Marksman Website

We have a Website dedicated entirely to our Marksman Line of Computerized Dot Peen Marking Equipment. It presents a great deal of information on all our models including our Bench Top Markers, Hand-Held Portable Markers and our Integrator Series Compact Marking Heads for Assembly Line and Automated Cell applications. 
This site is dedicated just to this one product line and will be a great help to those looking to purchase pin Marking technology as well as those looking for supporting documentation, specifications and dimensions etc. 
We are constantly expanding to accommodate the demand as Marksman has become very popular throughout the USA, Canada and Mexico. Customers report that the quality, capability and reliability for the money spent is exceptional. For more information on the Marksman Series Marking Systems or any Part Marking Technology, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
#PartMarking #MarkingProducts #Engraving #MarkingTechnology #Etching#DotPeen #PinScribing #PinMarking #MarkingMethods #MarkingSystems#MillenniumSignatures #PortableMarking #ImpactStamping #JeffGuenther#PermanentMarking #MarkingSystems #LowStressMarking #LaserMarking#ChemicalEtching #AcidEtching #ChemicalEtch #PaperStencils#MarkingInks

HELPFUL MARKING TIPS SERIES: Electro-Chemical Etching of Titanium

Electro-Chemical Etching of Titanium

“When chemically etching information on Titanium, less is often more…”

For the best Electro-Chemical Etch results on Titanium, use Millennium Signatures Electrolyte Formulation
X4R-416 at a Medium to High Power Setting in the DC Output Mode on most Power Units. A good Deep Etch Power Unit is ideal for optimal results. Getting a high contrast light surface mark on Titanium can be challenging, if your specs will accommodate, it’s actually easier to get a very sharp crisp marking by etching down a couple thousandths of an inch (0.002”) or 0.051mm which is easily achieved with a few very quick, light applications of the hand marker as not to generate too much heat. 
Give the surface a very quick light scuff with a Scotch Brito abrasive type pad and you should have a beautiful, razor sharp, high contrast etch which is often easily mistaken for a laser quality marking.

Remember:
Remember to keep your Monopad very damp with the X4R-416 Electrolyte Formulation, but not dripping all over your part and workstation. Too much heat can be the enemy when marking most metals, this is especially true when marking Titanium.
Use Standard Neutralizer or our Extra Strength X4R-900 Neutralizer to thoroughly clean the areas that came in contact with the electrolyte. 
Results may vary slightly when using different grades of Titanium, but these tips typically serve well on all Titanium Etching Applications. A good ground connection in close proximity to the area you’re marking is always important.

For more information on the best Electro-Chemical Etching Equipment, Accessories and Supplies for a given application, be sure to check our other HELPFUL MARKING TIPS SERIES Blogs and posts on Facebook, Instagram and LinkedIn as well as at our Website: www.millenniumsignatures.com
Contact our Part Marking Specialists at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

This Helpful Marking Tip was brought to you by Jeff Guenther of Millennium Signatures Marking Systems Inc.

#MillenniumMarkingTips #EtchingTitanium #MarkingTitanium#ChemEtchTitanium #X4R416 #Monopads #JeffGuenther#MarkingMethods #MarkingSystems #MarkingTechniques#MarkingProducts #MarkingEquipment #ChemicalEtching #AcidEtching#AerospaceMarking #Model9300StencilImprinter #HelpfulMarkingTips#MillenniumSignatures #PartMarkingSpecialists

CUSTOM PART MARKING SERVICES

Have you ever considered outsourcing your part marking? What if you could get you parts turned around very quickly and marked to specification by Part Marking Specialists using the corresponding process/technology with a fixed cost per part?
It’s completely possible and is part of the everyday activity at Millennium Signatures Marking Systems Inc.
We have hundreds of clients who sent in both simple and very challenging part marking requirements from all over North America who just want their parts done right, using the best technology and love our service.
We can process a couple parts or we can process thousands of parts. There is no job too big or too small. 
We can do Rotary Application work (Circumferential Marking) we can accommodate almost any material. We are very accustomed to working with Aerospace, Nuclear and Military Marking Specifications. Contact our Part Marking Specialists today via our general inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

S73XNW Aerospace Grade Marking Inks

S73XNW Aerospace Grade Marking Inks for the marking of Aerospace Components as per various Aircraft Component Part Marking Specifications. 
Millennium Signatures carries fresh batches of the S73XNW Series Marking Inks in stock. We carry these Inks in Black, White and Red and other colours are available but need to be formulated upon request.
These Marking Inks are sold in 16oz containers. 
The corresponding solvent used for thinning the ink and clean-up applications is called S73XNW and it’s also maintained in stock and sold separately in 16oz containers. 

Maintained in stock at both our Buffalo NY, USA and Burlington ON, Canada locations. Datasheets and certifications available upon request.
Custom made RUBBER STAMPS and dry ink pads are also available to suit.

Contact our Part Marking Specialists by phone on our main inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

#S73XNW #MarkingProducts #MarkingSystems #MarkingMethods #PermanentMarking #CustomMarkingInks #AerospacePartMarking #AerospacePartIdentification #Engraving #Marking #PartMarking #Etching #TYKMAElectrox #ChemicalEtching #DotPeenMarking
#RubberStamps #CustomSteelStamps

Nothing Beats Experience!

Sometimes having the right equipment alone is not always a complete solution, especially when it comes to manufacturing Custom Parts. Nothing replaces experience. At Millennium Signatures Marking Systems, we sell Marking Equipment to help you, the manufacturer, properly and cost-effectively mark your parts. The equipment is very good quality and we are proud of the specific range of products that we bring to the marketplace going back as far as 1972. However, for some smaller businesses the cost of the equipment and the volume of parts they require the Marking process for make justification difficult.If you find yourself in a similar situation and you don’t have the time or the personnel to work through the learning curve of New equipment, talk to us about our Custom Part Marking Services.
Our highly experienced team has years and years of experience working with custom components of all shapes, sizes, materials and coatings and the processing such parts with every technology we sell, service and support. Do you manufacture a good product? Make sure you add the finishing touch to your product by making sure the branding and/ or traceability is clean, clear and professional looking.
If you feel our Part Marking Specialists could help you, give us a call.
Fast efficient turn-around times.
In-House Artwork Department.
45 Years of experience.

Tel: (905) 639-0909
E-mail: info@millenniumsignatures.com

Marksman – by Millennium Signatures

We have a NEW website up and operational. It’s in its very final stages of having some of the data on some of the systems populated, but it can be viewed. This site is product specific to the Marksman Series Computerized Dot Peen Marking Technology, by Millennium Signatures Marking Systems Inc.

Find us at marksmanmarkingsystems.com or search for us under “Marksman – by Millennium Signatures”. For a complete range of other Marking Systems and Services, be sure to visit www.millenniumsignatures.com our full product site.

This site is meant to offer much more detail on the capabilities of the Bench Top, Portable, and Integrator Series (Universal Mount) Compact Marking Heads offered by Millennium Signatures Marking Systems Inc.

Watch for us at Fabtech in Chicago / Atlanta, CMTS in Toronto, Eastec in Springfield Mass and Plant Maintenance & Design Show in Montreal. We are active in the trade show circuit and very active on Social Media, specifically, Facebook, LinkedIn, Instagram, Twitter, and more.

Helping you mark your products is what we do! Contact the Part Marking Specialists at Millennium Signatures by phone at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

The NEED FOR SPEED!

Check out our ad in this months issue of Fabricating and Metal Working. We are promoting our Marksman Line of Computerized Dot Peen Marking Systems ahead of the FABTECH show coming up in November 2017.

Marksman by Millennium Signatures is a very comprehensive line of Pin Marking (Low-Stress Computerized Stamping) Equipment that is available in several formats including Bench Top, Hand-Held Portables, and our Compact (Universal Mount) Integrator Series Marking Heads. We have beautifully designed systems for Circumferential Marking applications. We have Corless (Battery Powered) Hand-Held Portables which make permanently identifying heavy components and/or large fabrications easier than ever!

With facilities in Burlington ON, Canada, and Buffalo NY, USA both fully stocked with all models and all replacement parts to support future after sales service and support requirements.

Give our Part Marking Specialists a call at (905) 639-0909 or inquire with us via e-mail at info@millenniumsignatures.com

State-of-the-art laser equipment: GALVO DRIVEN LASER MARKING SYSTEMS

Millennium Signatures is pleased to announce that we are now equipped with even more state-of-the-art laser equipment allowing us to demonstrate the capabilities of our Galvo Driven Laser Marking Systems to those visiting our facility. Our Canadian Facility located in Burlington, Ontario is now equipped with a 20-Watt Minilase Manual Bench Top System (Class I Configuration), a 20-Watt Scorpion Rapide II ZEP Multi-waveform Z-Mode Laser (Class IV Configuration) and most recently the 50-Watt Scorpion Laser (Class IV Configuration). We have acquired this laser complete with a 160mm, 254mm and 350mm multi-element Flat Field Lens Assemblies to be able to demonstrate a wider range of capabilities and enhance the range of our Application Testing Services. The 50-Watt Laser will be capable of delivering the same ultra high quality marking we are known for with shorter cycle times and deeper marking results if required. Millennium Signatures is always investing in NEW equipment and the capability to service our clients with better efficiency.

To arrange a visit to see demonstrations of any of our Marking Technologies demonstrated, please be sure to contact our Technical Sales Team at
T: (905) 639-0909
E: info@millenniumsignatures.com

CUSTOM PART MARKING SERVICES by Millennium Signatures Marking Systems Inc.

Custom Part Marking Services
Millennium Signatures provides great precision and a fast turn-around with their Custom Part Marking Service

WE CAN MARK YOUR PARTS FOR YOU!

Millennium Signatures Marking Systems Inc., with facilities in Buffalo, NY and Burlington, ON in Canada has over 55 Years of experience in the field of Part Marking (Part Identification and Traceability). In many cases our clients do not have the volume initially or the time to mark their products cost effectively in-house. Many of our clients elect to send batches of parts to our facilities and have us process their parts for them. In most cases we can turn batches of parts around over night and are well affiliated with various Marking Specifications associated with the various industries and can provide results tailored to whatever is requested. Variable Data Applications, Linear & 2D Barcoding requirements, Circumferential Marking…. NO PROBLEM!

In some cases it is only temporary until their volumes increase or they become completely comfortable with one of our many technologies we offer and then they purchase the equipment from us. There are many benefits to doing this, such as it allows experts to process your parts to the required specification. It allows you to get feedback and approval from within your industry before making an expensive purchase. It allows us to do prepare all the artwork, programming layout files, fixturing and such to provide perfect marking every time and when you do make a purchase all of these items accompany your system so that you are instantly in production with perfect looking parts every time!

Visit our website at www.millenniumsignatures.com or contact our Technical Sales Team by phone at (905) 639-0909 or e-mail at info@millenniumsignatures.com

Have us mark some parts for you and buy with COMPLETE confidence!

PART MARKING SPECIALISTS – Bring your challenging marking applications to us! SYSTEM SALES and PART MARKING SERVICES Available

Challenging Part Marking Applications
Incredible Service / Fast Turn-around. Bring us your challenging Part Marking Applications!

CHALLENGING MARKING APPLICATION?

When you are faced with having to track a part and you need to get all the necessary information on the part, in the right location and have it clearly readable even after exposure to harsh environmental conditions and potentially many years into the future, Millennium Signatures Marking Systems are the specialists to consult.

With over 55 years experience in the Part Marking and Product Identification business, Millennium Signatures has a highly skilled team of Application Technicians who can take your part and learn your requirements and quickly recommend the best technology to use to accomplish this goal!

We have a very advanced Applications Lab equipped with everything from Hand-Held Air Vibro Etching Pens, Electro-Chemical Etching, Pad Printing, Scratch Marking Devices, TYKMA Electrox Galvo Driven Laser Marking Technology and our Marksman Series Computerized Dot Peen Marking Systems among others, which will allow us to confirm the results on your parts and offer live demonstrations of the solutions we offer.

Millennium Signatures holds a large inventory of Equipment, Accessories and Supplies in stock at both our Burlington, Ontario Canada and Buffalo, New York USA facilities so that in most cases we can get you what you need very quickly!

Contact our Technical Sales Team today for more information on the dynamic range of products and services Millennium Signatures can assist your operation with today!

Reach us at:
T: (905) 639-0909
E: info@millenniumsignatures.com

#PinStamping #ComputerizedDotPeen #Engraving #LaserMarking #VibroEtching #2DBarCodes #Barcoding #MillenniumSignatures #ApplicationsLab