COMBINATION MARKING

When using a Hand Held Portable Marker to stamp identification onto your parts, it’s easy when it comes to larger, heavier parts or assemblies and nothing could be better given the computerized solution that offers cord-free portability and comfort. However, it could be challenging or impossible to mark small components should the need arise. 
For this reason, Millennium Signatures introduces our Combination Marker Set-up. Combining our T-300 Base & Column used for some of our Bench Top configurations with our very popular MKP-054 Blue Tooth Enabled Battery Powered Hand-Held Marking Head now allows you to effectively holster that Portable Marking Capability quickly into a Bench Top Marker configuration making it very easy to mark small tools, couplings, valves or almost any small metal or plastic components that would have been hard to do with a portable previously. It also makes it useful for marking small Nameplates with great precision. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. To learn more about how to get more out of your Marksman Hand-Held Portable Marking System. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

SHOWROOM & APPLICATIONS TESTING FACILITIES

Millennium Signatures Marking Systems’ Facility in Burlington, Ontario is equipped with the latest models of TYKMA Electrox Galvo Driven Laser Marking Systems. We encourage those interested in this technology to call us and plan a visit to see this equipment in operation. We have Fibre Laser Technology of various sizes, wattages, Class I & Class IV configurations etc. We have highly experienced technicians who can test the various systems on your products helping you decide what is the optimal configuration for your exact needs. We are happy to demonstrate the equipment for you in a direct one-on-one consultation. 
We have the Laser Gear Series, the Minilase and Zetalase Series as well the Scorpion Series Lasers. 
Contact our Part Marking Specialists today and arrange an appointment 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

 

DID YOU KNOW…

Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

THINGS TO CONSIDER WHEN BUYING A GALVO DRIVEN LASER MARKING SYSTEM

There is that old saying “Do it once, do it right!” This is something that we really believe in at Millennium Signatures Marking Systems and we want to help you to consider the most important things when looking to purchase a new Laser Marking System for your Facility.

Q: Where is it made and who supports the equipment?

A: One of the things we see weekly is companies calling us in desperation with a laser system that was bought at auction or through a sister company from somewhere overseas and they can’t get quality support, anxious for us to offer instruction on the use of the system, configure or repair their system. Millennium Signatures only supports TYKMA Electrox built Laser Systems. If you want to be supported by the best, buy the best!

All Millennium Signatures, Laser Systems are produced in a very state-of-the-art, 100,000 square foot TYKMA Electrox facility in Chillicothe Ohio in the USA. Just as Millennium Signatures is as the Canadian arm of this global network, the other distributors worldwide are all extremely knowledgeable and have full field service capability and highly effective remote access support, we all stock spare components and all have strong access and communication to the technical assets on the factory floor. The distribution partners not only have excellent support from the factory level but also work to support and back each other up making sure that all our end-users get the support they need. You will not find a larger more experienced support network behind any competitive Galvo Driven Laser Marking Product.

Q: What is the warranty coverage of the system you’re looking at?

A: It’s true, the best-built products are backed by the best warranties!
All TYKMA Electrox built Laser Systems with the exception of the Laser Gear Series are backed by a comprehensive 3-Year Warranty. The Laser Gear Series is our entry-level line of lasers which are carefully designed to be available at a reduced price point to make the purchase of Laser Technology a bit easier for some and done without giving up quality or too much capability. For these reasons the Laser Gear line is fully supported for 18-Months from the time of delivery.

Q: Is it easy to use? My facility is fairly remote from urban centres, will I need to spend a lot on on-site Installation and Training?

A: We approach this situation on a case-by-case basis. If you want us at your facility, we will be there! Some costs will be involved if travel is necessary, but most lasers are received, unpackaged and set-up by our customers without the physical presence of a technical on-site. The systems are very easy to set-up and use. Everything from the way the packaging is designed for transport to the way Software and Drivers is installed has been carefully designed in consideration of this situation. You will always be supported with whatever level of service you require, but the technical team at Millennium Signatures and the Technical Team of TYKMA Electrox behind them are highly experienced with how to walk new customers through the basic steps and getting them operational quickly. Let’s not forget about the series of professionally made, easy to follow video tutorials that come on the flash drive included with your system. Plug it into a USB Drive, select one of the nine (9) basic descriptions of the task you want to know about and press play!
Even for those who are not feeling confident about taking on this new technology at all, the well-written and well-organized manual, along with video tutorials, telephone support from our technicians and highly effective remote access to your system on-site, most clients are very surprised just how easy it is and how quickly we can have you up and running. We can even offer a completely loaded and pre-configured Lenovo Business Grade Laptop be sold with your system making it so it just could not be any easier coming out if the box.

At Millennium Signatures, you are always welcome to supply us with sample parts before you receive your system and we can assist you by creating some positive locating fixtures and part marking layout files in advance and sending them with your system allowing you to potentially start production marking within an hour of opening the box!
All perfectly pre-configured and tested back at one of our facilities for a plug and play start-up!

GALVO DRIVEN Laser Technology is always the way to go. It’s a little more expensive than Flat Bed Flying Optic based machines but far outperforms and outlasts those highly mechanical systems. TYKMA Electrox Lasers are proven time and time again to be extremely fast, reliable and maintenance free. Contact the Part Marking Specialists at Millennium Signatures Marking Systems for more information 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

#LaserMarkingCanada #TYKMAElectrox #LaserEtching #MarkingSystems#MarkingProductsCanada #LaserMarkingTechnology #GalvoLasersCanada#MilSigMarking #PartMarkingCanada #MinilaseCanada #LaserGearCanada#LaserMarkingServices #LaserMarkersCanada #MarkingMethods#PermanentMarkingCanada
#LaserEngravingCanada #DeepLaserMarking
#MarkingEquipmentCanada
#PartMarkingSpecialists.

EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

It’s one thing to have the right equipment…

Part Marking Services serve some better than you might expect. It’s one thing to have the right equipment, but knowing the in’s and out’s of that equipment, knowing how to use all the features and get the most out of that equipment is not all that common among end-users. 
We know this because we provide equipment to end-users every day and provide detailed instruction and support on how to use the equipment efficiently and effectively. 
However, between staff turn-over and other internal changes, often we visit client sites months later and despite the clients say the systems working great and they are happy with their purchase, most often they are not using the systems to anywhere near their full potential. 
At Millennium Signatures we know all the equipment we sell inside out! We work with it every day on real-world applications, we service it and are very aggressive with updating and staying on top of the latest advancements in the industry and sometimes sending your work out for processing is very beneficial cause you can get much better results, faster and with no waste by allowing the Part Marking Specialists to do it for you. 
If you are an end-user already equipped with our equipment and feel that you’re no longer getting the full potential out of your system, call us. We can come to your facility and provide full training, we can design and build fixtures, provide additional tooling and help by creating layouts and programs. We know keeping on top of everything is an exhausting process, don’t hesitate to ask us to help!

So regardless if you choose to purchase equipment or utilize our services, the Part Marking Specialists at Millennium Signatures want you to get the very best results and the most from your purchase. Reach out to our team today
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millennium Signatures.com and
marksmanmarkingsystems.com

#ContractMarking #MarkingSystems #MarkingServices#CustomPartMarking #Etching #PermantMarking #LaserMarking#LaserMarkingSystems #CustomFixturing #Engraving #PartMarking#AerospacePartMarking #NuclearPartMarking #LowStressMatking#MarkingProducts #MarkingMethods

PARAMETER TESTING

When you purchase a TYKMA Electrox Built Laser Marking System we can provide you with a Parameter Testing Grid Program which will allow you to execute this marking program on a piece of the material you intend to work with. It will quickly guide you to the best Speed, Power and Frequency settings to get the desired level of contrast and clarity for your markings. 
An excellent tool for those new to using Galvo Driven Laser Technology. The technology is just amazing and it will likely surpass all your Part Marking / Product Traceability expectations. This little aid just makes your initial set-up that much faster and more accurate. 
Contact our Part Marking Specialists about this little (no charge) option. 
We can be reached Monday thru Friday from 8:30am to 4:30pm Eastern Standard Time. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

New Benchtop Marking System!

We have a very exciting NEW Bench Top Marking System to tell you about. 
It’s called the MK-250/200BN complete with a Heavy Duty Rotary Axis on our unique CDC-20 Positive Alignment Slide.
This system is not entirely NEW as much as it is a seamless blend of other popular Marksman Series Marking Systems. Here are the Four (4) features that make it unique and more versatile than anything else you will find on the market.

1 > This system uses our latest and most compact Controller which is packed with features such as Ethernet, USB, Read/Write SD Card and RS-232 connectivity. This very compact controller comes with an ergonomic Mount +Tray to support the Mini-Keyboard.

2 > This system also incorporated our MH-250 High-Performance Ball Screw Driven Marking Head, which boasts a generous 250mm x 250mm marking area. This is ideal for large parts, multiple parts and excellent for Large Nameplate Marking applications. You can never go wrong with the speed and precision of a Ball Screw Driven Marking Head and the Extra Large Marking Field comes in handy more often than you realize.

3> This extra large Marking Head has been Integrated with our CDC-20 Positive Alignment Slide which is also equipped with a Rotary Axis. The CDC-20 has been modified to allow for the larger parts (or tray of multiple parts) to be supported under the Marking Head. The Positive Alignment Slide Feature allows you to slide your flat part marking applications out of the way bringing in the Rotary Axis with adjustable Tail Stock all the while maintaining perfect alignment for Circumferential Marking of Cylinders. Having this feature allows you to switch out from conventional static Flat Part marking to Rotary Marking and back again if needed in seconds.

4> The last of the major features of this unique new system configuration is the addition of our extra heavy duty Rotary Axis with large 3-Jaw Chuck. It’s much larger and has more torque and accuracy than other systems you’ll find on the market. Without any customization, the Rotary Axis will mark parts up to 6.0” in diameter and part weight in excess of 35lbs. With modification, if needed, we can easily exceed these bits the system will be considered custom and built to suit. This may result in 3-4 lead time. 
I promise you that if you’re looking for a Premium System with the versatility to take whatever part marking requirements come your way, this NEW system configuration will impress. 
It was so impressive upon our first system build, that we immediately built up more for inventory, this system is proving to be very popular because there is nothing close to it being offered anywhere else.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about our Marksman MK-200BN/250 c/w CDC-20 Rotary Axis. You can reach us Monday thru Friday from 8:30am to 4:30 Eastern Standard Time. 
T: (905) 639-0909
E: info@milleniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#LargeFieldMarking #DotPeenMarking #ComputerizedStamping#LowStressMarking
#Engraving #MarkingSystems #Marksman #PinMarkingSystems#MarkingTechnology #MarkingMethods #MarkingProducts #MarkingDevices 
#PermanrntMarking #DeepMarking
#NameplateMarkers #BallScrewDriven #JeffGuenther#MillenniumSignatures

73XNW MARKING INKS

Do you process Aerospace Components which require 73XNW Marking Inks & Solvents? Polyurethane Protective Top Coat Products Perhaps?

PART MARKING SYSTEMS & SERVICES, it’s what we do!

WAIT!

We really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks