TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

TWO (2) WEBSITES

That’s right! Millennium Signatures Marking Systems actually has two (2) Websites to help you find and learn about the Marking Processes that meet your product identification requirements. One is our main site which is an overview of all of our Marking Products and Services, this can be found at
millenniumsignatures.com. The other is designed specifically to provide content for our Marksman Series Dot Peen Marking Systems and Accessories etc.
This can be found at marksmanmarkingsystems.com

Our Marksman Series Dot Peen Markers are very popular and we hold a huge inventory of new systems, replacement parts and accessories as a result! We will have what you need readily available when you need it!
Check out our websites and contact the Part Marking Specialists at Millennium Signatures Marking Systems by calling (833) 219-1212 toll-free from anywhere within North America or by using our local number (905) 639-0909 as required.
We can also be reached by e-mail at info@millenniumsignatures.com

#Marksman #ComputerizedStamping
#EngravingSystems
#MarkingSystems
#MillenniumSignatures
#PermanentMarking
#LowStressMarking
#EngravingServices
#MarkingMethods
#DotPeenMarking
#ContractMarkingServices

MKP-054K PORTABLE MARKING

WESTEC 2019
We are at the Westec 2019 Trade Exhibition in beautiful Long Beach California with our Marksman Series Dot Peen Marking Systems
One of the newer items being presented at this show is our MKP-054K Battery Operated Hand-Held Portable Marker complete with built-in Keyboard, Bluetooth communications with a PC or any mobile device using our Free Apps designed for use with IOS and Android-based products.
These systems are durable, lightweight, easy to work with.
Contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Toll Free: 1-(833) 219-1212
Local: (905) 639-0909

LONG LIFE FABRIC STENCILS

What are Long Life Fabric Stencils?

They can be used in the process of Electro-Chemical Etching, a process used to permanently etch any combination of text, symbols, barcodes and graphics onto conductive materials such as most Metals & Alloys commonly used in manufacturing. 
These Stencils are made using a photographic process which is important because you can get the same sharp crisp imaging as your Camera Ready artwork to etch permanently, (often with very high contrast) right into your material. All done in just a few seconds and without introducing any stress into the parts. This makes your parts not only traceable and/or potentially well branded with your companies information, but it makes your parts look great!
Don’t forget this process is highly effective regardless of how hard the metals might be!
These Long Life Stencils are most popular for surface etching because they can be reused hundreds of times (per impression) if cared for properly. They are durable and very easy to use.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn more about how we can quickly get custom Stencils made up to suit your exact needs. 
Contact us at:
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#LongLifeStencils #EtchingStencils #PhotoStencils #DuraFabStencils#SurfaceEtching #EtchingSupplies #ChemicalEtching #AcidEtching#ElectrolyticMarking #MarkingProducts #MarkingSystems#PermanentEtching #KnifeMaking #LowStressMarking#MillenniumSignatures #MarkingMethods

TRACKING YOUR RAW MATERIALS

Tracking your raw materials as they come through the door and all the way through the manufacturing process has never been easier!

The Marksman Series MKP-054 Hand-Held, Bluetooth, Battery Operated Portable Marker by Millennium Signatures is available as what we call “Portable/Benchtop Combination Systems”. It allows all the fantastic features of the Portable System but also slides effortlessly into a positive locating fixture on our T-300 Precision Z-Axis Tool Post which allows hands-free operation of smaller components and Nameplates in a traditional Bench Top Format.

BOTH our MKP-054 and the larger format, pneumatic model known as the MK-100N/1340G can be offered in a Combination System Format.

OPTION A
The MKP-054 is a Battery Powered Blue Tooth System that offers a Marking Field of 70 mm x 35 mm or
2.75” x 1.37”

OPTION B
The MK-054 Pneumatic offers is a Pneumatic Solenoid Driven Model that includes an umbilical that delivers, power, data and compressed air. This offers a Marking Field of 50 mm x 40 mm 
or 1.96” x 1.57”.

OPTION C
The Large Format MK-100N/1340G System is also equipped with an umbilical that delivers Power, Data and Compressed Air to the Marking Head which offers a Larger Marking Field of 120 mm x 38 mm or 4.72” x 1.49”

OPTION D
The MKP-054 Battery Operated Portable is now available with a keyboard integrated into the Marking Head. It still offers Bluetooth and communicates with our IOS and Android Based Apps for your Smart Phones and Tablets, but also allows easy editing variable data right there on the device, quick and easy!

As mentioned, all of these Portable Models are available in the Combination System Format.

For more information on these and other Marking Technologies, contact the Technical Sales Team at Millennium Signatures Marking Systems Inc. We are the Part Marking Specialists for today’s industry. 
T: (905) 639-0909
E: info@millenniumsignatures.com 
W: marksmanmarkingsystems.com

#PortableMarking
#Engraving #PermanentMarking
#ComputerizedStamping #Traceability #MaterialTracking#ProductIdentification #MarkingSystems #MarkingProducts #IndentMarking #IndentStamping #LowStressMarking
#Marksman #MillenniumSignatures #JeffGuenther

EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

     

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

New Benchtop Marking System!

We have a very exciting NEW Bench Top Marking System to tell you about. 
It’s called the MK-250/200BN complete with a Heavy Duty Rotary Axis on our unique CDC-20 Positive Alignment Slide.
This system is not entirely NEW as much as it is a seamless blend of other popular Marksman Series Marking Systems. Here are the Four (4) features that make it unique and more versatile than anything else you will find on the market.

1 > This system uses our latest and most compact Controller which is packed with features such as Ethernet, USB, Read/Write SD Card and RS-232 connectivity. This very compact controller comes with an ergonomic Mount +Tray to support the Mini-Keyboard.

2 > This system also incorporated our MH-250 High-Performance Ball Screw Driven Marking Head, which boasts a generous 250mm x 250mm marking area. This is ideal for large parts, multiple parts and excellent for Large Nameplate Marking applications. You can never go wrong with the speed and precision of a Ball Screw Driven Marking Head and the Extra Large Marking Field comes in handy more often than you realize.

3> This extra large Marking Head has been Integrated with our CDC-20 Positive Alignment Slide which is also equipped with a Rotary Axis. The CDC-20 has been modified to allow for the larger parts (or tray of multiple parts) to be supported under the Marking Head. The Positive Alignment Slide Feature allows you to slide your flat part marking applications out of the way bringing in the Rotary Axis with adjustable Tail Stock all the while maintaining perfect alignment for Circumferential Marking of Cylinders. Having this feature allows you to switch out from conventional static Flat Part marking to Rotary Marking and back again if needed in seconds.

4> The last of the major features of this unique new system configuration is the addition of our extra heavy duty Rotary Axis with large 3-Jaw Chuck. It’s much larger and has more torque and accuracy than other systems you’ll find on the market. Without any customization, the Rotary Axis will mark parts up to 6.0” in diameter and part weight in excess of 35lbs. With modification, if needed, we can easily exceed these bits the system will be considered custom and built to suit. This may result in 3-4 lead time. 
I promise you that if you’re looking for a Premium System with the versatility to take whatever part marking requirements come your way, this NEW system configuration will impress. 
It was so impressive upon our first system build, that we immediately built up more for inventory, this system is proving to be very popular because there is nothing close to it being offered anywhere else.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about our Marksman MK-200BN/250 c/w CDC-20 Rotary Axis. You can reach us Monday thru Friday from 8:30am to 4:30 Eastern Standard Time. 
T: (905) 639-0909
E: info@milleniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#LargeFieldMarking #DotPeenMarking #ComputerizedStamping#LowStressMarking
#Engraving #MarkingSystems #Marksman #PinMarkingSystems#MarkingTechnology #MarkingMethods #MarkingProducts #MarkingDevices 
#PermanrntMarking #DeepMarking
#NameplateMarkers #BallScrewDriven #JeffGuenther#MillenniumSignatures

PREMIUM MOBILE MARKING PKG.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about our Signature Series MKP-054 Hand-Held Battery Powered Bluetooth Portable Marking System complete with our T-300 Base & Column. Also includes our MKP-054 Quick Release Mount allowing you to use your Hand-Held as a BenchTop Marker, ideal for smaller components. 
This system is also available with our High Visibility RED Mobile Marking Cart. This cart is equipped with two (2) Sturdy Shelves and one key lockable storage locker. The Mobile Cart is also equipped with an Electrical Power Bar and 20’ of extension plus a Mounted Air Filter & Regulator if used with our Pneumatic Series Systems 
There are a number of reasons why this is the best-designed system in the industry and it sells a price point that will surprise you. 
Contact our Technical Sales Office today for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com or millenniumsignatures.com