DID YOU KNOW…

Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

BALL SCREW vs PRECISION REINFORCED COG BELT Driven Dot Peen Marking Systems

Millennium Signatures “Marksman Series” Computerized Dot Peen Marking Systems is a comprehensive collection of equipment models, all offering their own unique features and abilities. 
Among their many differences, they can be quite easily divided simply into two (2) groups just by the drive technology they are equipped with. 
We have the Precision Reinforced Cog Belt Driven models and the slightly higher-end Ball Screw Driven models. While it’s true the Ball Screw Technology does have some advantages over the Reinforced Cog Belt Driven models, don’t fall into the thinking that the Reinforced Cog Belt Driven Systems are inferior or not worthy for those of you who believe strongly in buying a good product and doing things right the first time!
It is true that Ball Screw is a little more precise and does have better registration, repeatability long term, but the reality is they really only show an advantage in some situations. For example, if you are doing Machine-Readable Codes all the time on a regular production basis and your markings are not only required to be clean, sharp and precise to the naked eye, but also to today’s world of high definition scanning technology, then yes there would be an advantage to going to a Ball Screw Design for the very best possible code generation. Ball Screw is also beneficial when it comes to longer distances as in the X or Y-Axis travel of your Marking Head. Our Model MH-250 Marking Head which features a larger marking area of 250mm (9,84”) x 250mm (9.84”) is an example of where we use the Ball Screw Drive mechanism because it allows for us to maintain a tighter tolerance over a greater span. If we build custom Marking Heads for a customer that cover an even larger span, naturally we would continue to stay with the Ball Screw Drive. 
Ball Screw is also a little longer lasting, so should your machine be running around the clock or performing a very high number of cycles every hour ongoing then this might be a reason to invest in the slightly more expensive Ball Screw Driven Technology. Ball Screw Systems also yield some additional benefit when marking really small characters. The extra precision of these units will start to show when marking characters under 2.0mm in height with one of our precision marking tips such as the PH-16 or the LP-06. 
However, eight or nine of every ten Computerized Dot Peen Marking Systems sold are based on the Precision Reinforced Cog Belt Driven Technology and it is not to be underestimated. It is remarkable the character generation and repeatability these systems provide, year after year. They are also highly proficient at Barcodes such as 2D Matrix, UID and QR codes, it’s only recommended to upgrade if these markings are very high in volume. 
When demonstrating these systems, most clients will not even ask to see the Ball Screw Driven models as they feel it is not at all necessary. The marking is extremely clean and the codes read perfectly. The feedback we get from clients that have owned these systems for years, consistently indicates that they continue to perform like new. There is no noticeable deterioration and they are very happy with the reliable, maintenance-free experience they have had.
We have a lot of great Marking Systems for you to see. Regardless which Drive Design you feel is right for you, Marksman Systems are extremely well designed, easy to use and very well priced. 
Contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#MarkingSystemsCanada #MarkingSystemsUSA #MarkingTechnologies#EngravingSystems #EtchingSystems #LaserMarking #PartMarkingCanada#PartMarkingNorthAmerica #DotPeenMarking #AerospaceMarking#MarkingProducts #MarkingMethods #BallScrewMarkers #BeltDrivenModels#Marksman #MarksmanMarkingSystems 
#MillenniumSignatures #MilSigMarking

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

PARAMETER TESTING

When you purchase a TYKMA Electrox Built Laser Marking System we can provide you with a Parameter Testing Grid Program which will allow you to execute this marking program on a piece of the material you intend to work with. It will quickly guide you to the best Speed, Power and Frequency settings to get the desired level of contrast and clarity for your markings. 
An excellent tool for those new to using Galvo Driven Laser Technology. The technology is just amazing and it will likely surpass all your Part Marking / Product Traceability expectations. This little aid just makes your initial set-up that much faster and more accurate. 
Contact our Part Marking Specialists about this little (no charge) option. 
We can be reached Monday thru Friday from 8:30am to 4:30pm Eastern Standard Time. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

MARKING Done Right ✅

MARKING done right  can really enhance the overall perception of your product once in your client’s hands. Contact the Part Marking Specialists at Millennium Signatures Marking Systems for information on acquiring the right equipment for your application or how to utilize our Custom Part Marking Services and have us mark your parts for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

CUSTOM PART MARKING

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about Custom Part Marking Services also commonly referred to as “Contract Marking”. Since 1990 we have been selling, servicing and supporting Galvo Driven Fibre and CO2 Laser Marking Systems. 
Part marking services performed same day / next day in most cases. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and marksmanmarkingsystems.com

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

     

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

Galvo Driven Fibre Laser Marking Equipment for the Lowest Price its EVER Been!

The opportunity to buy really good Galvo Driven Fibre Laser Marking Equipment for the lowest price its ever been is now! The NEW Laser Gear Series presents an opportunity that for many, was far less attainable just a year ago.
The Laser Gear Series is a seamless new Benchtop Marking Solution that uses high-grade components and is carefully packaged to offer so much more than ever before.
At nearly half the price of similar systems, the Laser Gear Series has been developed specifically to give small business or lower volume users a very high precision piece of marking equipment with all the versatility needed for so many different marking applications. You truly get to pay less without compromising on quality, capability, or support. Millennium Signatures Marking Systems is very proud to be able to provide this product. Available in Class I and Class IV configurations in either 20-Watt or 60-Watt power output. Theses Fibre Lasers will definitely Impress!
Contact our Part Marking Specialists for more information on this exciting new series of Fibre Marking Lasers.

We can Handle your Delicate Parts!

Even parts that need to be handled very delicately to avoid scratching or other forms of damage can be processed reliably by Millennium Signatures Custom Part Marking Division. Our operators are highly experienced and trained to follow customer instruction properly, unpacking and repacking parts such that they are ready to put in your customers hands. 
Special non-slip gloves are used to handle parts and protect the operators. Parts are unpackaged on special tables which protect sensitive surfaces and prevent parts from being dropped or accidentally knocked onto the floor. 
Fixtures and nesting apparatus are often made of Nylon or covered with Felt to protect the parts. We do all that we can to protect your parts and take the processing of your parts very seriously. Send your parts to our facility for marking and check one more thing off that bottomless to do list. 
Contact our Part Marking Specialists to learn more about how best to proceed. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millenniumsignatures.com

IDENTITY CRISIS?

Millennium Signatures at its roots was Chem-Etch and Stamp going back almost 50 years to 1972. In those early years, the company was a leader in Electro-Chemical Etching and Steel Stamp & Die Processes and still is today. In 1987 the company took on the Distribution, Integration and Servicing of Computerized Dot Peen Marking Technology which was completely NEW at that time. It was in 1990 that a separate division of the company was formed and “Canadian Laser Technologies” was created to focus on designing, building and integrating Galvo based Nd:YAG and CO2 Lasers. 
It was in 2003 that the company invested extensively in new facilities and new products and completely rebranded to become Millennium Signatures Marking Systems. A complete full-service solution for all your Part Marking and Product Identification needs. We have accumulated such an extensive client base that we expanded our focus even further and in 2006 we did a deep dive into the formulation of Custom Inks and Solvents (Printing Ink) to support Direct, Offset and Inkjet Marking System use. 
Today we have multiple facilities and deal with manufacturers from virtually every sector of the manufacturing world right around the globe. The bulk of our business is throughout North and South America but we do supply product throughout Europe and many Baltic Countries also. 
Today we still come across long time Etching Customers that did not know we supplied and supported Lasers, likewise some Laser customers were surprised to find we are also one of the leading sources of Computerized Dot Peen Marking Equipment and so on. So we are looking to set the record straight and let everyone know the extensive range of products & services that we provide. We stock everything needed for technical support services on everything we sell and have great technicians throughout North America to support our customers with after-sales technical support. 
Today at Millennium Signatures Marking Systems Inc., we specialize in all of the following products and maintain product on the shelf for quick availability. These Products and Services include:
Custom Engraved Steel Stamp & Die, Custom Tooling & Fixturing, Computerized Dot Peen Marking Systems in Bench Top, Portable and Compact Integrator Series Marker formats, Custom Formulated Industrial Inks & Solvents including Aerospace Marking Inks & Polyurethane Protective Top Coat Products. 
We also are highly specialized in Fibre and CO2 Galvo Driven Laser Marking Systems, Electro-Chemical Etching, Custom Cut Stencils, Laser Sintered Signs, Vibro Etch and Scribe Marking Technologies and we are a Manufacturer of Custom Steel & Aluminum Nameplates and high-quality Self-Adhesive Labels and Decals. Then, of course, is our very popular Custom Part Marking Services Division which you can read all about by searching #CustomPartMarking and #ContractMarking. We need to service companies with a multitude of complex requirements and we are not going to talk a customer out of a Dot Peen Marking System to sell a Laser as a Laser Company would and vice-versa. We will provide you with the solution that is right for you meeting your specifications and keeping you within your budget.

So to summarize, we are a complete Marking Systems & Services Solutions company and we are very proud of all we have accomplished over the years and thankful for the thousands of customers who choose to have us support their Product Identification processes.

If you have any questions about how we might be able to assist you, please contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsystems.com

#PartMarking #Engraving #DotPeenMarking #DotPeen #LaserMarking#Marksman #MillenniumSignatures #MarkingProducts #MarkingDevices#AutomatedMarking #CustomInks #CustomNameplates #ChemEtch
#PermanentMarking #MarkingMethods #MarkingSystems #PartIdentification#JeffGuenther
#VibroMarking #FibreLaser #ChemicalEtching #PartMarkingSpecialists#SteelStamp