EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

73XNW MARKING INK

What to know about 73X and 73XNW Series Aerospace Grade Marking Inks.

BASIC DESCRIPTION
This is our most versatile marking ink. For the past 20 years, it has been used by leading aircraft and space component manufacturers for general purpose marking. In space applications, the out-gassing characteristics are extremely low.

SPECIFICATIONS
When applied properly, the ink meets or exceeds the performance requirements of G.S.A Specification: A-A-208 TYPE I

WHERE TO BUY
Supplied by Millennium Signatures Marking Systems Inc., they are shipped from Buffalo, New York in the USA or Burlington, Ontario in Canada.

DANGEROUS GOODS
This product is classified as a “Dangerous Goods” product and in some cases will require some additional fees to cover costs associated with the special packaging, labelling, documentation of the product above and beyond the transportation fees themselves. This is unavoidable in a lot of cases

RECONDITIONER
Along with the Aerospace Grade Marking Ink which is available in a variety of colours, but always maintained in stock in BLACK, RED and WHITE if the 73XNW Grade “Reconditioner” which is the corresponding solvent which should be used to thin the 73XNW Series Marking Inks or used in Clean-up Applications. It is not a requirement that both be purchased, they are sold independent of one another, but it is recommended that you have Fresh Reconditioner on-hand if you are using the Marking Ink.

BASE
The base of this Marking Ink is Ethyl Alcohol. This is NOT a two-part Marking Ink. It is ready to use right out of the bottle unless it should need to be thinned out some using the Reconditioner to suit your application.

SHELF LIFE
When stored in a cool place in a sealed container it is stable for a minimum of one (1) year. However, periodic exposure of this ink to the air will cause it to become more viscous (thicken). The addition of the 73X Reconditioner will thin the ink back to a suitable consistency.

DRYING TIME
Room Temperature, humidity and ink film thickness all may have a significant effect in drying time. 
On average, however, the ink when applied with a rubber stamp and pad will dry to the touch in approximately 6 minutes.

CORROSION
Since this ink is NOT compounded with any toxic or harmful acids, it is non-corrosive on Aluminum Alloys, Magnesium, Stainless Steels, Titanium or many of the exotic Space Grade metals.

APPLICATION
It is recommended that the use of a Rubber, Cloth or Linen Type of Stamp in combination with a Stamp Pad is best. All of these items are available through Millennium Signatures Marking Systems Inc., and Custom Stamps can be shipped out within 24-48 Hours. 
Call (905) 639-0909 or e-mail our Part Marking Specialists at info@millenniumsignatures.com for more information. 
We are here to support your inquiries and can offer more detailed information about how best to apply your ink markings and get the best results!

COLOURS
73XNW Marking Ink is available in BLACK, Yellow, Silver, RED, Blue, Green, Orange and WHITE. We typically only focus on maintaining fresh batches of BLACK, WHITE and RED in stock at all times. However, if the other colours are needed, we can have them ready for shipping within a few days.

For all your 73XNW Inquiries, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#73XReconditioner #73XNW #73XNWAerospaceMarkingInk#LowOutgassingMarkingInk #MarkingInks #MillenniumSignatures#MarkingProducts #MarkingMethods #CustomRubberStamps #InkPads#MarkingMethods #AircraftMarking #MarkingSpecifications#MarkingSolutions #AerospaceGrade #ComponentMarking

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

     

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

We can Handle your Delicate Parts!

Even parts that need to be handled very delicately to avoid scratching or other forms of damage can be processed reliably by Millennium Signatures Custom Part Marking Division. Our operators are highly experienced and trained to follow customer instruction properly, unpacking and repacking parts such that they are ready to put in your customers hands. 
Special non-slip gloves are used to handle parts and protect the operators. Parts are unpackaged on special tables which protect sensitive surfaces and prevent parts from being dropped or accidentally knocked onto the floor. 
Fixtures and nesting apparatus are often made of Nylon or covered with Felt to protect the parts. We do all that we can to protect your parts and take the processing of your parts very seriously. Send your parts to our facility for marking and check one more thing off that bottomless to do list. 
Contact our Part Marking Specialists to learn more about how best to proceed. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millenniumsignatures.com

73XNW MARKING INKS

Do you process Aerospace Components which require 73XNW Marking Inks & Solvents? Polyurethane Protective Top Coat Products Perhaps?

PART MARKING SYSTEMS & SERVICES, it’s what we do!

IDENTITY CRISIS?

Millennium Signatures at its roots was Chem-Etch and Stamp going back almost 50 years to 1972. In those early years, the company was a leader in Electro-Chemical Etching and Steel Stamp & Die Processes and still is today. In 1987 the company took on the Distribution, Integration and Servicing of Computerized Dot Peen Marking Technology which was completely NEW at that time. It was in 1990 that a separate division of the company was formed and “Canadian Laser Technologies” was created to focus on designing, building and integrating Galvo based Nd:YAG and CO2 Lasers. 
It was in 2003 that the company invested extensively in new facilities and new products and completely rebranded to become Millennium Signatures Marking Systems. A complete full-service solution for all your Part Marking and Product Identification needs. We have accumulated such an extensive client base that we expanded our focus even further and in 2006 we did a deep dive into the formulation of Custom Inks and Solvents (Printing Ink) to support Direct, Offset and Inkjet Marking System use. 
Today we have multiple facilities and deal with manufacturers from virtually every sector of the manufacturing world right around the globe. The bulk of our business is throughout North and South America but we do supply product throughout Europe and many Baltic Countries also. 
Today we still come across long time Etching Customers that did not know we supplied and supported Lasers, likewise some Laser customers were surprised to find we are also one of the leading sources of Computerized Dot Peen Marking Equipment and so on. So we are looking to set the record straight and let everyone know the extensive range of products & services that we provide. We stock everything needed for technical support services on everything we sell and have great technicians throughout North America to support our customers with after-sales technical support. 
Today at Millennium Signatures Marking Systems Inc., we specialize in all of the following products and maintain product on the shelf for quick availability. These Products and Services include:
Custom Engraved Steel Stamp & Die, Custom Tooling & Fixturing, Computerized Dot Peen Marking Systems in Bench Top, Portable and Compact Integrator Series Marker formats, Custom Formulated Industrial Inks & Solvents including Aerospace Marking Inks & Polyurethane Protective Top Coat Products. 
We also are highly specialized in Fibre and CO2 Galvo Driven Laser Marking Systems, Electro-Chemical Etching, Custom Cut Stencils, Laser Sintered Signs, Vibro Etch and Scribe Marking Technologies and we are a Manufacturer of Custom Steel & Aluminum Nameplates and high-quality Self-Adhesive Labels and Decals. Then, of course, is our very popular Custom Part Marking Services Division which you can read all about by searching #CustomPartMarking and #ContractMarking. We need to service companies with a multitude of complex requirements and we are not going to talk a customer out of a Dot Peen Marking System to sell a Laser as a Laser Company would and vice-versa. We will provide you with the solution that is right for you meeting your specifications and keeping you within your budget.

So to summarize, we are a complete Marking Systems & Services Solutions company and we are very proud of all we have accomplished over the years and thankful for the thousands of customers who choose to have us support their Product Identification processes.

If you have any questions about how we might be able to assist you, please contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsystems.com

#PartMarking #Engraving #DotPeenMarking #DotPeen #LaserMarking#Marksman #MillenniumSignatures #MarkingProducts #MarkingDevices#AutomatedMarking #CustomInks #CustomNameplates #ChemEtch
#PermanentMarking #MarkingMethods #MarkingSystems #PartIdentification#JeffGuenther
#VibroMarking #FibreLaser #ChemicalEtching #PartMarkingSpecialists#SteelStamp

WAIT!

We really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks

Does your company use a lot of Marking Ink for Inkjet, Direct or Offset Printing processes?

Millennium Signatures Marking Systems Inc. can produce Marking Inks made to your exact specifications for all your ink print applications. We can take a sample of your existing ink or solvent and reverse engineer it to determine your exact requirements and produce the exact same product at potentially a much better price point. We can handle supplying the Marking Inks in small or large volume containers and cartridges. 
We support a lot of continuous marking applications such as Tube Marking, Extrusion Marking, Steel Strapping, Carpeting and more. 
We also have Aerospace Grade Marking Inks and Polyurethane Top Coat Products in stock!

Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn more about our Custom Inks & Solvents Division. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#CustomInks #MarkingInks #Solvents #PermanentInks #MarkingProducts#MarkingSystems #MarkingMethods #AerospaceMarkingInk 
#73XNW #73XNWBlackInk

HELPFUL MARKING TIPS SERIES: High Contrast Marking on Stainless Steel using Chemical Etching

High Contrast Marking on Stainless Steel using Chemical Etching

One of the most common materials to Electro-Chemically Etch is Stainless Steels. It’s used for so many products from Medial Appliances and Food Preparation Equipment to Pressure Vessels and Nuclear Hardware etc.
One of the things we are asked for most often is how to create a high contrast BLACK permanent image on Stainless. Well for a very long time it’s been quite easy to get a good high contrast marking on Stainless steel and there are many Electrolytic Solutions that can help you obtain these results. However, Millennium Signatures X4R-428 Electrolyte Solution is unique in this area. Unlike the brown coloured markings, you tend to get with other formulations, our X4R-428 Electrolyte delivers a Black result that has definitely impressed those who have long been searching for a better result in this area. This Electrolyte can be used with any of our Power Units or Electro-Chemical Marking Kits.
Commonly sold in 1-Litre Bottles
Also available in 5-Lite Containers. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems by phone at (905) 639-0909 or by e-mail at info@millenniumsignatures.com for more information. MSDS Documentation is available for all Electrolyte and Neutralizer Products
#BlackMarkingOnStainless #HighContrastMarking #BlackEtchOnMetals#PermanentMarking #MarkingMethods #MarkingProducts#MarkingSolutions #MarkingOnStainless #BlackEtchIngOnSteel#ChemEtch #LowStressMarking #MillenniumSignatures #JeffGuenther#MillenniumMarkingTips

 

COST EFFECTIVE, STRESS-FREE PERMANENT MARKING ON METALS

Millennium Signatures Marking Systems Inc. is your complete source for everything Electro-Chemical Etching as well as many other Marking Technologies. We have a range of High-Quality Production Grade Power Units, designed to suit applications from very light duty (periodic use) such as Custom Knife Making applications to Heavy Duty Deep Etch applications for Aerospace and Nuclear industry requirements. Millennium Signatures (Formerly Chem-Etch & Stamp of Canada Ltd.) has been in the business for 50 years and has Electrolytes that meet all the major Aerospace Manufacturer Specifications. 
You can count on Millennium Signatures to have Stencil Paper Products, Monopads, Electrolytes and Neutralizers in stock. We also make Custom Non-Conductive /Non-Scratch Grounding Fixtures, custom Carbon Heads, Marking Kits and more… We also manufacture Long Life Fabric Stencils and have an in-house artwork department that can assist you with any graphic requirements you have and help you to get your custom product processed and out the door within just a couple of days. No matter what your requirement may be, if you’re looking to use the Electro-Chemical Etch Process to identify your parts or even for Grid Marking Applications as seen in the metal forming industry, Millennium Signatures will have the expertise and products you need.
Contact one of our Part Marking Specialists today for more information by calling our main inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com
We have facilities in both Buffalo NY, USA and Burlington ON, Canada. You can always visit our website at www.millenniumsignatures.com