TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

SCAN YOUR WORK ORDER

MARK YOUR PART. THAT SIMPLE!

We have now made it easier using our Marksman Series Dot Peen Marking Systems to scan a Barcode on a Work Order or Traveller and print the Human Readable data within that code directly onto your part using our App for your Smart Phone or Mobile Device. It’s a process we’ve been able to offer in the past, but never with such speed, ease and simplicity.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. Toll-free at (833) 219-1212 or by using our local at (905) 639-0909.
Inquiries can also be e-mailed to info@millenniumsignatures.com

#MarksmanMarkingSystems #MarksmanApp #MarkingSystems #MarkingTechnology #MillenniumSignatures #PartMarking #EngravingSystems
 #MarkingMethods #PermanentMarking #DotPeenMarking #PinMarking
 #JeffGuenther #PartMarkingSpecialists

COMBINATION MARKERS…..

Are the most popular thing to come along in some time now! We maintain a huge inventory cause they sell quickly. The Battery Powered, Blue Tooth Portability Features of our MK-054p and MK-054k models is proven success story in portable marking, but when you pair it with our T-300 Base & Adjustable Column, your portable marker quickly becomes a solid Bench Top solution ideal for marking small components, Metal Nameplates and more…
These systems are available with built-in keyboard or detachable mini keyboard and all allow information to be sent over from a computer or our Free App that you can download to your smart phone or tablet. Existing users are loving the ease of the App and say tracking fabricated assemblies or raw materials entering their manufacturing process has never been easier.

For more information on our Marksman Series Marking Systems, contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Toll Free from anywhere in North America at (833) 219-1212 or using our Local at (905) 639-0909
E-mail our team day or night at info@millenniumsignatures.com
We look forward to reviewing your application with you.

#Marksman #PermanentMarking #StampingEquipment #ComputerizedStamping #PartMarking #EngravingSolutions
#ContractMarkingServices
#PartMarkingSpecialists
#AerospacePartMarking

MKP-054K PORTABLE MARKING

WESTEC 2019
We are at the Westec 2019 Trade Exhibition in beautiful Long Beach California with our Marksman Series Dot Peen Marking Systems
One of the newer items being presented at this show is our MKP-054K Battery Operated Hand-Held Portable Marker complete with built-in Keyboard, Bluetooth communications with a PC or any mobile device using our Free Apps designed for use with IOS and Android-based products.
These systems are durable, lightweight, easy to work with.
Contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Toll Free: 1-(833) 219-1212
Local: (905) 639-0909

WESTEC 2019

Millennium Signatures Marking Systems is exhibiting at this weeks Westec 2019 Trade Exhibition in beautiful Long Beach California.
We are presenting our Marksman Series Computerized Dot Peen Marking & Scribing Equipment.
We are located at booth 850 of the main hall.
Stop by to see us between 10:00am and 5:00pm today and tomorrow and 10:00am and 4:00pm on Thursday.

For more information, contact us at 1-833-219-1212 and speak with one of our Part Marking Specialists.

#MillenniumSignatures
#Marksman #PartMarking #PermanentMarking #MarkingServices #MarkingProducts #MarkingSystems #DotPeenMarking #Etching #Scribing #Stamping #MarkingMethods

MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

NEW!


Marksman by Millennium Signatures Marking Systems Inc. continues to offer versatility and choice with a dynamic range of equipment. Our MKP-054 Portable Blue Tooth Hand-Held Battery Powered Marking Systems have been a huge success for years, now we’ve integrated a keyboard into the Hand-Held Unit allowing quick editing to be done right there on the unit regardless where you are. You can be up on a large fabricated structure or across the shop floor. 
Our systems have always used Bluetooth Technology to transfer static and variable information to the marking seamlessly from a Laptop Computer, Cell Phone or Tablet using our free App designed for Android or IOS Operating Systems, but now you have the choice to purchase this same equipment with the addition of a built-in keyboard. Marksman remains committed to supplying well built Marking Equipment designed to handle challenging manufacturing environments. 
For more information on this Computerized Part Marking Technology, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

EASTEC 2019

Just 12 days until Eastec 2019!

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures will be presenting their entire Marksman Product Line at the show. As Part Marking Specialists with nearly 50 Years experience in the Part Marking & Traceability Business, we will be focusing on our Computerized Dot Peen Marking Technology. 
Dot Peen Marking or Pin Marking, Stylus Marking, Needle Marking, CNC Computerized Stamping or whatever name you’ve come to know it as is by far one of the most popular methods of putting permanent Traceability on your Metal or Plastic products. 
Using a very precise Ball Screw and Guide Bearing Design we move a Tungsten Metal Stylus around within a Marking Area allowing us to rapidly fire a solenoid and indent stamp patterns into the various materials with great speed, accuracy and repeatability. These machines can even leave beautiful clear, professional looking identification on Hardened Metals upwards on 64 Rockwell in the C Scale and beyond. 
These systems are packed with features which include Auto-Serialization Capability, Date Coding, 2D Barcodes, QR Codes, UID Codes, Text in Various Fonts, PLT File Images, Arc or (Radial) Marking, Circumferential Marking on Cylinders and more! 
These systems are robustly built and perform reliably in a variety of conditions, they are rich with features and capability and are readily available at a very cost-effective price point. Systems can range in price between $4,000.00 and $10,000.00 depending on the configuration needed. 
Easy to use, easy to integrate these systems are a perfect fit for most manufacturing operations. 
They’re available in Benchtop Configurations, Compact Integrator Series Configurations, Hand-Held Portable Configurations, Combination Hand-Held Portable / Benchtop Configurations and our very unique Positive Locating Slide Design with Heavy Duty Rotary Axis for Circumferential (Cylinder) Marking. 
Marksman covers all the bases and is a leader for price and durability. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems For more information. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

FREE PICK-UP & DELIVERY

Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:

  • Stoney Creek
  • Hamilton
  • Brantford
  • Ancaster
  • Dundas
  • Flamborough
  • Waterdown
  • Burlington
  • Oakville
  • Milton

Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers. 
Millennium Signatures can make it easy! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
#MarkingDevices
#MarkingSystems

 

CONTRACT MARKING SERVICES

Our team goes to great effort to review our customer’s instructions in great detail and always get a First Article Photo approved before processing to give our customers EXACTLY what they want on their parts. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems if you are looking to purchase Marking Technology for your shop or need to have parts processed for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com