SCAN YOUR WORK ORDER

MARK YOUR PART. THAT SIMPLE!

We have now made it easier using our Marksman Series Dot Peen Marking Systems to scan a Barcode on a Work Order or Traveller and print the Human Readable data within that code directly onto your part using our App for your Smart Phone or Mobile Device. It’s a process we’ve been able to offer in the past, but never with such speed, ease and simplicity.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. Toll-free at (833) 219-1212 or by using our local at (905) 639-0909.
Inquiries can also be e-mailed to info@millenniumsignatures.com

#MarksmanMarkingSystems #MarksmanApp #MarkingSystems #MarkingTechnology #MillenniumSignatures #PartMarking #EngravingSystems
 #MarkingMethods #PermanentMarking #DotPeenMarking #PinMarking
 #JeffGuenther #PartMarkingSpecialists

MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

BALL SCREW vs PRECISION REINFORCED COG BELT Driven Dot Peen Marking Systems

Millennium Signatures “Marksman Series” Computerized Dot Peen Marking Systems is a comprehensive collection of equipment models, all offering their own unique features and abilities. 
Among their many differences, they can be quite easily divided simply into two (2) groups just by the drive technology they are equipped with. 
We have the Precision Reinforced Cog Belt Driven models and the slightly higher-end Ball Screw Driven models. While it’s true the Ball Screw Technology does have some advantages over the Reinforced Cog Belt Driven models, don’t fall into the thinking that the Reinforced Cog Belt Driven Systems are inferior or not worthy for those of you who believe strongly in buying a good product and doing things right the first time!
It is true that Ball Screw is a little more precise and does have better registration, repeatability long term, but the reality is they really only show an advantage in some situations. For example, if you are doing Machine-Readable Codes all the time on a regular production basis and your markings are not only required to be clean, sharp and precise to the naked eye, but also to today’s world of high definition scanning technology, then yes there would be an advantage to going to a Ball Screw Design for the very best possible code generation. Ball Screw is also beneficial when it comes to longer distances as in the X or Y-Axis travel of your Marking Head. Our Model MH-250 Marking Head which features a larger marking area of 250mm (9,84”) x 250mm (9.84”) is an example of where we use the Ball Screw Drive mechanism because it allows for us to maintain a tighter tolerance over a greater span. If we build custom Marking Heads for a customer that cover an even larger span, naturally we would continue to stay with the Ball Screw Drive. 
Ball Screw is also a little longer lasting, so should your machine be running around the clock or performing a very high number of cycles every hour ongoing then this might be a reason to invest in the slightly more expensive Ball Screw Driven Technology. Ball Screw Systems also yield some additional benefit when marking really small characters. The extra precision of these units will start to show when marking characters under 2.0mm in height with one of our precision marking tips such as the PH-16 or the LP-06. 
However, eight or nine of every ten Computerized Dot Peen Marking Systems sold are based on the Precision Reinforced Cog Belt Driven Technology and it is not to be underestimated. It is remarkable the character generation and repeatability these systems provide, year after year. They are also highly proficient at Barcodes such as 2D Matrix, UID and QR codes, it’s only recommended to upgrade if these markings are very high in volume. 
When demonstrating these systems, most clients will not even ask to see the Ball Screw Driven models as they feel it is not at all necessary. The marking is extremely clean and the codes read perfectly. The feedback we get from clients that have owned these systems for years, consistently indicates that they continue to perform like new. There is no noticeable deterioration and they are very happy with the reliable, maintenance-free experience they have had.
We have a lot of great Marking Systems for you to see. Regardless which Drive Design you feel is right for you, Marksman Systems are extremely well designed, easy to use and very well priced. 
Contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#MarkingSystemsCanada #MarkingSystemsUSA #MarkingTechnologies#EngravingSystems #EtchingSystems #LaserMarking #PartMarkingCanada#PartMarkingNorthAmerica #DotPeenMarking #AerospaceMarking#MarkingProducts #MarkingMethods #BallScrewMarkers #BeltDrivenModels#Marksman #MarksmanMarkingSystems 
#MillenniumSignatures #MilSigMarking

MARKING HEADS designed for universal mount and integration into Automated Production environments

Integrator Series Dot Peen Marking Heads
Marksman by Millennium Signatures offers an extensive range of durable universal mount marking heads ideal for integration in to Automated Production cells.

Millennium Signatures Marking Systems Inc., has been distributing and integrating Computerized Dot Peen Marking Systems since they were first introduced to the marketplace in 1987. There are three (3) principle configurations which this technology is common supplied, Stand-Alone Bench Top, Hand-Held Portable (Bluetooth) and Compact Universal Mount (Integrator Series) Marking Heads commonly used for integration into Automated Production Cells and Assembly Lines.

To focus on the Integrator Series models initially, these marking heads have many features including, Compact Side and Versatile Mounting Options, High Quality Protective Shielding, Compact Mini Controllers that also have external communication via RS-232, Serial, USB and Removable Read/Write SD Card. These systems are available in Precision Reinforced Cog Belt Driven designs or the Ultra Precise and Robust Ball Screw Design.

Our Pin Marking Head Technology is capable of marking upwards of 5 characters per second or more with perfect character generation, crisp clean marking even down as small as 0.040″ or 1.0mm. The repeat ability of these systems is extraordinary. They are very reliable and surprisingly cost effective. There are no real consumables, the Solid Tungsten Carbide tips are even very effective on hardened materials such as 62 Rockwell C and harder and go months or years without requiring replacement depending on your application and the volume of parts being processed.

These systems can be mounted in any orientation and have a long proven track record for being able to mark continuously in production environments with a very low rate of failure. The systems are also stand-alone if you wish for the ability to operate this equipment without the need for a computer or network connection.

All of our systems are capable of marking TEXT using different fonts, GRAPHICS, Linear and 2 Dimensional BAR CODES, Variable Text, Serial Numbers, Date & Shift Codes. These systems are well constructed, no castings, no plastics. Precision machined components engineered to last. Contact our Technical Sales Team for more information, literature, video footage, pricing or arrange an demonstration. You can reach our technicians directly at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

Marksman Rotary Marking System by Millennium Signatures Marking Systems Inc. (Flat / Circumferential Cylinder Marking Capable)

Markman Rotary Marking System
Marksman Rotary Marking System by Millennium Signatures. Perfect for switching back and forth between circumferential and flat marking applications.

DOT PEEN MARKING SYSTEMS

  • Classic Bench Top
  • Hand-Held Portable Models
  • Compact Universal Mount (Integrator Series)

Great equipment. Great Prices. Great Service. Great Support
Millennium Signatures Marking Systems Inc.
Burlington, ON / Buffalo, NY
Contact our Technical Sales Team at (905) 639-0909  or e-mail at info@millenniumsignatures.com

#Pinmarking #PinStamping #MillenniumSignatures #PartMarking #Traceability #2DBarcodes