TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

ENGRAVING SERVICES

Allow Millennium Signatures Marking Systems Inc., to assist you with your engraving needs. Millennium Signatures sells the Marking Equipment to end-users as well as assisting clients with various Marking Processes through our Custom Part Marking Services facility. We are equipped with many different technologies including Mechanical, Computerized Rotary Cut and Laser Engraving Technologies. We also have Galvo Driven Fibre and CO2 and Flatbed Flying Optic Technologies with Rotary Axis for doing Cylindrical or Circumferential Marking of Cylinders and other round products. We have a large array of the best equipment in the industry and expert operators and technicians in-house supported by a Graphic Design Department to ensure the highest quality output. We take in and process jobs daily Monday through Friday every week turning out the best results at great prices and with impressively fast turn-around times.
Call our Part Marking Specialists Toll Free at (833) 219-1212 or using our local at (905) 639-0909
You’re always welcome to send inquiries in via e-mail at info@millenniumsignatures.com

MARKING SYSTEMS & SERVICES

Think of Millennium Signatures Marking Systems first when the need to identify parts and product arises. Millennium Signatures is not only a supplier of the best Marking Systems the Marking Industry has to offer, but also provides highly efficient Custom Part Marking Services too. When it comes to any of the following products and services, call Millennium Signatures toll free at (833) 219-1212 or (905) 639-0909 and talk to our Part Marking Specialists about your application.
> Roll Marking
> Chemical Etching Equipment
> Laser Marking Systems
> Custom Engraved Stamps & Dies
> Computerized Dot Peen Marking
> Custom Etched Nameplates
> Engraving Services
> Laser Sintering
> Hand Stamps
> Marking Inks & Solvents
> Dry Ink Pads
> Rubber Stamps
> Mylar Stencils
> Benchtop Laser Marking
> Circumferential Marking
> Arc Marking
> Low Stress Marking
> Indent Stamping
> Deep Laser Engraving
> Etching Electrolytes & Neutralizer
> Steel Insert Type
> Segmented Steel Type
> Roll Dies
> Custom Part Marking Services

More CO2 Laser Marking and Cutting Capabilities…

Millennium Signatures Marking Systems Inc. is proud to announce that we have, once again, invested more money into new and dynamic equipment to support our Custom Part Marking Systems Division. We have added more CO2 Laser Marking and Cutting capability, thus allowing us to mark larger components and cut larger sheets of material. We have added Power Programmable Tool Posts to some of our Galvo Driven Fibre and CO2 Laser Systems allowing us to maintain even more control when doing high contrast Annealed Markings or Circumferential Marking specifically when it comes to repeatability. We have also redesigned our work stations to allow component parts to remain protected and flow even better through our systems for improved throughput. 
Millennium Signatures remains committed to offering g a very high level of service priding ourselves on the expertise we bring, the level of equipment we provide and pricing and speed at which we turn our parts around for our clients.

For more information on our Contract Marking also known as Custom Part Marking Services, please contact one of our Part Marking Specialists at Millennium Signatures Marking Systems by calling us toll-free at 
1-(833) 219-1212 or by e-mail at info@millenniumsignatures.com
Local # (905) 639-0909
Websites:
millenniumsignatures.com
marksmanmarkingsystems.com

#MarkingServices #ContractMarking #LaserMarking #PermanentMarking#LaserEngraving #PartMarkingServices #ContractMarking #MarkingProducts #MarkingTechnology #MarkingMethods#MillenniumSignatures
#JeffGuenther #MarkingSystemsCanada

We can Handle your Delicate Parts!

Even parts that need to be handled very delicately to avoid scratching or other forms of damage can be processed reliably by Millennium Signatures Custom Part Marking Division. Our operators are highly experienced and trained to follow customer instruction properly, unpacking and repacking parts such that they are ready to put in your customers hands. 
Special non-slip gloves are used to handle parts and protect the operators. Parts are unpackaged on special tables which protect sensitive surfaces and prevent parts from being dropped or accidentally knocked onto the floor. 
Fixtures and nesting apparatus are often made of Nylon or covered with Felt to protect the parts. We do all that we can to protect your parts and take the processing of your parts very seriously. Send your parts to our facility for marking and check one more thing off that bottomless to do list. 
Contact our Part Marking Specialists to learn more about how best to proceed. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millenniumsignatures.com

MKP-054, Now with MAGNETIC BASE!

MKP-054

Millennium Signatures is very excited about the performance and success of our MKP-054 Bluetooth Handheld Portable Marking System. 
We have a very effective adjustable Magnetic Base attachment now which has proven far more effective than competitive systems. It clamps down securely on your Steel Fabrications and secures very well while the Computerized Marking Head puts very clean, permanent identification into the metal exactly as per your layout program which is created and sent from a nearby Mini-Controller or even our Cell Phone App which sends all the information over instantly using Bluetooth Technology. 
We maintain this equipment in stock at our US and Canadian Facilities. 
Furthermore, we provide fast efficient response to your inquiries and the systems are fully supported with a great technical staff that we are very proud of. Give us a try!
Reach out to our Part Marking Specialists using the following methods
T: 905-639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com
millenniumsignatures.com

CUSTOM PART MARKING SERVICES

HISTORY

Millennium Signatures Marking Systems Inc. has an extensive history of selling and supporting Part Marking Technologies or Traceability Systems to the Manufacturing sector going back as far as 1972. Despite that its principal business is to sell, integrate and support the various methods of marking, we also have a very successful Custom Part Marking Division which has been servicing hundreds of clients for almost 15 years now. We have taken our extensive knowledge of Part Marking practices and our impressive range of equipment and made our services open to any clients who do not wish to invest in the technology for one reason or another or who wish to essentially get their products out onto the field and trial the marking results before committing to a process. There are many advantages to outsourcing your marking even if just initially. Let us do the hard work for you.

EXPERTISE

Those staffing the Millennium Signatures Custom Part Marking Division have extensive knowledge of how to work the various technologies and work to even the most rigid specifications. We can take on the marking of complex part configurations much more effectively that someone new to the process. Our pricing is very effective, and our turn-around times are said to be “excellent” based on feedback from our existing client base. Some of our clients bring their parts to us because they’re volumes are too low to justify an equipment purchase, others just don’t have the time or expertise. However, our Custom Part Marking Services provides another very valuable option for those considering buying their own equipment.

ADVANTAGES

If you send your parts to Millennium Signatures Marking Systems for processing, we will design proper fixturing that will positively locate and secure your part during the marking process. We will create layouts and programs allowing the chosen technology to execute the marking sequence properly and we will always provide First Article Samples or detailed photos to the client before proceeding with marking a batch of their parts. You can pay us to mark a single batch of your parts or you can bring us batches of parts for marking for years and years. When you’re ready to make a purchase, Millennium Signatures will not only outfit you with the proven hardware selection we use to process your parts, but we will bring our NEW equipment to your facility, install it and train your operators. The beautiful thing is that we will hand over all the fixtures, programs, layouts, stencils, artwork or any other production aids that we used to mark your parts, so you are now instantly in production. You will have absolutely everything you need to make the perfect impression from the time we walk out of your facility. Going about it in this way allows you to get the marking you need to be done (by professionals), it allows you to see and experience the results before committing to any significant cash outlay and there is never any expectation of an equipment purchase. However, if you do you will know you are selecting the right equipment for the job and you will be provided with absolutely EVERYTHING you need to get started.

PROCESSES

Our Custom Part Marking Services Division offers the following technologies which can be used to mark your parts, Electro-Chemical Etching, Engraving, Computerized Dot Peen Stamping, Ink Marking and both Fibre and CO2 Laser Marking. If you are not sure which technology is best for your application, contact our Part Marking Specialists at info@millenniumsignatures.com or by phone at (905) 639-0909 and have us evaluate your application properly and give you our recommendations.

RECOMMENDATIONS

It is strongly recommended that if you are having us process your parts for the first time, that you provide us with extra parts, scrap parts or spares. It is always best to have an actual part that we can set-up and test with before starting to run production on a good batch of parts. If a spare part is not available, it is quite possible we can still get you a perfect marking from the start, but a close second would be to get a sample piece of the very same material and surface condition as the actual parts we would be expected to mark.

If absolutely nothing is available, it is likely with our expertise that we can still get you a highly acceptable marking the first time, but it’s a much more challenging task for us and it may take longer or the first part or first few parts of that batch may be less than ideal before we manage to dial the settings in just right to secure a perfect marking for all the rest. There is no other alternative, however with all that we see on any given day our chances of getting a highly acceptable mark is much better than for most anyone else.

POLICIES

We often see hundreds and sometimes thousands of parts processed in our facilities each day. We have an unbelievable record for accuracy and acceptability among our clients, but things can happen for a multitude of reasons ranging from very confusing instructions from clients to inconsistencies in the product to hardware/software failures and on occasion even human error. We have created a process whereby we evaluate the client’s job, we review the materials sent. We prepare a sample and we either send the sample to the client for an approval (if time permits) or in most cases, we are asked to take good quality close-up images of the marking results and transmit them electronically to our clients for review and approval before proceeding onto multiple parts. If an error takes place that is deemed to be the fault of Millennium Signatures Marking Systems role in the processing of parts, Millennium Signatures limits its liability to the cost of remarking parts only. Millennium Signatures Marking Systems Inc. is to be in no way held responsible for the costs associated with removal of unwanted markings, recoating, reworking or replacement of customer supplied parts. There is simply too many variables and an extreme range of different products and circumstances for Millennium Signatures to take on such responsibility. Given, such circumstances, our team takes our responsibility very seriously and treats all customer supplied components with the highest levels of care and consideration.

PACKAGING & HANDLING

Please consider that we appreciate that expensive parts that are time-consuming to produce need to be protected and need to be transported carefully. Out of respect to our clients, we go through a series of procedures to ensure that our client supplied products are handled in such a manner that accidental dropping or scratching etc. is minimized if not eliminated. Our processes include handling the part as little as possible, working over anti-fatigue matting on floors and workbenches to cushion any unexpected impacts. We take the parts from any protective packaging, mark the part to specification and return immediately to the same packaged state they are received unless instructed in writing to do otherwise. Our fixturing is custom made on-site out of Plastics, Acrylics and Nylons to prevent scratching or scuffing of parts while being processed. We even wear gloves and can use a lint-free microfibre polishing cloths to clean up parts of any fingerprints if they are decorative parts such as chrome fixtures etc.

CUSTOM MARKING REQUESTS & INFORMATION

If you are thinking of having our Part Marking Specialists process some of your parts for you, please call us at (905) 639-0909 or send us an e-mail at info@millenniumsignatures.com. Allow us to answer your questions, quote on your requirements and discuss your special requirements. We see all kinds of unique requirements daily and we are confident we can accommodate yours.

 

CUSTOM CUT STENCILS – All Materials

There are many different industries that use our CUSTOM CUT STENCILS for one application or another and Millennium Signatures is a Fast and Cost-Effective source for all your stencilling needs. At Millennium Signatures we have the technology to create Custom Cut Stencils from a wide range of materials including, but not limited to Stainless Steel, Brass, Aluminum, Copper, Plastic, Mylar and Oilboard, custom to your specifications.
These stencils could be used for marking everything from Highway Construction Barriers, Shipping Crates, Overhead Pipe, Entrances and Exits, Apple Crates, Aircraft Components etc. If you need having a stencil created for a Marking Application including even Chemical Etching or VIN Etch Stencils, give us a call.
Millennium Signatures had been in the Marking Products business for over 30 years and we have invested in several technologies allowing us to provide this range of product and services to our customers.
Millennium Signatures has an in-house Artwork Department that makes creating these stencils to your specific requirements easy. Provide us with a concept of what you need and one of our Graphic Designers will create a DRAFT for your review. Once any changes that may be needed are made and the artwork is signed off, the stencils go into production and are cut from the size, shape, thickness and material type you request. 
If you have any questions, please contact our Technical Sales Team at our Buffalo NY, USA or Burlington ON, Canada facilities.
Call: (905) 639-0909
E-mail: info@millenniumsignatures.com
Website: www.millenniumsigntaures.com

#MillenniumSignaturesMarkingSystems #MillenniumSignatures #MarkingSystems #ComputerControlledMarking #LowStressMarking #ProductTraceability #SystemIntegrators #PartMarking #PartMarkingServices #LaserTechnology #MarkingSpecialists #PartTraceability #ProductCodes #ProductIdentification #PermanentMarking #ProductionMarkingEquipment #TYKMAElectrox #CustomCutStencils #MetalStencils #Stencils #OilboardStencils #CustomInksandSolvents #MarkingInks

MACHINE-READABLE CODES

Did you know that the Marksman Computerized Dot Peen Marking Technology from Millennium Signatures Marking Systems Inc. gives you the ability to mark your parts with 2D Barcodes, Military Spec UID Codes and QR Codes as well?

2 DIMENSIONAL CODES (2D)
Marking a 2D Code directly onto your part using our Computerized Dot Peen or Galvo Driven Laser Processes allows you to enter data such as work order #’s, Part #’s Lot #’s, Date Codes, pretty much any data at all into the system and have it automatically convert that data into square code that our equipment will allow you to permanently mark onto your parts. This code can be scanned using just about any of today’s readily available scanning technology and even very reliably with free apps, you can download for your smartphone cameras. This eliminates the concerns for labels coming off and potentially losing track of what revision of part you actually hold in your hand. It will always be there and easily accessible. It makes it very easy to track and inventory parts and can be very helpful in communicating with processes as they travel through automated production lines. For example, you can have parts scanned as they go through a process and rejected if parts should somehow become mixed or parts that are a fail can be marked to permanently confirm such important details.

UID CODES
UID Codes are a unique format of this 2Dimensional (2D Code) Technology that has been designed by the Military for their products and is often expected of manufacturers who are bidding to get such contracts that they will have the capability to mark the parts they would produce using this unique 2D Symbology.

QR CODES
QR Codes can be equally powerful, perhaps even more so in many ways. 
A QR Code is essentially a Hyperlink to a URL Address or File. For example, if you host your QR Code with Millennium Signatures or even through other sources, you can permanently print a small square code onto your part that will remain there long after any sticker, plate or other methods of marking would be lost due to any one of several variable elements of conditions. 
When scanning this code, it can immediately pull up a website or take you to a drawing or a document such as an entire manual potentially hundreds of pages of content if need be. There is really no limitations.
As long as that code is being hosted, the scanning of the code can instantly link anyone it’s a Barcode Scanner or Smartphone with a wealth of information about that part or product and it’s all controlled by you.
This information could even be changed after the mark is made potentially. Allow us to explain…..

POSSIBLE SCENARIOS
You build an assembly for Natural Gas Furnaces and there is some information such as exploded parts view, parts number listing and some installation and safety guidelines you always want available to your client. 
This means when it’s NEW out of the box of when being pulled out of a 20-year-old Furnace under repair. You completely control what information is instantly (almost magically) provides to your customer when scanned. 
However….. 4 years after production of this part, it is determined that there is a defect in the parts from manufacture or there is some reason to recall the parts. It is possible to redirect where the link that code represents a different destination or a REVISED or UPDATED destination or document. For example, a technician in the field could now remove this part and scan it with his cell phone only to learn immediately that there is a recall notice out on that part and instructions on what to do about it as a result. It is incredibly powerful if you know how to use it to its full potential.

Both Millennium Signatures Galvo Driven Laser Etching / Engraving Technologies and our Marksman Series Computerized Dot Peen (Impact Stamping) process’ can provide such markings. The beautiful thing about these Codes is not only are they so easy to create and apply to the part, they are also very permanent. If you pull a dirty, greasy part of a piece of equipment, just give it a wipe off or a scuff with a Scotch Brite Abrasive Pad or something similar and give it a scan. It’s permanently on the surface of the metal, plastic, porcelain or almost any material and will almost always produce for you when needed.

For more information on these Marking Technologies and the Systems we sell allowing you to put these markings on your parts, contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
We have facilities in Buffalo NY, USA and Burlington ON, Canada and we are currently in the process of establishing facilities in Mexico.

Main line for inquiries
Tel: (905) 639-0909

E-mail Inquiries:
info@millenniumsignatures.com

Head Office Hours:
Monday through Friday
8:30am – 4:30pm (Eastern Standard Time)

#2DCodes #QRCodes #UIDCodes #CodeMarking#BarCodeScanning #2DCodeMarking#MarkingMethods
#MarkingProducts #JeffGuenther
#MarkingTechnology #Marksman
#TYKMAElectrox #GalvoLasers #DotPeenMarking#PermanentMarking #QRCodeMarking#MillenniumSignatures #Etching#PartMarkingServices #Engraving #PartTraceability#PartIdentification
#MetalMarking

CUSTOM PART MARKING SERVICES

Have you ever considered outsourcing your part marking? What if you could get you parts turned around very quickly and marked to specification by Part Marking Specialists using the corresponding process/technology with a fixed cost per part?
It’s completely possible and is part of the everyday activity at Millennium Signatures Marking Systems Inc.
We have hundreds of clients who sent in both simple and very challenging part marking requirements from all over North America who just want their parts done right, using the best technology and love our service.
We can process a couple parts or we can process thousands of parts. There is no job too big or too small. 
We can do Rotary Application work (Circumferential Marking) we can accommodate almost any material. We are very accustomed to working with Aerospace, Nuclear and Military Marking Specifications. Contact our Part Marking Specialists today via our general inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com