TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

ENGRAVING SERVICES

Allow Millennium Signatures Marking Systems Inc., to assist you with your engraving needs. Millennium Signatures sells the Marking Equipment to end-users as well as assisting clients with various Marking Processes through our Custom Part Marking Services facility. We are equipped with many different technologies including Mechanical, Computerized Rotary Cut and Laser Engraving Technologies. We also have Galvo Driven Fibre and CO2 and Flatbed Flying Optic Technologies with Rotary Axis for doing Cylindrical or Circumferential Marking of Cylinders and other round products. We have a large array of the best equipment in the industry and expert operators and technicians in-house supported by a Graphic Design Department to ensure the highest quality output. We take in and process jobs daily Monday through Friday every week turning out the best results at great prices and with impressively fast turn-around times.
Call our Part Marking Specialists Toll Free at (833) 219-1212 or using our local at (905) 639-0909
You’re always welcome to send inquiries in via e-mail at info@millenniumsignatures.com

JEFF GUENTHER – 30 YEARS SPECIALIZING IN PART MARKING SYSTEMS & SERVICES!



It was 30 years ago, on the morning of August 6th, 1989 that I started working alongside my grandfather in a machine shop. I was not even finished school yet but worked every day even around a class schedule. From that day forward, I prepared blanks and related tooling for Custom Engraved Steel Stamping Dies and other accessories to support various Marking Solutions all intended to make it easier and more efficient for manufacturers to identify their parts professionally and permanently. These technologies have allowed them to build brand recognition and take responsibilities for the quality of their products through barcoding, lot numbering, serialization and other forms of traceability in virtually all industries from Aerospace to Nuclear, Medical-Surgical, Steel Industry, Machine & Tool, Plastics Processing and so much more. 
I have continued to focus my energies in this very same direction every day since. Today, 30 Years later my company Millennium Signatures Marking Systems Inc., continues to provide even the most hi-tech manufacturing companies of today with the latest Marking capabilities and provide integration services. We have also created a very unique “Custom Part Marking Services” division that allows some clients with highly specialized requirements or smaller volumes to draw upon those 30 years of experience and our dynamic range of processes by bringing their parts to us for processing. We have built a procedure that allows us to assess the application, prepare any artwork, necessary fixturing, material handling etc., and mark the customers’ parts to their exact specifications following a fast and efficient “First Article Inspection Process”. We can now mark most customers parts to their complete satisfaction using any one of several technologies cost-effectively and efficiently typically returned next day or in some cases 1-2 day turn-around depending on volumes and the particulars. 
A unique blend of in-house manufacturing and exclusive distribution of some of the very best marking equipment has allowed Millennium Signatures to fill out and offer a dynamic range of high-quality solutions including Galvo Driven Fibre Laser Marking Technology, Computerized Dot Peen Indent Marking & Scribing from our Marksman Series Products and many of our tried & true processes that date back even long before my time such as Electro-Chemical Etching and Custom Engraved Stamping Dies and Inserts etc., plus many more. 
We have come to learn that a large inventory in our business is very important. When manufacturers go off-line with their Part Marking for whatever the reason, they need quality solutions available fast and Millennium Signatures Marking Systems has invested a great deal of time and money into making that possible for our continuously growing list of clients.

For more information on Millennium Signatures Marking Systems Inc., you’re welcome to contact one of our Part Marking Specialists Toll Free at 1-(833)-219-1212 or e-mail the team at info@millenniumsignatures.com
T: (905) 639-0909
W: millenniumsignatures.com
W: marksmanmarkingsystems.com

#JeffGuenther #LaserMarking #Engraving #PartMarkingSpecialists#MillenniumSignatures #FibreLaserTechnology #MarkingProducts#MarkingMethods #PermanentMarking #MarkingSolutions #MarkingExperts#LaserSintering #ChemicalEtching #DotPeenMarking #Marksman

MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

TRACKING YOUR RAW MATERIALS

Tracking your raw materials as they come through the door and all the way through the manufacturing process has never been easier!

The Marksman Series MKP-054 Hand-Held, Bluetooth, Battery Operated Portable Marker by Millennium Signatures is available as what we call “Portable/Benchtop Combination Systems”. It allows all the fantastic features of the Portable System but also slides effortlessly into a positive locating fixture on our T-300 Precision Z-Axis Tool Post which allows hands-free operation of smaller components and Nameplates in a traditional Bench Top Format.

BOTH our MKP-054 and the larger format, pneumatic model known as the MK-100N/1340G can be offered in a Combination System Format.

OPTION A
The MKP-054 is a Battery Powered Blue Tooth System that offers a Marking Field of 70 mm x 35 mm or
2.75” x 1.37”

OPTION B
The MK-054 Pneumatic offers is a Pneumatic Solenoid Driven Model that includes an umbilical that delivers, power, data and compressed air. This offers a Marking Field of 50 mm x 40 mm 
or 1.96” x 1.57”.

OPTION C
The Large Format MK-100N/1340G System is also equipped with an umbilical that delivers Power, Data and Compressed Air to the Marking Head which offers a Larger Marking Field of 120 mm x 38 mm or 4.72” x 1.49”

OPTION D
The MKP-054 Battery Operated Portable is now available with a keyboard integrated into the Marking Head. It still offers Bluetooth and communicates with our IOS and Android Based Apps for your Smart Phones and Tablets, but also allows easy editing variable data right there on the device, quick and easy!

As mentioned, all of these Portable Models are available in the Combination System Format.

For more information on these and other Marking Technologies, contact the Technical Sales Team at Millennium Signatures Marking Systems Inc. We are the Part Marking Specialists for today’s industry. 
T: (905) 639-0909
E: info@millenniumsignatures.com 
W: marksmanmarkingsystems.com

#PortableMarking
#Engraving #PermanentMarking
#ComputerizedStamping #Traceability #MaterialTracking#ProductIdentification #MarkingSystems #MarkingProducts #IndentMarking #IndentStamping #LowStressMarking
#Marksman #MillenniumSignatures #JeffGuenther

NEW!


Marksman by Millennium Signatures Marking Systems Inc. continues to offer versatility and choice with a dynamic range of equipment. Our MKP-054 Portable Blue Tooth Hand-Held Battery Powered Marking Systems have been a huge success for years, now we’ve integrated a keyboard into the Hand-Held Unit allowing quick editing to be done right there on the unit regardless where you are. You can be up on a large fabricated structure or across the shop floor. 
Our systems have always used Bluetooth Technology to transfer static and variable information to the marking seamlessly from a Laptop Computer, Cell Phone or Tablet using our free App designed for Android or IOS Operating Systems, but now you have the choice to purchase this same equipment with the addition of a built-in keyboard. Marksman remains committed to supplying well built Marking Equipment designed to handle challenging manufacturing environments. 
For more information on this Computerized Part Marking Technology, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

FREE PICK-UP & DELIVERY

Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:

  • Stoney Creek
  • Hamilton
  • Brantford
  • Ancaster
  • Dundas
  • Flamborough
  • Waterdown
  • Burlington
  • Oakville
  • Milton

Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers. 
Millennium Signatures can make it easy! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
#MarkingDevices
#MarkingSystems

 

CONTRACT MARKING SERVICES

Our team goes to great effort to review our customer’s instructions in great detail and always get a First Article Photo approved before processing to give our customers EXACTLY what they want on their parts. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems if you are looking to purchase Marking Technology for your shop or need to have parts processed for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

MARKING Done Right ✅

MARKING done right  can really enhance the overall perception of your product once in your client’s hands. Contact the Part Marking Specialists at Millennium Signatures Marking Systems for information on acquiring the right equipment for your application or how to utilize our Custom Part Marking Services and have us mark your parts for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com