FREE PICK-UP & DELIVERY

Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:

  • Stoney Creek
  • Hamilton
  • Brantford
  • Ancaster
  • Dundas
  • Flamborough
  • Waterdown
  • Burlington
  • Oakville
  • Milton

Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers. 
Millennium Signatures can make it easy! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
#MarkingDevices
#MarkingSystems

 

IN-HOUSE GRAPHIC ARTWORK AND DESIGN SERVICES

Our core business is to provide manufacturer’s with quality Marking Equipment and Systems to look after all their Product Identification requirements. Second to that is our Part Marking Services component of the business where our highly knowledgeable techs use the many technologies we sell, service and support to mark batches of parts for the customer as a contract service. 
Beyond that we offer Anodizing, Heat Treat and Stress Relieving Services, Sandblasting of small components and Custom Made Positive Locating Jigs & Fixtures. 
Central to many of these services is our in-house Graphic Artwork Department headed up by Carolyn. We can assist you by
preparing custom artwork for Fabric Stencils used in Chemical Etching, Logo’s and Barcodes for use with lasers, QRCode Generation for Laser and Dot Peen Marking Technologies and much more. 
Carolyn and her team can help you with all of your Graphic Artwork Needs. 
Contact our Part Marking Specialists and inquire 
T: (905) 510-3361
E: info@millenniumsignatures.com
W: millenniumsignatures.com

CONTRACT MARKING SERVICES

Our team goes to great effort to review our customer’s instructions in great detail and always get a First Article Photo approved before processing to give our customers EXACTLY what they want on their parts. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems if you are looking to purchase Marking Technology for your shop or need to have parts processed for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

CUSTOM METAL NAMEPLATES

When it comes to Metal Nameplates for your Pressure Vessel, Fabrication or Automated Assembly or any ID Plate requirement Millennium Signatures Marking Systems can do it all! We can provide basic Laser Etched Stainless & Aluminum Nameplates, our unique Laser Sintered Process, Anodized Aluminum, Screen Printed Metal Photo Processed, Mechanically Engraved Plates and Plaques and Photo-Resist Deep Etch & Fill all made to order. 
(ATTACHED PHOTO)
In the attached photo a client wanted the unique benefits of our Laser Sintering process but also needed an incredibly robust plate that could be bead welded all the way around to absolutely guarantee the information would never separate from its vessel. We were able to create this Plate from 0.250” thick stainless steel as per their specification start to finish in 3 days and that was regular production. 
Special circumstances and last minute RUSH cases come about daily in our business and we go to great strides to get our customers what they need when they need it. 
POPULATING VARIABLE DATA
In addition to making great plates quickly and at a great price point, Millennium Signatures can help you populate you’re variable data or produce you with a variety of different technologies which you can maintain in-house to populate the variable data on these plates on-demand! Visit marksmanmarkingsysystems.com for more information on the Computerized Dot Peen Marking Process (Also known as Pin Marking, Stylus Marking)

When it comes to Nameplates, Decals or any other methods of identifying your products, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com 
W: millenniumsignatures.com

#EtchedNameplates #EngravedNameplates #LaserSinteredNameplates#AnodizedNameplates #PrintedNameplates #LaserEtchedNameplates#MetalNameplates #SteelNameplates #AluminumNameplates#CustomNameplates #NameplatesCanada

COMBINATION MARKING

When using a Hand Held Portable Marker to stamp identification onto your parts, it’s easy when it comes to larger, heavier parts or assemblies and nothing could be better given the computerized solution that offers cord-free portability and comfort. However, it could be challenging or impossible to mark small components should the need arise. 
For this reason, Millennium Signatures introduces our Combination Marker Set-up. Combining our T-300 Base & Column used for some of our Bench Top configurations with our very popular MKP-054 Blue Tooth Enabled Battery Powered Hand-Held Marking Head now allows you to effectively holster that Portable Marking Capability quickly into a Bench Top Marker configuration making it very easy to mark small tools, couplings, valves or almost any small metal or plastic components that would have been hard to do with a portable previously. It also makes it useful for marking small Nameplates with great precision. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. To learn more about how to get more out of your Marksman Hand-Held Portable Marking System. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

DID YOU KNOW…

Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

BALL SCREW vs PRECISION REINFORCED COG BELT Driven Dot Peen Marking Systems

Millennium Signatures “Marksman Series” Computerized Dot Peen Marking Systems is a comprehensive collection of equipment models, all offering their own unique features and abilities. 
Among their many differences, they can be quite easily divided simply into two (2) groups just by the drive technology they are equipped with. 
We have the Precision Reinforced Cog Belt Driven models and the slightly higher-end Ball Screw Driven models. While it’s true the Ball Screw Technology does have some advantages over the Reinforced Cog Belt Driven models, don’t fall into the thinking that the Reinforced Cog Belt Driven Systems are inferior or not worthy for those of you who believe strongly in buying a good product and doing things right the first time!
It is true that Ball Screw is a little more precise and does have better registration, repeatability long term, but the reality is they really only show an advantage in some situations. For example, if you are doing Machine-Readable Codes all the time on a regular production basis and your markings are not only required to be clean, sharp and precise to the naked eye, but also to today’s world of high definition scanning technology, then yes there would be an advantage to going to a Ball Screw Design for the very best possible code generation. Ball Screw is also beneficial when it comes to longer distances as in the X or Y-Axis travel of your Marking Head. Our Model MH-250 Marking Head which features a larger marking area of 250mm (9,84”) x 250mm (9.84”) is an example of where we use the Ball Screw Drive mechanism because it allows for us to maintain a tighter tolerance over a greater span. If we build custom Marking Heads for a customer that cover an even larger span, naturally we would continue to stay with the Ball Screw Drive. 
Ball Screw is also a little longer lasting, so should your machine be running around the clock or performing a very high number of cycles every hour ongoing then this might be a reason to invest in the slightly more expensive Ball Screw Driven Technology. Ball Screw Systems also yield some additional benefit when marking really small characters. The extra precision of these units will start to show when marking characters under 2.0mm in height with one of our precision marking tips such as the PH-16 or the LP-06. 
However, eight or nine of every ten Computerized Dot Peen Marking Systems sold are based on the Precision Reinforced Cog Belt Driven Technology and it is not to be underestimated. It is remarkable the character generation and repeatability these systems provide, year after year. They are also highly proficient at Barcodes such as 2D Matrix, UID and QR codes, it’s only recommended to upgrade if these markings are very high in volume. 
When demonstrating these systems, most clients will not even ask to see the Ball Screw Driven models as they feel it is not at all necessary. The marking is extremely clean and the codes read perfectly. The feedback we get from clients that have owned these systems for years, consistently indicates that they continue to perform like new. There is no noticeable deterioration and they are very happy with the reliable, maintenance-free experience they have had.
We have a lot of great Marking Systems for you to see. Regardless which Drive Design you feel is right for you, Marksman Systems are extremely well designed, easy to use and very well priced. 
Contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#MarkingSystemsCanada #MarkingSystemsUSA #MarkingTechnologies#EngravingSystems #EtchingSystems #LaserMarking #PartMarkingCanada#PartMarkingNorthAmerica #DotPeenMarking #AerospaceMarking#MarkingProducts #MarkingMethods #BallScrewMarkers #BeltDrivenModels#Marksman #MarksmanMarkingSystems 
#MillenniumSignatures #MilSigMarking

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

     

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking