S73XNW / 73X NW / 73X SERIES MARKING INKS

Millennium Signatures 73XNW Aerospace Grade Marking Inks which are suitable for use as Inspection Stamp Identification Ink for “reduced out-gassing applications” are readily available as we keep fresh-made batches on the shelf at all times. We can offer this ink which is designed to meet several Aerospace Specifications including BAMS 516-007 TY.I CL.A, BAC 5307, PCS 6000, 2ZZ900006 and more…
It is available in BLACK, WHITE, RED, BLUE, SILVER, GREEN and ORANGE.
We can provide technical specification on its Application, Storage, Details on Adherence, Drying Time, Shelf Life, Out Gassing Characteristics as well as Certificates of Compliance and MSDS/SDS Data

Recommended storage temperature is 65 to 85 Degrees Fahrenheit

When properly applied, this ink meets or exceeds the performance requirements of G.S.A. Specification: A-A-208 TYPE I

73X RECONDITIONER
We also sell the corresponding solvent known as “Reconditioner” This product is the properly matched solvent allowing the 73X Series Marking Ink to be thinned out for application, refreshed as it starts to age and also very important for clean-up application. If mistakes are made during application you want to have the proper solvent on hand to allow it to be easily removed before trying again.

For more information on this and other Marking Systems & Services geared to suit the needs of all industries including Aerospace, Nuclear, Medical-Surgical, Oil & Gas, Automotive, Welding & Fabrication Industries and many more, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.

Tel: (905) 639-0909 Local
Toll Free: (833) 219-1212
E-mail: info@millenniumsignatures.com
Website: https://www.millenniumsignatures.com
https://www.marksmanmarkingsystems.com

#73XMarkingInk #73XSeriesInk #73XNW #S73XNW #AerospaceGradeMarkingInks #MarkingInks #IndustrialMarkingInks #CustomRubberStamps #DryInkPads #CustomCutStencils #MarkingProducts #PermanentMarking #EtchingSystems #AerospaceMarking

 

CO2 LASER SYSTEMS AND SERVICES

Have a wood working project that would be just that much better if you could have beautiful engraving or personalize the product? Contact Millennium Signatures Marking Systems and ask for the Custom Part Marking Services Division. We are specialists in product identification and are equipped with many different technologies from which we can mark almost anything! Contact the Part Marking Specialists at
Millennium Signatures Toll Free at
(833) 219-1212 or (905) 639-0909 (Local). We welcome you to send your inquiries to us at info@millenniumsignatures.com

MARKING SYSTEM REPAIRS

At Millennium Signatures Marking Systems we have a 3,000 square foot facility in Burlington, Ontario where we can perform even the most complex repairs to any of the products we sell. We have well-trained Technicians and all the Tools, Instruments and huge inventory of Replacement Parts on-hand in case they’re needed to help you get your Computerized Dot Peen Marking System, Galvo Driven Laser Marking Equipment or Electro-Chemical Etching Machines and so much more back up and operational quickly.
Despite selling some of the most reliable, hardworking equipment the industry has to offer, we often service requests to have old equipment overhauled as a means to support newer equipment as a back-up or pretty much any scenario leaving your company in need of Marking Equipment repairs.
We also service TYKMA Electrox Laser Systems and all Marksman Computerized Dot Peen Marking Systems.
For more information, contact one of our Part Marking Specialists at Millennium Signatures Marking Systems today by calling Toll Free
1-(833)-219-1212 or use our local at (905) 639-0909
You can also e-mail us at
info@millenniumsignatures.com

#MarkingSystems #Marksman #EngravingEquipment #MarkingProducts #LaserMarking
#MarkingMethods #MarkingEquipment #JeffGuenther
#DotPeenMarking #EtchingSystems #PermanentMarking #PartMarkingSpecialists

SIGNS & NAMEPLATES –

Made Fast!

Millennium Signatures Marking Systems Inc. is perhaps best known for our Galvo Driven Laser Marking Technologies, Computerized Dot Peen Marking and Electro-Chemical Etching processes, but we perform a lot of Custom Services every day to provide fast cost-effective solutions to manufacturers who just need a problem taken off their hands and done right and done fast! Among our many services, we can be called upon to make simple signs out of a variety of materials. We produce Custom Nameplates using a variety of processes also on a wide range of materials. Then there are our Custom Part Marking Services which make life so easy for a lot of manufactures. We mark your parts to specifications for you. We routinely work to Aerospace and Nuclear Specifications and have solid processes and procedures in place to make sure your parts are marked perfectly every-time. We will turn them around quickly and at a price likely far better than your own in-house processing costs due to our expert range of equipment and expertise.

For more information on what we can do for you, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Local: (905) 639-0909
Toll Free: (833) 219-1212
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#PlasticSigns #MetalNameplates #MetalTags #EtchedMetalTags #LaserSinteredNameplates #CheckTags #AssetTags #EngravingServices #ContractMarking #CustomPartMarkingServices #LaserEngraving #LaserMarking
#CustomStencils #CustomCutStencils #MetalStencils #PlasticStencils

#LamacoidSigns #LamacoidNameplates

CUSTOM CUT STENCILS

   

Millennium Signatures Marking Systems Inc., just assisted one of our favourite neighbours “Viking’s Landing” in Burlington Ontario with some Custom Cut (Disposable) Oil Board Stencils to make some fun new targets ahead of their promotional segment on CHCH Morning Live with Tim Bolen. Traditionally they use a typical series of circles with a red bullseye, but to celebrate our local newscasters visiting they decided to shake things up a little.

Millennium Signatures can cut stencils to suit a variety of applications from Concrete Products, Pressure Vessels and Wall Murals to Wooden Shipping Crates and Axe Throwing Targets!
There are so many applications.
Cost-effective and very fast turn-around times.
We can produce stencils in a variety of sizes and cut from almost any material including, most commonly Oil Board, Mylar, Acrylic, Brass, Aluminium and Stainless Steel.
For more information on Custom Cut Stencils, please feel free to contact our in-house Artwork Department or any of our Part Marking Specialists
By phone: (905) 639-0909
Toll Free: (833) 219-1212
E: info@millenniumsignatures.com

TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

SCAN YOUR WORK ORDER

MARK YOUR PART. THAT SIMPLE!

We have now made it easier using our Marksman Series Dot Peen Marking Systems to scan a Barcode on a Work Order or Traveller and print the Human Readable data within that code directly onto your part using our App for your Smart Phone or Mobile Device. It’s a process we’ve been able to offer in the past, but never with such speed, ease and simplicity.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. Toll-free at (833) 219-1212 or by using our local at (905) 639-0909.
Inquiries can also be e-mailed to info@millenniumsignatures.com

#MarksmanMarkingSystems #MarksmanApp #MarkingSystems #MarkingTechnology #MillenniumSignatures #PartMarking #EngravingSystems
 #MarkingMethods #PermanentMarking #DotPeenMarking #PinMarking
 #JeffGuenther #PartMarkingSpecialists

METAL NAMEPLATE IDENTIFICATION

Millennium Signatures Marking Systems can help you with every aspect of this process. We manufacture Custom Metal Nameplates from a variety of materials using a host of different processes. We can efficiently handle processing low volume applications such as a single plate or thousands. We have the following processes to work with, Photo-Resist Deep Etch & Fill, Metal Photo, Anodized Aluminum Plates, Mechanically Engraved, Laser Etched, Laser Sintered and basic Screen Printed Plates.

POPULATING VARIABLE DATA
In addition to making plates from scratch, we have our very impressive Marksman Series Computerized Dot Peen Marking Technology allowing us to mark the variable data on your plates to drawing for you or supply you with the right Machine Model and Tooling to do the work yourself in-house.

Millennium Signatures is your complete source for Part Marking and Traceability processes. Contact our Part Marking Specialists toll free at
(833) 219-1212 or using our local at (905) 639-0909. You can always send in your inquiry complete with drawings and photos as required to info@millenniumsignatures.com

#Nameplates #MetalNameplates #EtchedNaneplates #PopulatingNameplates #EngravedNameplates #PrintedNameplates #NameplateMarking #NameplateStamping #Marksman
#DotPeenMarking #MillenniumSignatures #PartMarkingSpecialists #MarkingSystems.

 

ENGRAVING SERVICES

Allow Millennium Signatures Marking Systems Inc., to assist you with your engraving needs. Millennium Signatures sells the Marking Equipment to end-users as well as assisting clients with various Marking Processes through our Custom Part Marking Services facility. We are equipped with many different technologies including Mechanical, Computerized Rotary Cut and Laser Engraving Technologies. We also have Galvo Driven Fibre and CO2 and Flatbed Flying Optic Technologies with Rotary Axis for doing Cylindrical or Circumferential Marking of Cylinders and other round products. We have a large array of the best equipment in the industry and expert operators and technicians in-house supported by a Graphic Design Department to ensure the highest quality output. We take in and process jobs daily Monday through Friday every week turning out the best results at great prices and with impressively fast turn-around times.
Call our Part Marking Specialists Toll Free at (833) 219-1212 or using our local at (905) 639-0909
You’re always welcome to send inquiries in via e-mail at info@millenniumsignatures.com

MARKING SYSTEMS & SERVICES

Millennium Signatures is 100% focused on how to get the best marking possible on your parts. The world of identification is so powerful today and we can help you use the latest in Marking and Coding technology to meet all your customer requirements and promote and market your products better!
Millennium Signatures Marking Systems Inc. knows how to meet various specifications and routinely works with the Food, Drug and Pharmaceutical Industry, The Aerospace Industry, The Oil & Gas Producing Industries, The Nuclear & Power Generation Industry, The Automotive Industry and The Steel Industry among others. As a complete Product Identification & Traceability Company, we manufacture and/or distribute many technologies from Custom Engraved Steel Stamp & Dies to Electro-Chemical Etching, Computerized Dot Peen Marking, Computerized Engraving and Galvo Driven Laser Marking Systems. We formulate Custom Marking Inks & Solvents for direct, offset and Inkjet Marking applications. We manufacture Metal Nameplates custom to suit the exact needs of the customer, we produce Custom Cut Rubber Stamps & Dies and an extensive range of Custom Cut Stencils from Mylar, Oilboard, Plastics and various Metals. It’s hard to make mention of all the bases we have cover to help look after all of your Part Marking requirements.

Give us a call. Our Part Marking Specialists are here to review your requirements and assist you.

Call us Toll Free at (833) 219-1212
or using our local (905) 639-0909
You’re always welcome to reach us anytime by e-mail at info@millenniumsignatures.com

#PartMarkingSpecialists
#EngravingServices
#LaserEtching #LaserMarking
#ContractMarkingServices #PermanentMarking #MarkingProducts #MarkingEquipment #MarkingMethods #MillenniumSignatures #JeffGuenther #MarkingInks #Nameplates