At Millennium Signatures Marking Systems we have a 3,000 square foot facility in Burlington, Ontario where we can perform even the most complex repairs to any of the products we sell. We have well-trained Technicians and all the Tools, Instruments and huge inventory of Replacement Parts on-hand in case they’re needed to help you get your Computerized Dot Peen Marking System, Galvo Driven Laser Marking Equipment or Electro-Chemical Etching Machines and so much more back up and operational quickly.
Despite selling some of the most reliable, hardworking equipment the industry has to offer, we often service requests to have old equipment overhauled as a means to support newer equipment as a back-up or pretty much any scenario leaving your company in need of Marking Equipment repairs.
We also service TYKMA Electrox Laser Systems and all Marksman Computerized Dot Peen Marking Systems.
For more information, contact one of our Part Marking Specialists at Millennium Signatures Marking Systems today by calling Toll Free
1-(833)-219-1212 or use our local at (905) 639-0909
You can also e-mail us at
Millennium Signatures is 100% focused on how to get the best marking possible on your parts. The world of identification is so powerful today and we can help you use the latest in Marking and Coding technology to meet all your customer requirements and promote and market your products better!
Millennium Signatures Marking Systems Inc. knows how to meet various specifications and routinely works with the Food, Drug and Pharmaceutical Industry, The Aerospace Industry, The Oil & Gas Producing Industries, The Nuclear & Power Generation Industry, The Automotive Industry and The Steel Industry among others. As a complete Product Identification & Traceability Company, we manufacture and/or distribute many technologies from Custom Engraved Steel Stamp & Dies to Electro-Chemical Etching, Computerized Dot Peen Marking, Computerized Engraving and Galvo Driven Laser Marking Systems. We formulate Custom Marking Inks & Solvents for direct, offset and Inkjet Marking applications. We manufacture Metal Nameplates custom to suit the exact needs of the customer, we produce Custom Cut Rubber Stamps & Dies and an extensive range of Custom Cut Stencils from Mylar, Oilboard, Plastics and various Metals. It’s hard to make mention of all the bases we have cover to help look after all of your Part Marking requirements.
Give us a call. Our Part Marking Specialists are here to review your requirements and assist you.
Call us Toll Free at (833) 219-1212
or using our local (905) 639-0909
You’re always welcome to reach us anytime by e-mail at email@example.com
Having Custom Metal Nameplates made or populating the variable data on existing plates is fast, easy and very cost effective to do.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn about the different Nameplate Technologies we use to produce Custom Metal Nameplates and Decals to your exact specifications in just a couple days regardless of quantity.
** VISIT US AT EASTEC 2019 **
Some of our most popular processes include Photo Resist Deep Etch & Fill, Anodized Aluminum Plates, Screen Printed Plates, Laser Etched, Metal Photo, Laser Sintered and more…..
We also maintain a full stock of our Marksman Series Computerized Dot Peen Marking Systems and Small Bench-top Galvo Driven Laser Marking Technologies which are ideal for the fast, efficient creation or population of variable data on existing Pre-Printed Plates.
Contact our Part Marking Specialists for more information at:
T: (905) 639-0909
W: marksmanmarkingsystems.com or millenniumsignatures.com
Millennium Signatures has two (2) different sizes of Nameplate Holding Fixtures in stock which are adjustable and work with square or rectangular Metal Nameplates.
These fixtures get a secure hold on your plates and positively locate them to the top left corner while you populate the variable data on your Nameplates using Laser Etching, Computerized Dot Peen Marking, Computerized Engraving or Scribing Technologies.
We also made Custom Nameplates using several technologies and from various materials.
Contact our Part Marking Specialists to inquire about any of our Marking Systems, Accessories and Services.
T: (905) 639-0909
W: millenniumsignatures.com and marksmanmarkingsystems.com
“When chemically etching information on Titanium, less is often more…”
For the best Electro-Chemical Etch results on Titanium, use Millennium Signatures Electrolyte Formulation
X4R-416 at a Medium to High Power Setting in the DC Output Mode on most Power Units. A good Deep Etch Power Unit is ideal for optimal results. Getting a high contrast light surface mark on Titanium can be challenging, if your specs will accommodate, it’s actually easier to get a very sharp crisp marking by etching down a couple thousandths of an inch (0.002”) or 0.051mm which is easily achieved with a few very quick, light applications of the hand marker as not to generate too much heat.
Give the surface a very quick light scuff with a Scotch Brito abrasive type pad and you should have a beautiful, razor sharp, high contrast etch which is often easily mistaken for a laser quality marking.
Remember to keep your Monopad very damp with the X4R-416 Electrolyte Formulation, but not dripping all over your part and workstation. Too much heat can be the enemy when marking most metals, this is especially true when marking Titanium.
Use Standard Neutralizer or our Extra Strength X4R-900 Neutralizer to thoroughly clean the areas that came in contact with the electrolyte.
Results may vary slightly when using different grades of Titanium, but these tips typically serve well on all Titanium Etching Applications. A good ground connection in close proximity to the area you’re marking is always important.
For more information on the best Electro-Chemical Etching Equipment, Accessories and Supplies for a given application, be sure to check our other HELPFUL MARKING TIPS SERIES Blogs and posts on Facebook, Instagram and LinkedIn as well as at our Website: www.millenniumsignatures.com
Contact our Part Marking Specialists at (905) 639-0909 or by e-mail at firstname.lastname@example.org
This Helpful Marking Tip was brought to you by Jeff Guenther of Millennium Signatures Marking Systems Inc.
THE MINILASE SERIES available from Millennium Signatures Marking Systems Inc.
An incredible solution or companies that have been wanting to have their own Galvo Driven Laser Marking capability in-house. The Minilase Series offers an easy solution because it’s the whole package is a very clean simple offering. It’s not complicated, the Minilase machines are nice and compact bench top designs that are very well constructed extremely SAFE and EASY to use. These systems are designed to meet CDRH Class I specifications. They are all state-of-the-art Galvanometer based systems that provide incredible power density at its focal point and delivers lightening fast, razor sharp imaging as good or better than you will find on any Galvo Driven design anywhere. Leaps and bounds more efficient and more precise than Flat Bed Flying Optic based technology. Minilase is a favorite of many because it just makes buying a Fibre Marking Laser simple. All systems are easily portable. They all regular standard 110-Volt power and they are all air-cooled. It’s truly the best value you will find for the money. If you’re looking to do it right, you want to purchase a Minilase!
If you should be faced with larger, heavier parts or configurations that require multiple axis material handling capability, there are our other products such as the Zetalase Series, or our Customizable Integration Series Lasers known as “The Scorpion Series” and/or “The Vereo Series”. All of these laser systems are built right here in the United States of America 🇺🇸 in a brand-new 100,000 sq.ft. TYKMA Electrox facility in Chillicothe Ohio.
Millennium Signatures Marking Systems Inc has partnered with TYKMA Electrox in the capacity of Exclusive Canadian Distribution, Field Service and support because we have over 27 years in the Laser Marking business and we wanted only the highest quality systems and from a highly organized, local operation with great communication and giving us easy access to product. TYKMA Electrox is very aggressive with leading the industry with new innovation and we are proud of the products they build. It is our pleasure to be able to bring these laser products to the Canadian Marketplace and provide full sales support, application testing and demonstration capabilities as well as highly trained technicians that can provide fast and effective fully outfitted on-site support if needed in the future.
We have an inventory of product and replacement parts in stock at all times.
Contact Millennium Signatures Marking Systems for information on our Marksman Series Pin Marking Systems in three (3) different configurations including Standard Bench-top, Hand-Held Portable and our Integrator Series – Compact (Universal Mount) Marking Heads.
Perhaps most popular is our unique Rotary Marking System. Our system has a larger more robust Rotary Drive than the competition and is mounted on a positive locating, precision slide. This allows larger, heavier parts to be marked as compared to competitive products, but also allows you to slide your circumferential part marking job out from under the Marking Head within seconds allowing you to switch to a flat part marking and back again without time consuming set-ups and programming.
Visit our website and check out our blog for all of the benefits of making Marksman your Marking System.
Systems of all configurations in stock and shipping from our Buffalo, NY Facility.
Contact our Technical Sales Team for more information on Computerized Dot Peen Marking Systems and our many other Product Identification Products and Services.
Tel: (905) 639-0909