CUSTOM PART MARKING SERVICES

HISTORY

Millennium Signatures Marking Systems Inc. has an extensive history of selling and supporting Part Marking Technologies or Traceability Systems to the Manufacturing sector going back as far as 1972. Despite that its principal business is to sell, integrate and support the various methods of marking, we also have a very successful Custom Part Marking Division which has been servicing hundreds of clients for almost 15 years now. We have taken our extensive knowledge of Part Marking practices and our impressive range of equipment and made our services open to any clients who do not wish to invest in the technology for one reason or another or who wish to essentially get their products out onto the field and trial the marking results before committing to a process. There are many advantages to outsourcing your marking even if just initially. Let us do the hard work for you.

EXPERTISE

Those staffing the Millennium Signatures Custom Part Marking Division have extensive knowledge of how to work the various technologies and work to even the most rigid specifications. We can take on the marking of complex part configurations much more effectively that someone new to the process. Our pricing is very effective, and our turn-around times are said to be “excellent” based on feedback from our existing client base. Some of our clients bring their parts to us because they’re volumes are too low to justify an equipment purchase, others just don’t have the time or expertise. However, our Custom Part Marking Services provides another very valuable option for those considering buying their own equipment.

ADVANTAGES

If you send your parts to Millennium Signatures Marking Systems for processing, we will design proper fixturing that will positively locate and secure your part during the marking process. We will create layouts and programs allowing the chosen technology to execute the marking sequence properly and we will always provide First Article Samples or detailed photos to the client before proceeding with marking a batch of their parts. You can pay us to mark a single batch of your parts or you can bring us batches of parts for marking for years and years. When you’re ready to make a purchase, Millennium Signatures will not only outfit you with the proven hardware selection we use to process your parts, but we will bring our NEW equipment to your facility, install it and train your operators. The beautiful thing is that we will hand over all the fixtures, programs, layouts, stencils, artwork or any other production aids that we used to mark your parts, so you are now instantly in production. You will have absolutely everything you need to make the perfect impression from the time we walk out of your facility. Going about it in this way allows you to get the marking you need to be done (by professionals), it allows you to see and experience the results before committing to any significant cash outlay and there is never any expectation of an equipment purchase. However, if you do you will know you are selecting the right equipment for the job and you will be provided with absolutely EVERYTHING you need to get started.

PROCESSES

Our Custom Part Marking Services Division offers the following technologies which can be used to mark your parts, Electro-Chemical Etching, Engraving, Computerized Dot Peen Stamping, Ink Marking and both Fibre and CO2 Laser Marking. If you are not sure which technology is best for your application, contact our Part Marking Specialists at info@millenniumsignatures.com or by phone at (905) 639-0909 and have us evaluate your application properly and give you our recommendations.

RECOMMENDATIONS

It is strongly recommended that if you are having us process your parts for the first time, that you provide us with extra parts, scrap parts or spares. It is always best to have an actual part that we can set-up and test with before starting to run production on a good batch of parts. If a spare part is not available, it is quite possible we can still get you a perfect marking from the start, but a close second would be to get a sample piece of the very same material and surface condition as the actual parts we would be expected to mark.

If absolutely nothing is available, it is likely with our expertise that we can still get you a highly acceptable marking the first time, but it’s a much more challenging task for us and it may take longer or the first part or first few parts of that batch may be less than ideal before we manage to dial the settings in just right to secure a perfect marking for all the rest. There is no other alternative, however with all that we see on any given day our chances of getting a highly acceptable mark is much better than for most anyone else.

POLICIES

We often see hundreds and sometimes thousands of parts processed in our facilities each day. We have an unbelievable record for accuracy and acceptability among our clients, but things can happen for a multitude of reasons ranging from very confusing instructions from clients to inconsistencies in the product to hardware/software failures and on occasion even human error. We have created a process whereby we evaluate the client’s job, we review the materials sent. We prepare a sample and we either send the sample to the client for an approval (if time permits) or in most cases, we are asked to take good quality close-up images of the marking results and transmit them electronically to our clients for review and approval before proceeding onto multiple parts. If an error takes place that is deemed to be the fault of Millennium Signatures Marking Systems role in the processing of parts, Millennium Signatures limits its liability to the cost of remarking parts only. Millennium Signatures Marking Systems Inc. is to be in no way held responsible for the costs associated with removal of unwanted markings, recoating, reworking or replacement of customer supplied parts. There is simply too many variables and an extreme range of different products and circumstances for Millennium Signatures to take on such responsibility. Given, such circumstances, our team takes our responsibility very seriously and treats all customer supplied components with the highest levels of care and consideration.

PACKAGING & HANDLING

Please consider that we appreciate that expensive parts that are time-consuming to produce need to be protected and need to be transported carefully. Out of respect to our clients, we go through a series of procedures to ensure that our client supplied products are handled in such a manner that accidental dropping or scratching etc. is minimized if not eliminated. Our processes include handling the part as little as possible, working over anti-fatigue matting on floors and workbenches to cushion any unexpected impacts. We take the parts from any protective packaging, mark the part to specification and return immediately to the same packaged state they are received unless instructed in writing to do otherwise. Our fixturing is custom made on-site out of Plastics, Acrylics and Nylons to prevent scratching or scuffing of parts while being processed. We even wear gloves and can use a lint-free microfibre polishing cloths to clean up parts of any fingerprints if they are decorative parts such as chrome fixtures etc.

CUSTOM MARKING REQUESTS & INFORMATION

If you are thinking of having our Part Marking Specialists process some of your parts for you, please call us at (905) 639-0909 or send us an e-mail at info@millenniumsignatures.com. Allow us to answer your questions, quote on your requirements and discuss your special requirements. We see all kinds of unique requirements daily and we are confident we can accommodate yours.

 

CUSTOM CUT STENCILS – All Materials

There are many different industries that use our CUSTOM CUT STENCILS for one application or another and Millennium Signatures is a Fast and Cost-Effective source for all your stencilling needs. At Millennium Signatures we have the technology to create Custom Cut Stencils from a wide range of materials including, but not limited to Stainless Steel, Brass, Aluminum, Copper, Plastic, Mylar and Oilboard, custom to your specifications.
These stencils could be used for marking everything from Highway Construction Barriers, Shipping Crates, Overhead Pipe, Entrances and Exits, Apple Crates, Aircraft Components etc. If you need having a stencil created for a Marking Application including even Chemical Etching or VIN Etch Stencils, give us a call.
Millennium Signatures had been in the Marking Products business for over 30 years and we have invested in several technologies allowing us to provide this range of product and services to our customers.
Millennium Signatures has an in-house Artwork Department that makes creating these stencils to your specific requirements easy. Provide us with a concept of what you need and one of our Graphic Designers will create a DRAFT for your review. Once any changes that may be needed are made and the artwork is signed off, the stencils go into production and are cut from the size, shape, thickness and material type you request. 
If you have any questions, please contact our Technical Sales Team at our Buffalo NY, USA or Burlington ON, Canada facilities.
Call: (905) 639-0909
E-mail: info@millenniumsignatures.com
Website: www.millenniumsigntaures.com

#MillenniumSignaturesMarkingSystems #MillenniumSignatures #MarkingSystems #ComputerControlledMarking #LowStressMarking #ProductTraceability #SystemIntegrators #PartMarking #PartMarkingServices #LaserTechnology #MarkingSpecialists #PartTraceability #ProductCodes #ProductIdentification #PermanentMarking #ProductionMarkingEquipment #TYKMAElectrox #CustomCutStencils #MetalStencils #Stencils #OilboardStencils #CustomInksandSolvents #MarkingInks

CUSTOM ENGRAVED STEEL STAMPS, DIES, INSERTS, HOLDERS, TOOLING and more…

Custom Steel Stamps

Turn to Millennium Signatures Marking Systems Inc., for all your Custom Engraved Steel Stamps, Dies, Inserts, Holders and Tooling.  Using a variety of technologies both new and old, Millennium Signatures has been producing and supplying Precision Cut and Hardened Stamps and Dies since 1972. We maintain a large assortment of Steel Insert Type (both Metric and Imperial) on the shelf ready to ship and pretty much everything else from Custom Type Holders to Hand Stamps and Dies are made custom to your exact specifications upon ordering. 

Millennium Signatures also supplies a range of Hydro-Pneumatic and Impact Style Presses which make for easy and cost effective method of providing basic identification on your parts.

For more information on these products and others in our extensive range of Marking Products and Services contact the Technical Sales Team at Millennium Signatures Marking Systems Inc. by phone at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

VISIT MILLENNIUM SIGNATURES MARKING SYSTEMS AT IMTS 2016 IN CHICAGO!

Millennium Signatures Technicians

Millennium Signatures will be at the IMTS Show at the McCormick Place facilities in Chicago this September 12th through 17th representing our Marksman Series Dot Peen Marking Products and our TYKMA Electrox Galvo Laser Marking Systems line.

If you are interested in seeing the latest products from either of these exciting lines, it’s encouraged that you contact our offices before the show and we will make sure to schedule a time to meet with you one-on-one to view the product(s) you’re interested in seeing and get you the answers you looking for.
Jeff Guenther along with Vjeko Luburic (Technical Sales) will be transversing between our two booths at the show and do not want to miss the opportunity to meet with you.

Millennium Signatures suppliers of:

  • Electro-Chemical Etching Equipment, Accessories & Supplies
  • Galvo Driven Laser Marking Systems & Automated Integrations
  • Air Vibro Engraving Pens
  • Industrial Marking Inks & Solvents
  • Computerized Dot Peen Markers
  • Custom Cut Stencils – All materials
  • Custom Part Marking Services
  • Custom Engraved Steel Stamps
  • Circumferential Marking Solutions
  • Linear & 2D Barcoding Systems
  • 2D and 3D Engraving
  • Pad Printing Services
  • Custom Rubber Stamps

Give us a call (905) 639-0909 or e-mail us at info@millenniumsignatures.com and let us know you plan to attend. We look forward to seeing you there.

 

WE INVITE YOU TO COME VISIT OUR FACILITY!

1550 Yorkton Court Facility

Unit #12 located at 1550 Yorkton Court – Burlington, Ontario CANADA L7P 5B7

Its been a year already since we moved into our NEW Burlington Facility at 1550 Yorkton Court. This is a great facility that gives adequate room for holding a larger inventory and providing in-house diagnostic & repair services.  We also have ample room for processing sample parts with any of our various Marking Technologies.  We also have a show room that gives you the ability see all of the actual equipment and view hundreds of samples from past projects to fully understand the scope of capabilities associated with each technology.
If you are looking to implement a new product identification process and you are able to visit our Burlington, Ontario facility we encourage you to give us a call and schedule a visit.  Many of our Custom Part Marking Services are also processed at this facility also.

Millennium Signatures Marking Systems Inc., specializes in helping the manufacturing industry obtain better identification on almost any product using one of the following products and/or processes:

  • Steel Stamps & Individual Character Inserts
  • Custom Engraved Steel Stamping Dies
  • Holders, Tooling & Fixturing
  • Stamping Presses
  • Custom Hand Stamps & ID Punches
  • Marking Inks (Industrial & Aerospace Grade)
  • Manual Electric Etching Systems
  • Manual Air Vibro Etching Pens
  • CNC Scribe (Scratch) Marking Technology
  • Computerized Dot Peen (CNC) Stamping Systems
  • Electro-Chemical Etching Equipment, Accessories & Supplies
  • VIN Etch Stencils for Acid Etching on Glass
  • Custom made Metal Signs & Nameplates
  • Custom Part Marking Services
  • Custom Cut Stencils in a variety of materials
  • Laser Marking Systems, Accessories & Services
  • On-site Laser System Training & Repair
  • Laser Sintering Services

For additional information or call our offices at (905) 639-0909 or e-mail info@millenniumsignatures.com to have a member of our technical team assist you with your product inquiry.