MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

MARKSMAN SERIES LARGE FIELD ROTARY MARKER (EASTEC 2019)

Marksman’s Dynamic Large Field Rotary Marker will be on display at this year’s Eastec Exhibition in West Springfield Massachusetts next week (May 14,15 and 16 of 2019)

This unique system offers a Large 250mm x 250mm Marking Area making it super versatile for large components, multiple component marking and populating variable data on Metal Nameplates. This system is equipped with our Extended Height T-500-H Heavy Duty Manual Adjustable Z-Axis Tool Post which securely supports the large Marking Head Format while offering additional height allowing taller components to be marked.

As with previous generations of our Rotary Models, this equipment is equipped with a very heavy duty Precision Rotary Drive and 3-Jaw Chuck or Collet Assembly. 

Standard models can accommodate a 6.0” (15.24cm) diameters component. We can also modify this machine to accommodate larger diameters as needed. This system is a Ball Screw Driven Design which boasts the highest level of accuracy and repeatability available. It offers marking speeds of up to 5 characters per second (2.5mm) and is highly efficient at marking text of various fonts, mirror image characters, vector images (logos), 2D Barcodes, QR Codes, 2D Matrix and UID Code Technology. These systems are very robust with no cast components. All Precision machines components go into this very unique Marking System. 

The most valuable feature of this machine in our opinion is the Positive Locating Rotary Axis Slide Feature. This prevents you from having to manually set-up and align the rotary System to your Marking Head each time. The rotary axis stays aligned and can slide in to use and lock in place in one (1) second. 

If you need to use the system to mark a Nameplate or a flat component, unlock your rotary Axis, slide it out from under the marking head, pull up your new program and you’re Marking Flat stock. Do the same two steps again and you’re back marking Round stock. It’s that easy!

Contact one of the Part Marking Specialists at Millennium Signatures Marking Systems Inc., to learn more out the MK-200BN/250 complete with CDC-20 Rotary and all of its capabilities. 

T: (905) 639-0909

E: info@millenniumsignatures.com

W: marksmanmarkingsystems.com

or millenniumsignatures.com

#RotaryMarking

#CircumferentialMarking #CylinderMarking #DotPeenMarking#MarksmanRotary #PinMarking #ComputerizedMarking #Eastec2019#MillenniumSignatures #MarkingProducts #MarkingSystems#ProductTraceability #PermanentMarking

EASTEC 2019

Just 12 days until Eastec 2019!

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures will be presenting their entire Marksman Product Line at the show. As Part Marking Specialists with nearly 50 Years experience in the Part Marking & Traceability Business, we will be focusing on our Computerized Dot Peen Marking Technology. 
Dot Peen Marking or Pin Marking, Stylus Marking, Needle Marking, CNC Computerized Stamping or whatever name you’ve come to know it as is by far one of the most popular methods of putting permanent Traceability on your Metal or Plastic products. 
Using a very precise Ball Screw and Guide Bearing Design we move a Tungsten Metal Stylus around within a Marking Area allowing us to rapidly fire a solenoid and indent stamp patterns into the various materials with great speed, accuracy and repeatability. These machines can even leave beautiful clear, professional looking identification on Hardened Metals upwards on 64 Rockwell in the C Scale and beyond. 
These systems are packed with features which include Auto-Serialization Capability, Date Coding, 2D Barcodes, QR Codes, UID Codes, Text in Various Fonts, PLT File Images, Arc or (Radial) Marking, Circumferential Marking on Cylinders and more! 
These systems are robustly built and perform reliably in a variety of conditions, they are rich with features and capability and are readily available at a very cost-effective price point. Systems can range in price between $4,000.00 and $10,000.00 depending on the configuration needed. 
Easy to use, easy to integrate these systems are a perfect fit for most manufacturing operations. 
They’re available in Benchtop Configurations, Compact Integrator Series Configurations, Hand-Held Portable Configurations, Combination Hand-Held Portable / Benchtop Configurations and our very unique Positive Locating Slide Design with Heavy Duty Rotary Axis for Circumferential (Cylinder) Marking. 
Marksman covers all the bases and is a leader for price and durability. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems For more information. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

COMBINATION MARKING

When using a Hand Held Portable Marker to stamp identification onto your parts, it’s easy when it comes to larger, heavier parts or assemblies and nothing could be better given the computerized solution that offers cord-free portability and comfort. However, it could be challenging or impossible to mark small components should the need arise. 
For this reason, Millennium Signatures introduces our Combination Marker Set-up. Combining our T-300 Base & Column used for some of our Bench Top configurations with our very popular MKP-054 Blue Tooth Enabled Battery Powered Hand-Held Marking Head now allows you to effectively holster that Portable Marking Capability quickly into a Bench Top Marker configuration making it very easy to mark small tools, couplings, valves or almost any small metal or plastic components that would have been hard to do with a portable previously. It also makes it useful for marking small Nameplates with great precision. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. To learn more about how to get more out of your Marksman Hand-Held Portable Marking System. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

EASTEC 2019

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience.
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

A FRESH NEW LOOK!

There is so much going on at Millennium Signatures Marking Systems Inc. We are one of North America’s most comprehensive sources for Part Marking / Traceability Equipment, Marking Accessories and Supplies.

With two (2) modern facilities, one located in Burlington, Ontario supporting Canada from coast to coast and another in Buffalo NY, servicing the continental United States of America and Mexico, we field inquiries, service and ship products to companies throughout North America and various regions around the world every day. 
Our Part Marking Specialists can assist you with various methods of marking your products, including but not limited to the following: Steel Handstamps, Custom Engraved Steel Dies, Inserts, Type Holders and Roll Marking Dies to Custom Auto-Indexing Numbering Heads. We also Specialize in Electro-Chemical Etching (Chem-Etch) and always have lots of fresh Electrolytes, Neutralizers, Accessories plus Full Marking Kits in stock at all times.

Among our most popular products is our Marksman Series line of Computerized Dot Peen Marking Systems (Dot Peen / Pin Marking) Equipment. We also proudly sell, full service and support TYKMA Electrox built Galvo Driven Laser Marking Technology. It is the best of the best and we have incredible success with this dynamic range of products.

Custom Inks & Solvents, including approved Aerospace & Nuclear Grade Inks, Solvents and Polyurethane Top Coat Products.

As if that’s not enough, Millennium Signatures also prepares a range of different types of Stencils including Fabric Stencil used for the Etching Process, Custom Cut Mylar and Metal Stencils as used for a range of stencilling applications for everything from Metal Fabrications to Concrete Products and Construction uses.

One of our most unique offerings is our very effective Custom Part Marking Services Division. This is where we blend our 50+ years of experience together with the most State-of-the-Art Marking Technology available and equipment with great Customer Service Personel and a talented group in Artwork & Design department and we mark your parts for you. Anything from prototypes to large batches of product. We work daily with Aerospace & Nuclear Specifications and we communicate effectively using very modern photography equipment and optics to show you the marking results you will get throughout before we mark a single production piece. Today, one thing is for sure, everyone is in a rush and so we have designed and built an effective service that makes it possible for us to meet or exceed even the most demanding expectations we face. We have thought of everything when it comes to handling your parts! Contact our Part Marking Specialists and give us a try. We are proud of the scope and quality of work we deliver on day-in and day-out. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and check out our Marksman Series products on their own dedicated site by visiting: marksmanmarkingsystems.com

#MarkingSystemsCanada #MarkingSystemsUSA#MarkingEquipmentOntario
#MarkingProductsUSA #PartMarkingCAN #MarkingServicesBurlington#MarkingProductsBuffalo #EtchingProductsNY #CanadaMarkingSolutions#ProductTraceability #EngravingServicesOntario #SteelStampsOntario#StencilsUSA #MarksmanUSA #MilSigMarking #MarksmanCanada #LaserGearCanada

73XNW MARKING INKS

Do you process Aerospace Components which require 73XNW Marking Inks & Solvents? Polyurethane Protective Top Coat Products Perhaps?

PART MARKING SYSTEMS & SERVICES, it’s what we do!

Working to Spec. is Something we do ALL DAY, EVERY DAY

Our customers provide us with all the unique specifics they are expected to follow when marking their customer’s parts and send them to us to make it happen. We understand the importance of “Low Stress” Marking and how it’s often necessary to meet or not exceed a certain marking depth for example. You can trust Millennium Signatures to review your specification thoroughly and consult with you before marking your parts. You can take comfort knowing that we can work from your drawings. 
We can produce a “First Article” for your review or we can use good high-quality Digital Macro Photography to take a series of photos of the First Article Component for inspection sent electronically by e-mail. We don’t start marking your parts until you’ve signed off confirming you like the results we’ve achieved. For almost 50 years, we’ve spent every day helping people get the best marking possible on their parts!
We have several clients that fly batches of parts halfway around the world to make sure their challenging requirement are marked properly. 
Contact our Part Marking Specialists to discuss why allowing our Custom Part Marking Division to mark some of your parts for you might be highly beneficial especially if you’re in the market to purchase equipment for your own in-house processing. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com
or marksmanmarkingsystems.com

CUSTOM CUT STENCILS – All Materials

There are many different industries that use our CUSTOM CUT STENCILS for one application or another and Millennium Signatures is a Fast and Cost-Effective source for all your stencilling needs. At Millennium Signatures we have the technology to create Custom Cut Stencils from a wide range of materials including, but not limited to Stainless Steel, Brass, Aluminum, Copper, Plastic, Mylar and Oilboard, custom to your specifications.
These stencils could be used for marking everything from Highway Construction Barriers, Shipping Crates, Overhead Pipe, Entrances and Exits, Apple Crates, Aircraft Components etc. If you need having a stencil created for a Marking Application including even Chemical Etching or VIN Etch Stencils, give us a call.
Millennium Signatures had been in the Marking Products business for over 30 years and we have invested in several technologies allowing us to provide this range of product and services to our customers.
Millennium Signatures has an in-house Artwork Department that makes creating these stencils to your specific requirements easy. Provide us with a concept of what you need and one of our Graphic Designers will create a DRAFT for your review. Once any changes that may be needed are made and the artwork is signed off, the stencils go into production and are cut from the size, shape, thickness and material type you request. 
If you have any questions, please contact our Technical Sales Team at our Buffalo NY, USA or Burlington ON, Canada facilities.
Call: (905) 639-0909
E-mail: info@millenniumsignatures.com
Website: www.millenniumsigntaures.com

#MillenniumSignaturesMarkingSystems #MillenniumSignatures #MarkingSystems #ComputerControlledMarking #LowStressMarking #ProductTraceability #SystemIntegrators #PartMarking #PartMarkingServices #LaserTechnology #MarkingSpecialists #PartTraceability #ProductCodes #ProductIdentification #PermanentMarking #ProductionMarkingEquipment #TYKMAElectrox #CustomCutStencils #MetalStencils #Stencils #OilboardStencils #CustomInksandSolvents #MarkingInks