More CO2 Laser Marking and Cutting Capabilities…

Millennium Signatures Marking Systems Inc. is proud to announce that we have, once again, invested more money into new and dynamic equipment to support our Custom Part Marking Systems Division. We have added more CO2 Laser Marking and Cutting capability, thus allowing us to mark larger components and cut larger sheets of material. We have added Power Programmable Tool Posts to some of our Galvo Driven Fibre and CO2 Laser Systems allowing us to maintain even more control when doing high contrast Annealed Markings or Circumferential Marking specifically when it comes to repeatability. We have also redesigned our work stations to allow component parts to remain protected and flow even better through our systems for improved throughput. 
Millennium Signatures remains committed to offering g a very high level of service priding ourselves on the expertise we bring, the level of equipment we provide and pricing and speed at which we turn our parts around for our clients.

For more information on our Contract Marking also known as Custom Part Marking Services, please contact one of our Part Marking Specialists at Millennium Signatures Marking Systems by calling us toll-free at 
1-(833) 219-1212 or by e-mail at info@millenniumsignatures.com
Local # (905) 639-0909
Websites:
millenniumsignatures.com
marksmanmarkingsystems.com

#MarkingServices #ContractMarking #LaserMarking #PermanentMarking#LaserEngraving #PartMarkingServices #ContractMarking #MarkingProducts #MarkingTechnology #MarkingMethods#MillenniumSignatures
#JeffGuenther #MarkingSystemsCanada

MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

New Benchtop Marking System!

We have a very exciting NEW Bench Top Marking System to tell you about. 
It’s called the MK-250/200BN complete with a Heavy Duty Rotary Axis on our unique CDC-20 Positive Alignment Slide.
This system is not entirely NEW as much as it is a seamless blend of other popular Marksman Series Marking Systems. Here are the Four (4) features that make it unique and more versatile than anything else you will find on the market.

1 > This system uses our latest and most compact Controller which is packed with features such as Ethernet, USB, Read/Write SD Card and RS-232 connectivity. This very compact controller comes with an ergonomic Mount +Tray to support the Mini-Keyboard.

2 > This system also incorporated our MH-250 High-Performance Ball Screw Driven Marking Head, which boasts a generous 250mm x 250mm marking area. This is ideal for large parts, multiple parts and excellent for Large Nameplate Marking applications. You can never go wrong with the speed and precision of a Ball Screw Driven Marking Head and the Extra Large Marking Field comes in handy more often than you realize.

3> This extra large Marking Head has been Integrated with our CDC-20 Positive Alignment Slide which is also equipped with a Rotary Axis. The CDC-20 has been modified to allow for the larger parts (or tray of multiple parts) to be supported under the Marking Head. The Positive Alignment Slide Feature allows you to slide your flat part marking applications out of the way bringing in the Rotary Axis with adjustable Tail Stock all the while maintaining perfect alignment for Circumferential Marking of Cylinders. Having this feature allows you to switch out from conventional static Flat Part marking to Rotary Marking and back again if needed in seconds.

4> The last of the major features of this unique new system configuration is the addition of our extra heavy duty Rotary Axis with large 3-Jaw Chuck. It’s much larger and has more torque and accuracy than other systems you’ll find on the market. Without any customization, the Rotary Axis will mark parts up to 6.0” in diameter and part weight in excess of 35lbs. With modification, if needed, we can easily exceed these bits the system will be considered custom and built to suit. This may result in 3-4 lead time. 
I promise you that if you’re looking for a Premium System with the versatility to take whatever part marking requirements come your way, this NEW system configuration will impress. 
It was so impressive upon our first system build, that we immediately built up more for inventory, this system is proving to be very popular because there is nothing close to it being offered anywhere else.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems about our Marksman MK-200BN/250 c/w CDC-20 Rotary Axis. You can reach us Monday thru Friday from 8:30am to 4:30 Eastern Standard Time. 
T: (905) 639-0909
E: info@milleniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#LargeFieldMarking #DotPeenMarking #ComputerizedStamping#LowStressMarking
#Engraving #MarkingSystems #Marksman #PinMarkingSystems#MarkingTechnology #MarkingMethods #MarkingProducts #MarkingDevices 
#PermanrntMarking #DeepMarking
#NameplateMarkers #BallScrewDriven #JeffGuenther#MillenniumSignatures

Marksman Website

We have a Website dedicated entirely to our Marksman Line of Computerized Dot Peen Marking Equipment. It presents a great deal of information on all our models including our Bench Top Markers, Hand-Held Portable Markers and our Integrator Series Compact Marking Heads for Assembly Line and Automated Cell applications. 
This site is dedicated just to this one product line and will be a great help to those looking to purchase pin Marking technology as well as those looking for supporting documentation, specifications and dimensions etc. 
We are constantly expanding to accommodate the demand as Marksman has become very popular throughout the USA, Canada and Mexico. Customers report that the quality, capability and reliability for the money spent is exceptional. For more information on the Marksman Series Marking Systems or any Part Marking Technology, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
#PartMarking #MarkingProducts #Engraving #MarkingTechnology #Etching#DotPeen #PinScribing #PinMarking #MarkingMethods #MarkingSystems#MillenniumSignatures #PortableMarking #ImpactStamping #JeffGuenther#PermanentMarking #MarkingSystems #LowStressMarking #LaserMarking#ChemicalEtching #AcidEtching #ChemicalEtch #PaperStencils#MarkingInks

MACHINE-READABLE CODES

Did you know that the Marksman Computerized Dot Peen Marking Technology from Millennium Signatures Marking Systems Inc. gives you the ability to mark your parts with 2D Barcodes, Military Spec UID Codes and QR Codes as well?

2 DIMENSIONAL CODES (2D)
Marking a 2D Code directly onto your part using our Computerized Dot Peen or Galvo Driven Laser Processes allows you to enter data such as work order #’s, Part #’s Lot #’s, Date Codes, pretty much any data at all into the system and have it automatically convert that data into square code that our equipment will allow you to permanently mark onto your parts. This code can be scanned using just about any of today’s readily available scanning technology and even very reliably with free apps, you can download for your smartphone cameras. This eliminates the concerns for labels coming off and potentially losing track of what revision of part you actually hold in your hand. It will always be there and easily accessible. It makes it very easy to track and inventory parts and can be very helpful in communicating with processes as they travel through automated production lines. For example, you can have parts scanned as they go through a process and rejected if parts should somehow become mixed or parts that are a fail can be marked to permanently confirm such important details.

UID CODES
UID Codes are a unique format of this 2Dimensional (2D Code) Technology that has been designed by the Military for their products and is often expected of manufacturers who are bidding to get such contracts that they will have the capability to mark the parts they would produce using this unique 2D Symbology.

QR CODES
QR Codes can be equally powerful, perhaps even more so in many ways. 
A QR Code is essentially a Hyperlink to a URL Address or File. For example, if you host your QR Code with Millennium Signatures or even through other sources, you can permanently print a small square code onto your part that will remain there long after any sticker, plate or other methods of marking would be lost due to any one of several variable elements of conditions. 
When scanning this code, it can immediately pull up a website or take you to a drawing or a document such as an entire manual potentially hundreds of pages of content if need be. There is really no limitations.
As long as that code is being hosted, the scanning of the code can instantly link anyone it’s a Barcode Scanner or Smartphone with a wealth of information about that part or product and it’s all controlled by you.
This information could even be changed after the mark is made potentially. Allow us to explain…..

POSSIBLE SCENARIOS
You build an assembly for Natural Gas Furnaces and there is some information such as exploded parts view, parts number listing and some installation and safety guidelines you always want available to your client. 
This means when it’s NEW out of the box of when being pulled out of a 20-year-old Furnace under repair. You completely control what information is instantly (almost magically) provides to your customer when scanned. 
However….. 4 years after production of this part, it is determined that there is a defect in the parts from manufacture or there is some reason to recall the parts. It is possible to redirect where the link that code represents a different destination or a REVISED or UPDATED destination or document. For example, a technician in the field could now remove this part and scan it with his cell phone only to learn immediately that there is a recall notice out on that part and instructions on what to do about it as a result. It is incredibly powerful if you know how to use it to its full potential.

Both Millennium Signatures Galvo Driven Laser Etching / Engraving Technologies and our Marksman Series Computerized Dot Peen (Impact Stamping) process’ can provide such markings. The beautiful thing about these Codes is not only are they so easy to create and apply to the part, they are also very permanent. If you pull a dirty, greasy part of a piece of equipment, just give it a wipe off or a scuff with a Scotch Brite Abrasive Pad or something similar and give it a scan. It’s permanently on the surface of the metal, plastic, porcelain or almost any material and will almost always produce for you when needed.

For more information on these Marking Technologies and the Systems we sell allowing you to put these markings on your parts, contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
We have facilities in Buffalo NY, USA and Burlington ON, Canada and we are currently in the process of establishing facilities in Mexico.

Main line for inquiries
Tel: (905) 639-0909

E-mail Inquiries:
info@millenniumsignatures.com

Head Office Hours:
Monday through Friday
8:30am – 4:30pm (Eastern Standard Time)

#2DCodes #QRCodes #UIDCodes #CodeMarking#BarCodeScanning #2DCodeMarking#MarkingMethods
#MarkingProducts #JeffGuenther
#MarkingTechnology #Marksman
#TYKMAElectrox #GalvoLasers #DotPeenMarking#PermanentMarking #QRCodeMarking#MillenniumSignatures #Etching#PartMarkingServices #Engraving #PartTraceability#PartIdentification
#MetalMarking