Having Custom Metal Nameplates made or populating the variable data on existing plates is fast, easy and very cost effective to do.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn about the different Nameplate Technologies we use to produce Custom Metal Nameplates and Decals to your exact specifications in just a couple days regardless of quantity.
** VISIT US AT EASTEC 2019 **
Some of our most popular processes include Photo Resist Deep Etch & Fill, Anodized Aluminum Plates, Screen Printed Plates, Laser Etched, Metal Photo, Laser Sintered and more…..
We also maintain a full stock of our Marksman Series Computerized Dot Peen Marking Systems and Small Bench-top Galvo Driven Laser Marking Technologies which are ideal for the fast, efficient creation or population of variable data on existing Pre-Printed Plates.
Contact our Part Marking Specialists for more information at:
T: (905) 639-0909
W: marksmanmarkingsystems.com or millenniumsignatures.com
Millennium Signatures has two (2) different sizes of Nameplate Holding Fixtures in stock which are adjustable and work with square or rectangular Metal Nameplates.
These fixtures get a secure hold on your plates and positively locate them to the top left corner while you populate the variable data on your Nameplates using Laser Etching, Computerized Dot Peen Marking, Computerized Engraving or Scribing Technologies.
We also made Custom Nameplates using several technologies and from various materials.
Contact our Part Marking Specialists to inquire about any of our Marking Systems, Accessories and Services.
T: (905) 639-0909
W: millenniumsignatures.com and
Galvo Driven Laser Marking Systems are truly impressive pieces of technology designed to provide incredible etching and engraving results on most materials. However, despite some materials may partially vaporize or it does not always appear to leave a lot of residue or byproduct, over time it does build up in and around your system. Very fine metallic particulate can scratch and are conductive and can get into your electronics and cause damage or overheat conditions, corrosion etc. Proper Fume & Particle Extraction Systems are not that expensive, they are more compact and quiet running than ever before. If you’ve invested anywhere between $25,000 and $60,000 into a high-quality Marking System, trust me when I say that another $3,200.00 is nothing compared to a few service calls or replaced electronic boards and modules and this can be completely avoided.
An extraction device will keep your facility cleaner, protect your Laser Marking Equipment, protect the health of your operators.
Our team of Laser Technicians sees this situation every day and the stark comparison to those systems that are properly equipped with the right Fume & Particle Extraction solution.
For more information contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.
T: (905) 639-0909
Did you know that the Canadian Airforce relies on Millennium Signatures’ supplied and supported Galvo Driven Fibre Laser Marking Systems to mark all their tools for aircraft maintenance nationwide?
They have to mark on tools of various materials in all shapes and sizes every day and our team makes sure they are equipped with the range of versatility they need to do the job!
The 40-Watt Laser System pictured here is now about 8 years old and operates trouble-free day-after-day, year-after-year.
For more information on how you can acquire similar equipment for your marking application, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.
T: (905) 639-0909
Our core business is to provide manufacturer’s with quality Marking Equipment and Systems to look after all their Product Identification requirements. Second to that is our Part Marking Services component of the business where our highly knowledgeable techs use the many technologies we sell, service and support to mark batches of parts for the customer as a contract service.
Beyond that we offer Anodizing, Heat Treat and Stress Relieving Services, Sandblasting of small components and Custom Made Positive Locating Jigs & Fixtures.
Central to many of these services is our in-house Graphic Artwork Department headed up by Carolyn. We can assist you by preparing custom artwork for Fabric Stencils used in Chemical Etching, Logo’s and Barcodes for use with lasers, QRCode Generation for Laser and Dot Peen Marking Technologies and much more.
Carolyn and her team can help you with all of your Graphic Artwork Needs.
Contact our Part Marking Specialists and inquire
T: (905) 510-3361
When it comes to Metal Nameplates for your Pressure Vessel, Fabrication or Automated Assembly or any ID Plate requirement Millennium Signatures Marking Systems can do it all! We can provide basic Laser Etched Stainless & Aluminum Nameplates, our unique Laser Sintered Process, Anodized Aluminum, Screen Printed Metal Photo Processed, Mechanically Engraved Plates and Plaques and Photo-Resist Deep Etch & Fill all made to order.
In the attached photo a client wanted the unique benefits of our Laser Sintering process but also needed an incredibly robust plate that could be bead welded all the way around to absolutely guarantee the information would never separate from its vessel. We were able to create this Plate from 0.250” thick stainless steel as per their specification start to finish in 3 days and that was regular production.
Special circumstances and last minute RUSH cases come about daily in our business and we go to great strides to get our customers what they need when they need it.
POPULATING VARIABLE DATA
In addition to making great plates quickly and at a great price point, Millennium Signatures can help you populate you’re variable data or produce you with a variety of different technologies which you can maintain in-house to populate the variable data on these plates on-demand! Visit marksmanmarkingsysystems.com for more information on the Computerized Dot Peen Marking Process (Also known as Pin Marking, Stylus Marking)
When it comes to Nameplates, Decals or any other methods of identifying your products, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.
T: (905) 639-0909
#EtchedNameplates #EngravedNameplates #LaserSinteredNameplates#AnodizedNameplates #PrintedNameplates #LaserEtchedNameplates#MetalNameplates #SteelNameplates #AluminumNameplates#CustomNameplates #NameplatesCanada
When using a Hand Held Portable Marker to stamp identification onto your parts, it’s easy when it comes to larger, heavier parts or assemblies and nothing could be better given the computerized solution that offers cord-free portability and comfort. However, it could be challenging or impossible to mark small components should the need arise.
For this reason, Millennium Signatures introduces our Combination Marker Set-up. Combining our T-300 Base & Column used for some of our Bench Top configurations with our very popular MKP-054 Blue Tooth Enabled Battery Powered Hand-Held Marking Head now allows you to effectively holster that Portable Marking Capability quickly into a Bench Top Marker configuration making it very easy to mark small tools, couplings, valves or almost any small metal or plastic components that would have been hard to do with a portable previously. It also makes it useful for marking small Nameplates with great precision.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. To learn more about how to get more out of your Marksman Hand-Held Portable Marking System.
T: (905) 639-0909
#PorrableMarking #MarksmanPortable #MKP054 #MillenniumSignatures#CombinationMarker #PortableBenctopMarking #MarkingSystems#MarkingProducts #MarkingServices #MarkingTools
#MarkingMethods #PermanentMarking #FabricationID
Millennium Signatures Marking Systems’ Facility in Burlington, Ontario is equipped with the latest models of TYKMA Electrox Galvo Driven Laser Marking Systems. We encourage those interested in this technology to call us and plan a visit to see this equipment in operation. We have Fibre Laser Technology of various sizes, wattages, Class I & Class IV configurations etc. We have highly experienced technicians who can test the various systems on your products helping you decide what is the optimal configuration for your exact needs. We are happy to demonstrate the equipment for you in a direct one-on-one consultation.
We have the Laser Gear Series, the Minilase and Zetalase Series as well the Scorpion Series Lasers.
Contact our Part Marking Specialists today and arrange an appointment
T: (905) 639-0909
#Minilase #MLM20 #LaserGear #LaserGearCube #LaserGearBoqx
#LaserMarkingSystems #LaserMarkingServices #LaserEngraving#LaserEtching #ScorpionRapide #Zetalase #MarkingProducts#MarkingSystems #MarkingMethods #MilSigMarking
#GalvoLasers #LaserMarkers #MarkingCanada #PartMarkingCanada#MillenniumSignatures #MinilaseXL
Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you!
T: (905) 639-0909
#TypeIIAnodizing #AnodizingServices #PartMarking #HeatTreatServices#PartMarkingCanada #PartMarkingUSA #MarkingServices#ContractMarking #PermanentMarking #EngravingServices #Anodizing#StressRelieving #MarkingMethods #MarkingDevices #MarkingSystems#LaserMarking #LaserEtching #MarkingSystemsandServices
There is that old saying “Do it once, do it right!” This is something that we really believe in at Millennium Signatures Marking Systems and we want to help you to consider the most important things when looking to purchase a new Laser Marking System for your Facility.
Q: Where is it made and who supports the equipment?
A: One of the things we see weekly is companies calling us in desperation with a laser system that was bought at auction or through a sister company from somewhere overseas and they can’t get quality support, anxious for us to offer instruction on the use of the system, configure or repair their system. Millennium Signatures only supports TYKMA Electrox built Laser Systems. If you want to be supported by the best, buy the best!
All Millennium Signatures, Laser Systems are produced in a very state-of-the-art, 100,000 square foot TYKMA Electrox facility in Chillicothe Ohio in the USA. Just as Millennium Signatures is as the Canadian arm of this global network, the other distributors worldwide are all extremely knowledgeable and have full field service capability and highly effective remote access support, we all stock spare components and all have strong access and communication to the technical assets on the factory floor. The distribution partners not only have excellent support from the factory level but also work to support and back each other up making sure that all our end-users get the support they need. You will not find a larger more experienced support network behind any competitive Galvo Driven Laser Marking Product.
Q: What is the warranty coverage of the system you’re looking at?
A: It’s true, the best-built products are backed by the best warranties!
All TYKMA Electrox built Laser Systems with the exception of the Laser Gear Series are backed by a comprehensive 3-Year Warranty. The Laser Gear Series is our entry-level line of lasers which are carefully designed to be available at a reduced price point to make the purchase of Laser Technology a bit easier for some and done without giving up quality or too much capability. For these reasons the Laser Gear line is fully supported for 18-Months from the time of delivery.
Q: Is it easy to use? My facility is fairly remote from urban centres, will I need to spend a lot on on-site Installation and Training?
A: We approach this situation on a case-by-case basis. If you want us at your facility, we will be there! Some costs will be involved if travel is necessary, but most lasers are received, unpackaged and set-up by our customers without the physical presence of a technical on-site. The systems are very easy to set-up and use. Everything from the way the packaging is designed for transport to the way Software and Drivers is installed has been carefully designed in consideration of this situation. You will always be supported with whatever level of service you require, but the technical team at Millennium Signatures and the Technical Team of TYKMA Electrox behind them are highly experienced with how to walk new customers through the basic steps and getting them operational quickly. Let’s not forget about the series of professionally made, easy to follow video tutorials that come on the flash drive included with your system. Plug it into a USB Drive, select one of the nine (9) basic descriptions of the task you want to know about and press play!
Even for those who are not feeling confident about taking on this new technology at all, the well-written and well-organized manual, along with video tutorials, telephone support from our technicians and highly effective remote access to your system on-site, most clients are very surprised just how easy it is and how quickly we can have you up and running. We can even offer a completely loaded and pre-configured Lenovo Business Grade Laptop be sold with your system making it so it just could not be any easier coming out if the box.
At Millennium Signatures, you are always welcome to supply us with sample parts before you receive your system and we can assist you by creating some positive locating fixtures and part marking layout files in advance and sending them with your system allowing you to potentially start production marking within an hour of opening the box!
All perfectly pre-configured and tested back at one of our facilities for a plug and play start-up!
GALVO DRIVEN Laser Technology is always the way to go. It’s a little more expensive than Flat Bed Flying Optic based machines but far outperforms and outlasts those highly mechanical systems. TYKMA Electrox Lasers are proven time and time again to be extremely fast, reliable and maintenance free. Contact the Part Marking Specialists at Millennium Signatures Marking Systems for more information
T: (905) 639-0909
#LaserMarkingCanada #TYKMAElectrox #LaserEtching #MarkingSystems#MarkingProductsCanada #LaserMarkingTechnology #GalvoLasersCanada#MilSigMarking #PartMarkingCanada #MinilaseCanada #LaserGearCanada#LaserMarkingServices #LaserMarkersCanada #MarkingMethods#PermanentMarkingCanada