viscous (thicken). The addition of the 73X Reconditioner will thin the ink back to a suitable consistency.

DRYING TIME
Room Temperature, humidity and ink film thickness all may have a significant effect in drying time. 
On average, however, the ink when applied with a rubber stamp and pad will dry to the touch in approximately 6 minutes.

CORROSION
Since this ink is NOT compounded with any toxic or harmful acids, it is non-corrosive on Aluminum Alloys, Magnesium, Stainless Steels, Titanium or many of the exotic Space Grade metals.

APPLICATION
It is recommended that the use of a Rubber, Cloth or Linen Type of Stamp in combination with a Stamp Pad is best. All of these items are available through Millennium Signatures Marking Systems Inc., and Custom Stamps can be shipped out within 24-48 Hours. 
Call (905) 639-0909 or e-mail our Part Marking Specialists at info@millenniumsignatures.com for more information. 
We are here to support your inquiries and can offer more detailed information about how best to apply your ink markings and get the best results!

COLOURS
73XNW Marking Ink is available in BLACK, Yellow, Silver, RED, Blue, Green, Orange and WHITE. We typically only focus on maintaining fresh batches of BLACK, WHITE and RED in stock at all times. However, if the other colours are needed, we can have them ready for shipping within a few days.

For all your 73XNW Inquiries, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#73XReconditioner #73XNW #73XNWAerospaceMarkingInk#LowOutgassingMarkingInk #MarkingInks #MillenniumSignatures#MarkingProducts #MarkingMethods #CustomRubberStamps #InkPads#MarkingMethods #AircraftMarking #MarkingSpecifications#MarkingSolutions #AerospaceGrade #ComponentMarking

A FRESH NEW LOOK!

There is so much going on at Millennium Signatures Marking Systems Inc. We are one of North America’s most comprehensive sources for Part Marking / Traceability Equipment, Marking Accessories and Supplies.

With two (2) modern facilities, one located in Burlington, Ontario supporting Canada from coast to coast and another in Buffalo NY, servicing the continental United States of America and Mexico, we field inquiries, service and ship products to companies throughout North America and various regions around the world every day. 
Our Part Marking Specialists can assist you with various methods of marking your products, including but not limited to the following: Steel Handstamps, Custom Engraved Steel Dies, Inserts, Type Holders and Roll Marking Dies to Custom Auto-Indexing Numbering Heads. We also Specialize in Electro-Chemical Etching (Chem-Etch) and always have lots of fresh Electrolytes, Neutralizers, Accessories plus Full Marking Kits in stock at all times.

Among our most popular products is our Marksman Series line of Computerized Dot Peen Marking Systems (Dot Peen / Pin Marking) Equipment. We also proudly sell, full service and support TYKMA Electrox built Galvo Driven Laser Marking Technology. It is the best of the best and we have incredible success with this dynamic range of products.

Custom Inks & Solvents, including approved Aerospace & Nuclear Grade Inks, Solvents and Polyurethane Top Coat Products.

As if that’s not enough, Millennium Signatures also prepares a range of different types of Stencils including Fabric Stencil used for the Etching Process, Custom Cut Mylar and Metal Stencils as used for a range of stencilling applications for everything from Metal Fabrications to Concrete Products and Construction uses.

One of our most unique offerings is our very effective Custom Part Marking Services Division. This is where we blend our 50+ years of experience together with the most State-of-the-Art Marking Technology available and equipment with great Customer Service Personel and a talented group in Artwork & Design department and we mark your parts for you. Anything from prototypes to large batches of product. We work daily with Aerospace & Nuclear Specifications and we communicate effectively using very modern photography equipment and optics to show you the marking results you will get throughout before we mark a single production piece. Today, one thing is for sure, everyone is in a rush and so we have designed and built an effective service that makes it possible for us to meet or exceed even the most demanding expectations we face. We have thought of everything when it comes to handling your parts! Contact our Part Marking Specialists and give us a try. We are proud of the scope and quality of work we deliver on day-in and day-out. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and check out our Marksman Series products on their own dedicated site by visiting: marksmanmarkingsystems.com

#MarkingSystemsCanada #MarkingSystemsUSA#MarkingEquipmentOntario
#MarkingProductsUSA #PartMarkingCAN #MarkingServicesBurlington#MarkingProductsBuffalo #EtchingProductsNY #CanadaMarkingSolutions#ProductTraceability #EngravingServicesOntario #SteelStampsOntario#StencilsUSA #MarksmanUSA #MilSigMarking #MarksmanCanada #LaserGearCanada

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

PARAMETER TESTING

When you purchase a TYKMA Electrox Built Laser Marking System we can provide you with a Parameter Testing Grid Program which will allow you to execute this marking program on a piece of the material you intend to work with. It will quickly guide you to the best Speed, Power and Frequency settings to get the desired level of contrast and clarity for your markings. 
An excellent tool for those new to using Galvo Driven Laser Technology. The technology is just amazing and it will likely surpass all your Part Marking / Product Traceability expectations. This little aid just makes your initial set-up that much faster and more accurate. 
Contact our Part Marking Specialists about this little (no charge) option. 
We can be reached Monday thru Friday from 8:30am to 4:30pm Eastern Standard Time. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

MARKING Done Right ✅

MARKING done right  can really enhance the overall perception of your product once in your client’s hands. Contact the Part Marking Specialists at Millennium Signatures Marking Systems for information on acquiring the right equipment for your application or how to utilize our Custom Part Marking Services and have us mark your parts for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

CUSTOM PART MARKING

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about Custom Part Marking Services also commonly referred to as “Contract Marking”. Since 1990 we have been selling, servicing and supporting Galvo Driven Fibre and CO2 Laser Marking Systems. 
Part marking services performed same day / next day in most cases. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and marksmanmarkingsystems.com

CUSTOM LASER SINTERED METAL NAMEPLATES

At Millennium Signatures Marking Systems Inc., we prepare Metal Nameplates and Signs to your exacts requirements. Various materials, various thickness, with holes and slots or without. Square corners or rounded corners, whatever you need. We have several processes including Aluminum Anodized Plates, Deep Etch & Fill on Steel & Aluminum, Engraved & Filled and our most popular process Custom Laser Sintered Metal Signs and Nameplates.
Our unique Laser Sintering Process uses a special formulation of granular ceramic materials baked into the cavity created while Laser Marking. This process is highly effective on Stainless Steel and Aluminum Plates and Products. 
The marking is approximately 0.004” in depth and the ceramic powder that is fused into the material provides a Beautiful even texture and great contrast! Laser Sintered Nameplates have been proven to meet the requirements of ASME Certified Shops and are far less expensive than the Deep Etch & Fill Process, especially when it comes to a variety of different variable data or low volumes. 
In addition to Custom Laser Sintered Nameplates, our Custom Part Marking Division also uses this process in some situations to custom mark our clients’ parts. It’s very pleasing to the eye. It’s very durable and most of all, it’s very versatile and cost-effective. 
Contact our Part Marking Specialists today about Laser Sintering or any of our Metal Sign and Nameplate Technologies. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or marksmanmarkingsystems.com

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

     

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

Galvo Driven Fibre Laser Marking Equipment for the Lowest Price its EVER Been!

The opportunity to buy really good Galvo Driven Fibre Laser Marking Equipment for the lowest price its ever been is now! The NEW Laser Gear Series presents an opportunity that for many, was far less attainable just a year ago.
The Laser Gear Series is a seamless new Benchtop Marking Solution that uses high-grade components and is carefully packaged to offer so much more than ever before.
At nearly half the price of similar systems, the Laser Gear Series has been developed specifically to give small business or lower volume users a very high precision piece of marking equipment with all the versatility needed for so many different marking applications. You truly get to pay less without compromising on quality, capability, or support. Millennium Signatures Marking Systems is very proud to be able to provide this product. Available in Class I and Class IV configurations in either 20-Watt or 60-Watt power output. Theses Fibre Lasers will definitely Impress!
Contact our Part Marking Specialists for more information on this exciting new series of Fibre Marking Lasers.

Custom Engraved Steel Stamps, Dies & Inserts

Millennium Signatures Marking Systems Inc. specialized in Product Identification and has a long history dating as far back as 1972 designing and producing Custom Engraved Steel Stamping Products along with associates tooling & fixtures.
Millennium Signatures uses original mechanical technologies as well as new EDM processes and computerized processes as warranted to produce high quality, long lasting Stamps and Inserts.
Only high-quality materials such as 01, A2 and D2 Steels properly tempered are commonly used to make our products to ensure the highest quality.
Segmented Type and Inserts are no problem to support your Roll Marking applications. Millennium Signatures is your one-stop source for product identification systems and accessories. Contact our Part Marking Specialists for more information.
T: (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com or Marksmanmarkingsystems.com

#SteelStamps #StampsandDies
#SegmentedSteelType #RollDies #SteelInsertType #NumberStamps #LetterStamps #IndentMarking #LowStressDies #SecurityStyleFont #EngravedStamps #SteelType #Eurotype #ImperialType #DotDesignStamps #2DEngravingSrrvices #3DEngraving #TypeHolders