73XNW MARKING INK

What to know about 73X and 73XNW Series Aerospace Grade Marking Inks.

BASIC DESCRIPTION
This is our most versatile marking ink. For the past 20 years, it has been used by leading aircraft and space component manufacturers for general purpose marking. In space applications, the out-gassing characteristics are extremely low.

SPECIFICATIONS
When applied properly, the ink meets or exceeds the performance requirements of G.S.A Specification: A-A-208 TYPE I

WHERE TO BUY
Supplied by Millennium Signatures Marking Systems Inc., they are shipped from Buffalo, New York in the USA or Burlington, Ontario in Canada.

DANGEROUS GOODS
This product is classified as a “Dangerous Goods” product and in some cases will require some additional fees to cover costs associated with the special packaging, labelling, documentation of the product above and beyond the transportation fees themselves. This is unavoidable in a lot of cases

RECONDITIONER
Along with the Aerospace Grade Marking Ink which is available in a variety of colours, but always maintained in stock in BLACK, RED and WHITE if the 73XNW Grade “Reconditioner” which is the corresponding solvent which should be used to thin the 73XNW Series Marking Inks or used in Clean-up Applications. It is not a requirement that both be purchased, they are sold independent of one another, but it is recommended that you have Fresh Reconditioner on-hand if you are using the Marking Ink.

BASE
The base of this Marking Ink is Ethyl Alcohol. This is NOT a two-part Marking Ink. It is ready to use right out of the bottle unless it should need to be thinned out some using the Reconditioner to suit your application.

SHELF LIFE
When stored in a cool place in a sealed container it is stable for a minimum of one (1) year. However, periodic exposure of this ink to the air will cause it to become more viscous (thicken). The addition of the 73X Reconditioner will thin the ink back to a suitable consistency.

DRYING TIME
Room Temperature, humidity and ink film thickness all may have a significant effect in drying time. 
On average, however, the ink when applied with a rubber stamp and pad will dry to the touch in approximately 6 minutes.

CORROSION
Since this ink is NOT compounded with any toxic or harmful acids, it is non-corrosive on Aluminum Alloys, Magnesium, Stainless Steels, Titanium or many of the exotic Space Grade metals.

APPLICATION
It is recommended that the use of a Rubber, Cloth or Linen Type of Stamp in combination with a Stamp Pad is best. All of these items are available through Millennium Signatures Marking Systems Inc., and Custom Stamps can be shipped out within 24-48 Hours. 
Call (905) 639-0909 or e-mail our Part Marking Specialists at info@millenniumsignatures.com for more information. 
We are here to support your inquiries and can offer more detailed information about how best to apply your ink markings and get the best results!

COLOURS
73XNW Marking Ink is available in BLACK, Yellow, Silver, RED, Blue, Green, Orange and WHITE. We typically only focus on maintaining fresh batches of BLACK, WHITE and RED in stock at all times. However, if the other colours are needed, we can have them ready for shipping within a few days.

For all your 73XNW Inquiries, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#73XReconditioner #73XNW #73XNWAerospaceMarkingInk#LowOutgassingMarkingInk #MarkingInks #MillenniumSignatures#MarkingProducts #MarkingMethods #CustomRubberStamps #InkPads#MarkingMethods #AircraftMarking #MarkingSpecifications#MarkingSolutions #AerospaceGrade #ComponentMarking

Galvo Driven Fibre Laser Marking Equipment for the Lowest Price its EVER Been!

The opportunity to buy really good Galvo Driven Fibre Laser Marking Equipment for the lowest price its ever been is now! The NEW Laser Gear Series presents an opportunity that for many, was far less attainable just a year ago.
The Laser Gear Series is a seamless new Benchtop Marking Solution that uses high-grade components and is carefully packaged to offer so much more than ever before.
At nearly half the price of similar systems, the Laser Gear Series has been developed specifically to give small business or lower volume users a very high precision piece of marking equipment with all the versatility needed for so many different marking applications. You truly get to pay less without compromising on quality, capability, or support. Millennium Signatures Marking Systems is very proud to be able to provide this product. Available in Class I and Class IV configurations in either 20-Watt or 60-Watt power output. Theses Fibre Lasers will definitely Impress!
Contact our Part Marking Specialists for more information on this exciting new series of Fibre Marking Lasers.

We can Handle your Delicate Parts!

Even parts that need to be handled very delicately to avoid scratching or other forms of damage can be processed reliably by Millennium Signatures Custom Part Marking Division. Our operators are highly experienced and trained to follow customer instruction properly, unpacking and repacking parts such that they are ready to put in your customers hands. 
Special non-slip gloves are used to handle parts and protect the operators. Parts are unpackaged on special tables which protect sensitive surfaces and prevent parts from being dropped or accidentally knocked onto the floor. 
Fixtures and nesting apparatus are often made of Nylon or covered with Felt to protect the parts. We do all that we can to protect your parts and take the processing of your parts very seriously. Send your parts to our facility for marking and check one more thing off that bottomless to do list. 
Contact our Part Marking Specialists to learn more about how best to proceed. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millenniumsignatures.com

WAIT!

We really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks

Working to Spec. is Something we do ALL DAY, EVERY DAY

Our customers provide us with all the unique specifics they are expected to follow when marking their customer’s parts and send them to us to make it happen. We understand the importance of “Low Stress” Marking and how it’s often necessary to meet or not exceed a certain marking depth for example. You can trust Millennium Signatures to review your specification thoroughly and consult with you before marking your parts. You can take comfort knowing that we can work from your drawings. 
We can produce a “First Article” for your review or we can use good high-quality Digital Macro Photography to take a series of photos of the First Article Component for inspection sent electronically by e-mail. We don’t start marking your parts until you’ve signed off confirming you like the results we’ve achieved. For almost 50 years, we’ve spent every day helping people get the best marking possible on their parts!
We have several clients that fly batches of parts halfway around the world to make sure their challenging requirement are marked properly. 
Contact our Part Marking Specialists to discuss why allowing our Custom Part Marking Division to mark some of your parts for you might be highly beneficial especially if you’re in the market to purchase equipment for your own in-house processing. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com
or marksmanmarkingsystems.com

What makes the Minilase XL such a Versatile and Unique Laser Marking System?

Contact the Part Marking Specialists at Millennium Signatures Marking Systems to find out what makes the Minilase XL such a versatile and unique Laser Marking System. 
Available in 20-Watt and 50-Watt configurations, the Minilase XL is by far the perfect combination of features and design at an affordable price point. 
Contact us at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

Visit our website at
www.millenniumsignatures.com

MKP-054, Now with MAGNETIC BASE!

MKP-054

Millennium Signatures is very excited about the performance and success of our MKP-054 Bluetooth Handheld Portable Marking System. 
We have a very effective adjustable Magnetic Base attachment now which has proven far more effective than competitive systems. It clamps down securely on your Steel Fabrications and secures very well while the Computerized Marking Head puts very clean, permanent identification into the metal exactly as per your layout program which is created and sent from a nearby Mini-Controller or even our Cell Phone App which sends all the information over instantly using Bluetooth Technology. 
We maintain this equipment in stock at our US and Canadian Facilities. 
Furthermore, we provide fast efficient response to your inquiries and the systems are fully supported with a great technical staff that we are very proud of. Give us a try!
Reach out to our Part Marking Specialists using the following methods
T: 905-639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com
millenniumsignatures.com

Marksman MKP-054 Enhancements

Marksman Portable

Millennium Signatures Marking Systems is pleased to announce that we have recently made enhancements to our Marksman MKP-054 Hand-Held Portable Bluetooth Marking System. 
Our system has recently been improved with the ability to strike the material harder and using a variety of different fonts resulting in more marking depth and visibility for more durable markings that can in most cases be seen after a paint or powder coat process. 
We also have a very powerful NEW magnetic base that holds the Marking Head very securely during the marking process.

For more information, contact our Part Marking Specialists at info@millenniumsignatures.com or directly by phone at 905-639-0909
www.marksmanmarkingsystems.com

#MillenniumSignatures #PartMarking #PortableStamping#MarkingProducts #MarkingMethods #PermanentMarking #Engraving
#SteelStamping #Etching #LaserMarking #Marksman#ProductTraceability #QRCodes #2DMatrix #JeffGuenther

CUSTOM PART MARKING SERVICES

HISTORY

Millennium Signatures Marking Systems Inc. has an extensive history of selling and supporting Part Marking Technologies or Traceability Systems to the Manufacturing sector going back as far as 1972. Despite that its principal business is to sell, integrate and support the various methods of marking, we also have a very successful Custom Part Marking Division which has been servicing hundreds of clients for almost 15 years now. We have taken our extensive knowledge of Part Marking practices and our impressive range of equipment and made our services open to any clients who do not wish to invest in the technology for one reason or another or who wish to essentially get their products out onto the field and trial the marking results before committing to a process. There are many advantages to outsourcing your marking even if just initially. Let us do the hard work for you.

EXPERTISE

Those staffing the Millennium Signatures Custom Part Marking Division have extensive knowledge of how to work the various technologies and work to even the most rigid specifications. We can take on the marking of complex part configurations much more effectively that someone new to the process. Our pricing is very effective, and our turn-around times are said to be “excellent” based on feedback from our existing client base. Some of our clients bring their parts to us because they’re volumes are too low to justify an equipment purchase, others just don’t have the time or expertise. However, our Custom Part Marking Services provides another very valuable option for those considering buying their own equipment.

ADVANTAGES

If you send your parts to Millennium Signatures Marking Systems for processing, we will design proper fixturing that will positively locate and secure your part during the marking process. We will create layouts and programs allowing the chosen technology to execute the marking sequence properly and we will always provide First Article Samples or detailed photos to the client before proceeding with marking a batch of their parts. You can pay us to mark a single batch of your parts or you can bring us batches of parts for marking for years and years. When you’re ready to make a purchase, Millennium Signatures will not only outfit you with the proven hardware selection we use to process your parts, but we will bring our NEW equipment to your facility, install it and train your operators. The beautiful thing is that we will hand over all the fixtures, programs, layouts, stencils, artwork or any other production aids that we used to mark your parts, so you are now instantly in production. You will have absolutely everything you need to make the perfect impression from the time we walk out of your facility. Going about it in this way allows you to get the marking you need to be done (by professionals), it allows you to see and experience the results before committing to any significant cash outlay and there is never any expectation of an equipment purchase. However, if you do you will know you are selecting the right equipment for the job and you will be provided with absolutely EVERYTHING you need to get started.

PROCESSES

Our Custom Part Marking Services Division offers the following technologies which can be used to mark your parts, Electro-Chemical Etching, Engraving, Computerized Dot Peen Stamping, Ink Marking and both Fibre and CO2 Laser Marking. If you are not sure which technology is best for your application, contact our Part Marking Specialists at info@millenniumsignatures.com or by phone at (905) 639-0909 and have us evaluate your application properly and give you our recommendations.

RECOMMENDATIONS

It is strongly recommended that if you are having us process your parts for the first time, that you provide us with extra parts, scrap parts or spares. It is always best to have an actual part that we can set-up and test with before starting to run production on a good batch of parts. If a spare part is not available, it is quite possible we can still get you a perfect marking from the start, but a close second would be to get a sample piece of the very same material and surface condition as the actual parts we would be expected to mark.

If absolutely nothing is available, it is likely with our expertise that we can still get you a highly acceptable marking the first time, but it’s a much more challenging task for us and it may take longer or the first part or first few parts of that batch may be less than ideal before we manage to dial the settings in just right to secure a perfect marking for all the rest. There is no other alternative, however with all that we see on any given day our chances of getting a highly acceptable mark is much better than for most anyone else.

POLICIES

We often see hundreds and sometimes thousands of parts processed in our facilities each day. We have an unbelievable record for accuracy and acceptability among our clients, but things can happen for a multitude of reasons ranging from very confusing instructions from clients to inconsistencies in the product to hardware/software failures and on occasion even human error. We have created a process whereby we evaluate the client’s job, we review the materials sent. We prepare a sample and we either send the sample to the client for an approval (if time permits) or in most cases, we are asked to take good quality close-up images of the marking results and transmit them electronically to our clients for review and approval before proceeding onto multiple parts. If an error takes place that is deemed to be the fault of Millennium Signatures Marking Systems role in the processing of parts, Millennium Signatures limits its liability to the cost of remarking parts only. Millennium Signatures Marking Systems Inc. is to be in no way held responsible for the costs associated with removal of unwanted markings, recoating, reworking or replacement of customer supplied parts. There is simply too many variables and an extreme range of different products and circumstances for Millennium Signatures to take on such responsibility. Given, such circumstances, our team takes our responsibility very seriously and treats all customer supplied components with the highest levels of care and consideration.

PACKAGING & HANDLING

Please consider that we appreciate that expensive parts that are time-consuming to produce need to be protected and need to be transported carefully. Out of respect to our clients, we go through a series of procedures to ensure that our client supplied products are handled in such a manner that accidental dropping or scratching etc. is minimized if not eliminated. Our processes include handling the part as little as possible, working over anti-fatigue matting on floors and workbenches to cushion any unexpected impacts. We take the parts from any protective packaging, mark the part to specification and return immediately to the same packaged state they are received unless instructed in writing to do otherwise. Our fixturing is custom made on-site out of Plastics, Acrylics and Nylons to prevent scratching or scuffing of parts while being processed. We even wear gloves and can use a lint-free microfibre polishing cloths to clean up parts of any fingerprints if they are decorative parts such as chrome fixtures etc.

CUSTOM MARKING REQUESTS & INFORMATION

If you are thinking of having our Part Marking Specialists process some of your parts for you, please call us at (905) 639-0909 or send us an e-mail at info@millenniumsignatures.com. Allow us to answer your questions, quote on your requirements and discuss your special requirements. We see all kinds of unique requirements daily and we are confident we can accommodate yours.

 

RENT A MINILASE

Millennium Signatures, the Part Marking Specialists…
Are you looking to mark your parts using State-of-the-Art Galvo Driven Fibre Laser Technology? We have a very high-quality Class I, Bench Top solution available for purchase, rental or lease. 
The Minilase Series systems install in minutes and will have most operators performing basic marking on their parts within the first 30 minutes with ease. 
The New Minilase Pro 3 Software is packed with capability while maintaining an extremely easy to use interface. It’s Laser Part Marking made fast, easy and reliable!
Contact our Part Marking Specialists for more information today. 
Millennium Signatures Marking Systems Inc. with facilities in Burlington ON, Canada and Buffalo NY, USA
Call us at (905) 639-0909
E-mail us at info@millenniumsignatures.com 
#LaserMatking #PartMarking #LaserEtching #LaserEngraving#MarkingProducts #MarkingMethods #MillenniumSignatures#TYKMAElectrox #MarkingSystems #MarkingDevices #BenchtopLasers#PermanentMarking #FibreLasers #MarkingSolutions