COMBINATION MARKING

When using a Hand Held Portable Marker to stamp identification onto your parts, it’s easy when it comes to larger, heavier parts or assemblies and nothing could be better given the computerized solution that offers cord-free portability and comfort. However, it could be challenging or impossible to mark small components should the need arise. 
For this reason, Millennium Signatures introduces our Combination Marker Set-up. Combining our T-300 Base & Column used for some of our Bench Top configurations with our very popular MKP-054 Blue Tooth Enabled Battery Powered Hand-Held Marking Head now allows you to effectively holster that Portable Marking Capability quickly into a Bench Top Marker configuration making it very easy to mark small tools, couplings, valves or almost any small metal or plastic components that would have been hard to do with a portable previously. It also makes it useful for marking small Nameplates with great precision. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. To learn more about how to get more out of your Marksman Hand-Held Portable Marking System. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

SHOWROOM & APPLICATIONS TESTING FACILITIES

Millennium Signatures Marking Systems’ Facility in Burlington, Ontario is equipped with the latest models of TYKMA Electrox Galvo Driven Laser Marking Systems. We encourage those interested in this technology to call us and plan a visit to see this equipment in operation. We have Fibre Laser Technology of various sizes, wattages, Class I & Class IV configurations etc. We have highly experienced technicians who can test the various systems on your products helping you decide what is the optimal configuration for your exact needs. We are happy to demonstrate the equipment for you in a direct one-on-one consultation. 
We have the Laser Gear Series, the Minilase and Zetalase Series as well the Scorpion Series Lasers. 
Contact our Part Marking Specialists today and arrange an appointment 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

 

EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

BALL SCREW vs PRECISION REINFORCED COG BELT Driven Dot Peen Marking Systems

Millennium Signatures “Marksman Series” Computerized Dot Peen Marking Systems is a comprehensive collection of equipment models, all offering their own unique features and abilities. 
Among their many differences, they can be quite easily divided simply into two (2) groups just by the drive technology they are equipped with. 
We have the Precision Reinforced Cog Belt Driven models and the slightly higher-end Ball Screw Driven models. While it’s true the Ball Screw Technology does have some advantages over the Reinforced Cog Belt Driven models, don’t fall into the thinking that the Reinforced Cog Belt Driven Systems are inferior or not worthy for those of you who believe strongly in buying a good product and doing things right the first time!
It is true that Ball Screw is a little more precise and does have better registration, repeatability long term, but the reality is they really only show an advantage in some situations. For example, if you are doing Machine-Readable Codes all the time on a regular production basis and your markings are not only required to be clean, sharp and precise to the naked eye, but also to today’s world of high definition scanning technology, then yes there would be an advantage to going to a Ball Screw Design for the very best possible code generation. Ball Screw is also beneficial when it comes to longer distances as in the X or Y-Axis travel of your Marking Head. Our Model MH-250 Marking Head which features a larger marking area of 250mm (9,84”) x 250mm (9.84”) is an example of where we use the Ball Screw Drive mechanism because it allows for us to maintain a tighter tolerance over a greater span. If we build custom Marking Heads for a customer that cover an even larger span, naturally we would continue to stay with the Ball Screw Drive. 
Ball Screw is also a little longer lasting, so should your machine be running around the clock or performing a very high number of cycles every hour ongoing then this might be a reason to invest in the slightly more expensive Ball Screw Driven Technology. Ball Screw Systems also yield some additional benefit when marking really small characters. The extra precision of these units will start to show when marking characters under 2.0mm in height with one of our precision marking tips such as the PH-16 or the LP-06. 
However, eight or nine of every ten Computerized Dot Peen Marking Systems sold are based on the Precision Reinforced Cog Belt Driven Technology and it is not to be underestimated. It is remarkable the character generation and repeatability these systems provide, year after year. They are also highly proficient at Barcodes such as 2D Matrix, UID and QR codes, it’s only recommended to upgrade if these markings are very high in volume. 
When demonstrating these systems, most clients will not even ask to see the Ball Screw Driven models as they feel it is not at all necessary. The marking is extremely clean and the codes read perfectly. The feedback we get from clients that have owned these systems for years, consistently indicates that they continue to perform like new. There is no noticeable deterioration and they are very happy with the reliable, maintenance-free experience they have had.
We have a lot of great Marking Systems for you to see. Regardless which Drive Design you feel is right for you, Marksman Systems are extremely well designed, easy to use and very well priced. 
Contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#MarkingSystemsCanada #MarkingSystemsUSA #MarkingTechnologies#EngravingSystems #EtchingSystems #LaserMarking #PartMarkingCanada#PartMarkingNorthAmerica #DotPeenMarking #AerospaceMarking#MarkingProducts #MarkingMethods #BallScrewMarkers #BeltDrivenModels#Marksman #MarksmanMarkingSystems 
#MillenniumSignatures #MilSigMarking

73XNW MARKING INK

What to know about 73X and 73XNW Series Aerospace Grade Marking Inks.

BASIC DESCRIPTION
This is our most versatile marking ink. For the past 20 years, it has been used by leading aircraft and space component manufacturers for general purpose marking. In space applications, the out-gassing characteristics are extremely low.

SPECIFICATIONS
When applied properly, the ink meets or exceeds the performance requirements of G.S.A Specification: A-A-208 TYPE I

WHERE TO BUY
Supplied by Millennium Signatures Marking Systems Inc., they are shipped from Buffalo, New York in the USA or Burlington, Ontario in Canada.

DANGEROUS GOODS
This product is classified as a “Dangerous Goods” product and in some cases will require some additional fees to cover costs associated with the special packaging, labelling, documentation of the product above and beyond the transportation fees themselves. This is unavoidable in a lot of cases

RECONDITIONER
Along with the Aerospace Grade Marking Ink which is available in a variety of colours, but always maintained in stock in BLACK, RED and WHITE if the 73XNW Grade “Reconditioner” which is the corresponding solvent which should be used to thin the 73XNW Series Marking Inks or used in Clean-up Applications. It is not a requirement that both be purchased, they are sold independent of one another, but it is recommended that you have Fresh Reconditioner on-hand if you are using the Marking Ink.

BASE
The base of this Marking Ink is Ethyl Alcohol. This is NOT a two-part Marking Ink. It is ready to use right out of the bottle unless it should need to be thinned out some using the Reconditioner to suit your application.

SHELF LIFE
When stored in a cool place in a sealed container it is stable for a minimum of one (1) year. However, periodic exposure of this ink to the air will cause it to become more viscous (thicken). The addition of the 73X Reconditioner will thin the ink back to a suitable consistency.

DRYING TIME
Room Temperature, humidity and ink film thickness all may have a significant effect in drying time. 
On average, however, the ink when applied with a rubber stamp and pad will dry to the touch in approximately 6 minutes.

CORROSION
Since this ink is NOT compounded with any toxic or harmful acids, it is non-corrosive on Aluminum Alloys, Magnesium, Stainless Steels, Titanium or many of the exotic Space Grade metals.

APPLICATION
It is recommended that the use of a Rubber, Cloth or Linen Type of Stamp in combination with a Stamp Pad is best. All of these items are available through Millennium Signatures Marking Systems Inc., and Custom Stamps can be shipped out within 24-48 Hours. 
Call (905) 639-0909 or e-mail our Part Marking Specialists at info@millenniumsignatures.com for more information. 
We are here to support your inquiries and can offer more detailed information about how best to apply your ink markings and get the best results!

COLOURS
73XNW Marking Ink is available in BLACK, Yellow, Silver, RED, Blue, Green, Orange and WHITE. We typically only focus on maintaining fresh batches of BLACK, WHITE and RED in stock at all times. However, if the other colours are needed, we can have them ready for shipping within a few days.

For all your 73XNW Inquiries, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#73XReconditioner #73XNW #73XNWAerospaceMarkingInk#LowOutgassingMarkingInk #MarkingInks #MillenniumSignatures#MarkingProducts #MarkingMethods #CustomRubberStamps #InkPads#MarkingMethods #AircraftMarking #MarkingSpecifications#MarkingSolutions #AerospaceGrade #ComponentMarking

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

PARAMETER TESTING

When you purchase a TYKMA Electrox Built Laser Marking System we can provide you with a Parameter Testing Grid Program which will allow you to execute this marking program on a piece of the material you intend to work with. It will quickly guide you to the best Speed, Power and Frequency settings to get the desired level of contrast and clarity for your markings. 
An excellent tool for those new to using Galvo Driven Laser Technology. The technology is just amazing and it will likely surpass all your Part Marking / Product Traceability expectations. This little aid just makes your initial set-up that much faster and more accurate. 
Contact our Part Marking Specialists about this little (no charge) option. 
We can be reached Monday thru Friday from 8:30am to 4:30pm Eastern Standard Time. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

MARKING Done Right ✅

MARKING done right  can really enhance the overall perception of your product once in your client’s hands. Contact the Part Marking Specialists at Millennium Signatures Marking Systems for information on acquiring the right equipment for your application or how to utilize our Custom Part Marking Services and have us mark your parts for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

CUSTOM PART MARKING

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about Custom Part Marking Services also commonly referred to as “Contract Marking”. Since 1990 we have been selling, servicing and supporting Galvo Driven Fibre and CO2 Laser Marking Systems. 
Part marking services performed same day / next day in most cases. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and marksmanmarkingsystems.com

CUSTOM LASER SINTERED METAL NAMEPLATES

At Millennium Signatures Marking Systems Inc., we prepare Metal Nameplates and Signs to your exacts requirements. Various materials, various thickness, with holes and slots or without. Square corners or rounded corners, whatever you need. We have several processes including Aluminum Anodized Plates, Deep Etch & Fill on Steel & Aluminum, Engraved & Filled and our most popular process Custom Laser Sintered Metal Signs and Nameplates.
Our unique Laser Sintering Process uses a special formulation of granular ceramic materials baked into the cavity created while Laser Marking. This process is highly effective on Stainless Steel and Aluminum Plates and Products. 
The marking is approximately 0.004” in depth and the ceramic powder that is fused into the material provides a Beautiful even texture and great contrast! Laser Sintered Nameplates have been proven to meet the requirements of ASME Certified Shops and are far less expensive than the Deep Etch & Fill Process, especially when it comes to a variety of different variable data or low volumes. 
In addition to Custom Laser Sintered Nameplates, our Custom Part Marking Division also uses this process in some situations to custom mark our clients’ parts. It’s very pleasing to the eye. It’s very durable and most of all, it’s very versatile and cost-effective. 
Contact our Part Marking Specialists today about Laser Sintering or any of our Metal Sign and Nameplate Technologies. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or marksmanmarkingsystems.com