Our SCORPION SERIES Laser Marking Systems can be integrated into a variety of Class I Workstations or as a Class IV Integration Laser. The Scorpion Series Lasers are available in 20, 50 and 70 Watt configurations and some models, models including our 20-Watt and 70-Watt are available in our ZEP format which offers a Variable (36) Waveform capability which is determined through a very simple entry in the software.
These are very proven, hard-working lasers ideal for all industrial product identification applications.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn more about any of our Galvo Driven Performance Laser Marking Systems.
T: (905) 639-0909
Pictured here: The 50-Watt Scorpion with Dual Waveform Capability mounted on a Very Precision, Power Programmable Z-Axis Tool Post c/w Aluminum T-Slot Base Plate. Precision Tooling Plates as a base also available.
This laser is shown with the 163mm F-Theta Flat Field Lens option offering a standard marking field of approximately 4”x 4” or 100mm x 100mm, but larger Marking Field options are also available.
Excellent System for integration into assembly lines and automated work cells. These lasers are set-up with plenty of I/O to communicate with Robots, Vision Systems, Motion Control Equipment and more.
Millennium Signatures has High Powered Galvo Driven Fibre Lasers that will assist you with getting the Markings you need on your products. If you have a deep marking requirement, no problem!
Contact our Part Marking Specialists about our Custom Part Marking Services Division and what we can do for you.
Tel: (905) 639-0909
Millennium Signatures is pleased to announce that we are now equipped with even more state-of-the-art laser equipment allowing us to demonstrate the capabilities of our Galvo Driven Laser Marking Systems to those visiting our facility. Our Canadian Facility located in Burlington, Ontario is now equipped with a 20-Watt Minilase Manual Bench Top System (Class I Configuration), a 20-Watt Scorpion Rapide II ZEP Multi-waveform Z-Mode Laser (Class IV Configuration) and most recently the 50-Watt Scorpion Laser (Class IV Configuration). We have acquired this laser complete with a 160mm, 254mm and 350mm multi-element Flat Field Lens Assemblies to be able to demonstrate a wider range of capabilities and enhance the range of our Application Testing Services. The 50-Watt Laser will be capable of delivering the same ultra high quality marking we are known for with shorter cycle times and deeper marking results if required. Millennium Signatures is always investing in NEW equipment and the capability to service our clients with better efficiency.
To arrange a visit to see demonstrations of any of our Marking Technologies demonstrated, please be sure to contact our Technical Sales Team at T: (905) 639-0909
THE MINILASE SERIES available from Millennium Signatures Marking Systems Inc.
An incredible solution or companies that have been wanting to have their own Galvo Driven Laser Marking capability in-house. The Minilase Series offers an easy solution because it’s the whole package is a very clean simple offering. It’s not complicated, the Minilase machines are nice and compact bench top designs that are very well constructed extremely SAFE and EASY to use. These systems are designed to meet CDRH Class I specifications. They are all state-of-the-art Galvanometer based systems that provide incredible power density at its focal point and delivers lightening fast, razor sharp imaging as good or better than you will find on any Galvo Driven design anywhere. Leaps and bounds more efficient and more precise than Flat Bed Flying Optic based technology. Minilase is a favorite of many because it just makes buying a Fibre Marking Laser simple. All systems are easily portable. They all regular standard 110-Volt power and they are all air-cooled. It’s truly the best value you will find for the money. If you’re looking to do it right, you want to purchase a Minilase!
If you should be faced with larger, heavier parts or configurations that require multiple axis material handling capability, there are our other products such as the Zetalase Series, or our Customizable Integration Series Lasers known as “The Scorpion Series” and/or “The Vereo Series”. All of these laser systems are built right here in the United States of America 🇺🇸 in a brand-new 100,000 sq.ft. TYKMA Electrox facility in Chillicothe Ohio.
Millennium Signatures Marking Systems Inc has partnered with TYKMA Electrox in the capacity of Exclusive Canadian Distribution, Field Service and support because we have over 27 years in the Laser Marking business and we wanted only the highest quality systems and from a highly organized, local operation with great communication and giving us easy access to product. TYKMA Electrox is very aggressive with leading the industry with new innovation and we are proud of the products they build. It is our pleasure to be able to bring these laser products to the Canadian Marketplace and provide full sales support, application testing and demonstration capabilities as well as highly trained technicians that can provide fast and effective fully outfitted on-site support if needed in the future.
We have an inventory of product and replacement parts in stock at all times.
GALVO LASER MARKING TECHNOLOGY, by Millennium Signatures Marking Systems Inc.
Millennium Signatures is proud to supply, integrate and fully support the Scorpion Fibre Laser Marking Series.
These systems are available in 10-Watt, 20-Watt, 50-Watt and 100-Watt configurations as well as the 20-Watt and 70-Watt ZEP extended performance Z-mode Lasers offering 36 waveforms by special order. This 110-Volt, Air-Cooled, Generation of Laser Marking Series has been highly successful for Millennium Signatures Marking Systems since coming to market in 2008 / 2009. They install easily, the are extremely reliable and the performance and capabilities of these system are state-of-the-art. These systems can be supplied as a Class IV Laser or integrated into any of our various protective workstations such as the EMS-400, creating a CDRH Class I Marking System. These lasers can be easily outfitted with F-Theta Flat Field Marking Lens that include 100mm, 163mm, 254mm, 350mm and 410mm Effective Focal Length (EFT) Lens. This essentially mean that we can provide systems with marking areas ranging from approximately 2.5″ square to nearly 16″ square at the part marking surface.
These systems have proven highly effective at marking a huge range of sub-straights including almost all metals, plastics, ceramics, and a wide range of unique coatings and synthetic materials. Millennium Signatures is equipped with an in-house applications lab which can not only demonstrate the capabilities of this magnificent marking technology, but we can confirm exactly what type of marking results and cycle times you can expect from this equipment on your exact product. These lasers are compact and very versatile allowing them to be easily integrated into automated cells and assembly lines.
Contact our Technical Sales Team for more information on what our Scorpion Marking Lasers can do for your manufacturing operation.
Millennium Signatures Marking Systems Inc., is the exclusive Canadian Distribution and Technical Field Support Team for TYKMA Electrox in Canada. Millennium Signatures supplies both the Scorpion Series Lasers as well as the Vereo Series Integration Lasers. This diverse range of Galvo Driven Laser Marking Technology can be used within a number of our standard Class I Marking Enclosures as a completely contained system or used as part of a custom integration into an Assembly Line or as part of an Automated Production Cell. These Lasers are offered in a range of power outputs including: 10-Watt, 20-Watt, 50-Watt, 70-Watt and 100-Watt in the Yttrium Fibre configuration. We also offer a 30-Watt Galvo Driven CO2 Laser called the Razor.
We offer presently offer two (2) different Software Platforms known as ” Scriba” and “Minilase Pro SE” which are both packed with capability, but different and appeal to different users. The Minilase Pro SE software is the platform used with the Vereo and Minilase system designs and the Scriba software is the platform used to drive Scorpion Series systems.
If you are looking for a complete CDRH Class I solution, we have a very capable range of systems available from our smaller Minilase Bench Top Systems to our Minilase XL and Zetalase models. For larger, heavier part processing we have the EMS Series Systems which are multi-axis system designs which easily accommodate Lasers of all sizes.
In addition to being able to accommodate larger parts, the EMS-400 and the Zetalase XL systems offer much larger marking fields including 200mm x 200mm without and programmables stages or other manipulation of the part.
For more information on these systems as well as a lot of customized hardware and software solutions we can offer, contact our Technical Sales Team at 905-639-0909 or by e-mail at email@example.com