FREE PICK-UP & DELIVERY

Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:

  • Stoney Creek
  • Hamilton
  • Brantford
  • Ancaster
  • Dundas
  • Flamborough
  • Waterdown
  • Burlington
  • Oakville
  • Milton

Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers. 
Millennium Signatures can make it easy! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
#MarkingDevices
#MarkingSystems

 

IN-HOUSE GRAPHIC ARTWORK AND DESIGN SERVICES

Our core business is to provide manufacturer’s with quality Marking Equipment and Systems to look after all their Product Identification requirements. Second to that is our Part Marking Services component of the business where our highly knowledgeable techs use the many technologies we sell, service and support to mark batches of parts for the customer as a contract service. 
Beyond that we offer Anodizing, Heat Treat and Stress Relieving Services, Sandblasting of small components and Custom Made Positive Locating Jigs & Fixtures. 
Central to many of these services is our in-house Graphic Artwork Department headed up by Carolyn. We can assist you by
preparing custom artwork for Fabric Stencils used in Chemical Etching, Logo’s and Barcodes for use with lasers, QRCode Generation for Laser and Dot Peen Marking Technologies and much more. 
Carolyn and her team can help you with all of your Graphic Artwork Needs. 
Contact our Part Marking Specialists and inquire 
T: (905) 510-3361
E: info@millenniumsignatures.com
W: millenniumsignatures.com

EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

CUSTOM LASER SINTERED METAL NAMEPLATES

At Millennium Signatures Marking Systems Inc., we prepare Metal Nameplates and Signs to your exacts requirements. Various materials, various thickness, with holes and slots or without. Square corners or rounded corners, whatever you need. We have several processes including Aluminum Anodized Plates, Deep Etch & Fill on Steel & Aluminum, Engraved & Filled and our most popular process Custom Laser Sintered Metal Signs and Nameplates.
Our unique Laser Sintering Process uses a special formulation of granular ceramic materials baked into the cavity created while Laser Marking. This process is highly effective on Stainless Steel and Aluminum Plates and Products. 
The marking is approximately 0.004” in depth and the ceramic powder that is fused into the material provides a Beautiful even texture and great contrast! Laser Sintered Nameplates have been proven to meet the requirements of ASME Certified Shops and are far less expensive than the Deep Etch & Fill Process, especially when it comes to a variety of different variable data or low volumes. 
In addition to Custom Laser Sintered Nameplates, our Custom Part Marking Division also uses this process in some situations to custom mark our clients’ parts. It’s very pleasing to the eye. It’s very durable and most of all, it’s very versatile and cost-effective. 
Contact our Part Marking Specialists today about Laser Sintering or any of our Metal Sign and Nameplate Technologies. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or marksmanmarkingsystems.com

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

     

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

IDENTITY CRISIS?

Millennium Signatures at its roots was Chem-Etch and Stamp going back almost 50 years to 1972. In those early years, the company was a leader in Electro-Chemical Etching and Steel Stamp & Die Processes and still is today. In 1987 the company took on the Distribution, Integration and Servicing of Computerized Dot Peen Marking Technology which was completely NEW at that time. It was in 1990 that a separate division of the company was formed and “Canadian Laser Technologies” was created to focus on designing, building and integrating Galvo based Nd:YAG and CO2 Lasers. 
It was in 2003 that the company invested extensively in new facilities and new products and completely rebranded to become Millennium Signatures Marking Systems. A complete full-service solution for all your Part Marking and Product Identification needs. We have accumulated such an extensive client base that we expanded our focus even further and in 2006 we did a deep dive into the formulation of Custom Inks and Solvents (Printing Ink) to support Direct, Offset and Inkjet Marking System use. 
Today we have multiple facilities and deal with manufacturers from virtually every sector of the manufacturing world right around the globe. The bulk of our business is throughout North and South America but we do supply product throughout Europe and many Baltic Countries also. 
Today we still come across long time Etching Customers that did not know we supplied and supported Lasers, likewise some Laser customers were surprised to find we are also one of the leading sources of Computerized Dot Peen Marking Equipment and so on. So we are looking to set the record straight and let everyone know the extensive range of products & services that we provide. We stock everything needed for technical support services on everything we sell and have great technicians throughout North America to support our customers with after-sales technical support. 
Today at Millennium Signatures Marking Systems Inc., we specialize in all of the following products and maintain product on the shelf for quick availability. These Products and Services include:
Custom Engraved Steel Stamp & Die, Custom Tooling & Fixturing, Computerized Dot Peen Marking Systems in Bench Top, Portable and Compact Integrator Series Marker formats, Custom Formulated Industrial Inks & Solvents including Aerospace Marking Inks & Polyurethane Protective Top Coat Products. 
We also are highly specialized in Fibre and CO2 Galvo Driven Laser Marking Systems, Electro-Chemical Etching, Custom Cut Stencils, Laser Sintered Signs, Vibro Etch and Scribe Marking Technologies and we are a Manufacturer of Custom Steel & Aluminum Nameplates and high-quality Self-Adhesive Labels and Decals. Then, of course, is our very popular Custom Part Marking Services Division which you can read all about by searching #CustomPartMarking and #ContractMarking. We need to service companies with a multitude of complex requirements and we are not going to talk a customer out of a Dot Peen Marking System to sell a Laser as a Laser Company would and vice-versa. We will provide you with the solution that is right for you meeting your specifications and keeping you within your budget.

So to summarize, we are a complete Marking Systems & Services Solutions company and we are very proud of all we have accomplished over the years and thankful for the thousands of customers who choose to have us support their Product Identification processes.

If you have any questions about how we might be able to assist you, please contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsystems.com

#PartMarking #Engraving #DotPeenMarking #DotPeen #LaserMarking#Marksman #MillenniumSignatures #MarkingProducts #MarkingDevices#AutomatedMarking #CustomInks #CustomNameplates #ChemEtch
#PermanentMarking #MarkingMethods #MarkingSystems #PartIdentification#JeffGuenther
#VibroMarking #FibreLaser #ChemicalEtching #PartMarkingSpecialists#SteelStamp

WAIT!

We really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks

CUSTOM CUT STENCILS – All Materials

There are many different industries that use our CUSTOM CUT STENCILS for one application or another and Millennium Signatures is a Fast and Cost-Effective source for all your stencilling needs. At Millennium Signatures we have the technology to create Custom Cut Stencils from a wide range of materials including, but not limited to Stainless Steel, Brass, Aluminum, Copper, Plastic, Mylar and Oilboard, custom to your specifications.
These stencils could be used for marking everything from Highway Construction Barriers, Shipping Crates, Overhead Pipe, Entrances and Exits, Apple Crates, Aircraft Components etc. If you need having a stencil created for a Marking Application including even Chemical Etching or VIN Etch Stencils, give us a call.
Millennium Signatures had been in the Marking Products business for over 30 years and we have invested in several technologies allowing us to provide this range of product and services to our customers.
Millennium Signatures has an in-house Artwork Department that makes creating these stencils to your specific requirements easy. Provide us with a concept of what you need and one of our Graphic Designers will create a DRAFT for your review. Once any changes that may be needed are made and the artwork is signed off, the stencils go into production and are cut from the size, shape, thickness and material type you request. 
If you have any questions, please contact our Technical Sales Team at our Buffalo NY, USA or Burlington ON, Canada facilities.
Call: (905) 639-0909
E-mail: info@millenniumsignatures.com
Website: www.millenniumsigntaures.com

#MillenniumSignaturesMarkingSystems #MillenniumSignatures #MarkingSystems #ComputerControlledMarking #LowStressMarking #ProductTraceability #SystemIntegrators #PartMarking #PartMarkingServices #LaserTechnology #MarkingSpecialists #PartTraceability #ProductCodes #ProductIdentification #PermanentMarking #ProductionMarkingEquipment #TYKMAElectrox #CustomCutStencils #MetalStencils #Stencils #OilboardStencils #CustomInksandSolvents #MarkingInks

THE SAFE USE OF LASERS

ANSI Specification Z136.1

Millennium Signatures Marking Systems Inc., has specialized in providing Turn-Key Galvo Driven Laser Marking Technology, Systems and Services since 1990.
With extensive knowledge of the various configurations including the two (2) most common being a CDRH Class I designated system designs or a CDRH Class IV designated system designs, the Part Marking Specialists on staff at Millennium Signatures Marking Systems are happy to consult with you or your Safety committee on the various options to consider when buying a Laser Product and how to remain fully compliant with Safe Operating Recommendations when working with Lasers.
Probably the best publication to use when creating a Laser Safety Policy within your company would be the ANSI Z136.1 “The Safe Use of Lasers” publication as issued by The American National Laser Institute. For the past few decades, this has been the bible of people who design, build, and use Laser Products in North America and beyond.
Please feel free to contact our Technical Staff if we can assist you with getting a copy of the publication or answer any questions that your company may have.
We can be reached by phone at (905) 639-0909 or by e-mail at info@millenniumsignatures.com
Facilities located in Buffalo NY, USA and Burlington ON, Canada.

CUSTOM CUT STENCILS made from a variety of materials for wide range of applications!

Custom Cut Stencils
Custom Cut Stencils made from a variety of materials for a range of applications.

Regardless if you are marking pipe at an Oil Refinery or on a Submarine, Stenciling “Property of” on Concrete Dividers for Road Repair or giving clear instruction on where to step and where NOT to step on an Aircraft Housing, Millennium Signatures can create perfect Stencils to help you make your mark!
We cut Custom Stencils at our facilities for customers everyday. We can turn most projects big or small around the same day or next day. Metal Stencils can take a few days depending on specific requirements.

We commonly produce Stencils from the following materials:

  • Oil Board
  • Mylar
  • Acrylic
  • Copper
  • Brass
  • Aluminum
  • Cold Rolled Steel
  • Stainless Steel

We have a full service Artwork Department in-house to help you with your graphic requirements.

Contact the Technical Sales Team at Millennium Signatures Marking Systems Inc., today and tell us about your application.
T: (905) 639-0909
E: info@millenniumsignatures.com