CUSTOM PART MARKING SERVICES Division of Millennium Signatures Marking Systems Inc.

Specialists in all forms of Product Identification and Traceability.

Contact our Part Marking Specialists at (833) 219-1212 for more information on how we can get you the right technology in your hands or use our 30+ Years of knowledge to mark your products for you.

WESTEC 2019

Millennium Signatures Marking Systems is exhibiting at this weeks Westec 2019 Trade Exhibition in beautiful Long Beach California.
We are presenting our Marksman Series Computerized Dot Peen Marking & Scribing Equipment.
We are located at booth 850 of the main hall.
Stop by to see us between 10:00am and 5:00pm today and tomorrow and 10:00am and 4:00pm on Thursday.

For more information, contact us at 1-833-219-1212 and speak with one of our Part Marking Specialists.

#MillenniumSignatures
#Marksman #PartMarking #PermanentMarking #MarkingServices #MarkingProducts #MarkingSystems #DotPeenMarking #Etching #Scribing #Stamping #MarkingMethods

NEW!


Marksman by Millennium Signatures Marking Systems Inc. continues to offer versatility and choice with a dynamic range of equipment. Our MKP-054 Portable Blue Tooth Hand-Held Battery Powered Marking Systems have been a huge success for years, now we’ve integrated a keyboard into the Hand-Held Unit allowing quick editing to be done right there on the unit regardless where you are. You can be up on a large fabricated structure or across the shop floor. 
Our systems have always used Bluetooth Technology to transfer static and variable information to the marking seamlessly from a Laptop Computer, Cell Phone or Tablet using our free App designed for Android or IOS Operating Systems, but now you have the choice to purchase this same equipment with the addition of a built-in keyboard. Marksman remains committed to supplying well built Marking Equipment designed to handle challenging manufacturing environments. 
For more information on this Computerized Part Marking Technology, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

EASTEC 2019

Just 12 days until Eastec 2019!

 We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures will be presenting their entire Marksman Product Line at the show. As Part Marking Specialists with nearly 50 Years experience in the Part Marking & Traceability Business, we will be focusing on our Computerized Dot Peen Marking Technology. 
Dot Peen Marking or Pin Marking, Stylus Marking, Needle Marking, CNC Computerized Stamping or whatever name you’ve come to know it as is by far one of the most popular methods of putting permanent Traceability on your Metal or Plastic products. 
Using a very precise Ball Screw and Guide Bearing Design we move a Tungsten Metal Stylus around within a Marking Area allowing us to rapidly fire a solenoid and indent stamp patterns into the various materials with great speed, accuracy and repeatability. These machines can even leave beautiful clear, professional looking identification on Hardened Metals upwards on 64 Rockwell in the C Scale and beyond. 
These systems are packed with features which include Auto-Serialization Capability, Date Coding, 2D Barcodes, QR Codes, UID Codes, Text in Various Fonts, PLT File Images, Arc or (Radial) Marking, Circumferential Marking on Cylinders and more! 
These systems are robustly built and perform reliably in a variety of conditions, they are rich with features and capability and are readily available at a very cost-effective price point. Systems can range in price between $4,000.00 and $10,000.00 depending on the configuration needed. 
Easy to use, easy to integrate these systems are a perfect fit for most manufacturing operations. 
They’re available in Benchtop Configurations, Compact Integrator Series Configurations, Hand-Held Portable Configurations, Combination Hand-Held Portable / Benchtop Configurations and our very unique Positive Locating Slide Design with Heavy Duty Rotary Axis for Circumferential (Cylinder) Marking. 
Marksman covers all the bases and is a leader for price and durability. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems For more information. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

We can Handle your Delicate Parts!

Even parts that need to be handled very delicately to avoid scratching or other forms of damage can be processed reliably by Millennium Signatures Custom Part Marking Division. Our operators are highly experienced and trained to follow customer instruction properly, unpacking and repacking parts such that they are ready to put in your customers hands. 
Special non-slip gloves are used to handle parts and protect the operators. Parts are unpackaged on special tables which protect sensitive surfaces and prevent parts from being dropped or accidentally knocked onto the floor. 
Fixtures and nesting apparatus are often made of Nylon or covered with Felt to protect the parts. We do all that we can to protect your parts and take the processing of your parts very seriously. Send your parts to our facility for marking and check one more thing off that bottomless to do list. 
Contact our Part Marking Specialists to learn more about how best to proceed. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: Millenniumsignatures.com

WAIT!

We really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks

NEW Galvo Driven Laser Marking System!


New Galvo Driven Laser Marking System for 2018

Do you have a Class I Galvo Driven Laser Marking System and an operator who stands idle in front of the machine for anywhere from 30 seconds per part to potentially a few minutes for every batch of parts loaded into the Laser Marker? If you have high volumes of product to Laser Mark, this time spent idle can greatly increase the overall time needed to process the parts you need. 
Consider the freshly redesigned Galvo Driven (Class I) Rotary Dial Index Laser Marking System for 2018 by TYKMA Electrox supplied by Millennium Signatures Marking Systems Inc.
This system is designed for additional efficiency over conventional Box Marking Enclosures with Manual or Automatic Door Systems.
These systems have a robust rotary table that is set-up to rotate 180 Degrees upon command at the end of each “marking cycle”. This allows an operator to be unloading parts that have just been marked and reload the fixture with fresh new parts at the very same time as the parts previously fixtured on the other half of the table are actively being marked. Once the cycle is complete and fresh (unmarked) product has been loaded there is a touch activation process that requires both hands to rotate the new parts in for processing at the same time as finished parts are presented back to the operator for unloading.
It’s a safe process, the Laser System is designed to provide Class I protection with a KG-3 Protective Viewing Window and integrates light curtains that will instantly stop the system in its tracks should the light curtain be interrupted or obstructed why the table is rotating.
It’s a much faster, more efficient process for applications that have high volumes of the same parts to be marked.
For more information on this system and various other system designs, contact our Technical Sales Team at Tel: (905) 639-0909 or by e-mail at info@millenniumsignatures.com. 
We are the Part Marking Specialists.

LASER MARKING
ELECTRO-CHEMICAL ETCHING
DOT PEEN MARKING SYSTEMS
CUSTOM NAMEPLATES
VIBRO-ETCH MARKING PENS
CUSTOM MARKING INKS
CUSTOM PART MARKING SERVICES

State-of-the-art laser equipment: GALVO DRIVEN LASER MARKING SYSTEMS

Millennium Signatures is pleased to announce that we are now equipped with even more state-of-the-art laser equipment allowing us to demonstrate the capabilities of our Galvo Driven Laser Marking Systems to those visiting our facility. Our Canadian Facility located in Burlington, Ontario is now equipped with a 20-Watt Minilase Manual Bench Top System (Class I Configuration), a 20-Watt Scorpion Rapide II ZEP Multi-waveform Z-Mode Laser (Class IV Configuration) and most recently the 50-Watt Scorpion Laser (Class IV Configuration). We have acquired this laser complete with a 160mm, 254mm and 350mm multi-element Flat Field Lens Assemblies to be able to demonstrate a wider range of capabilities and enhance the range of our Application Testing Services. The 50-Watt Laser will be capable of delivering the same ultra high quality marking we are known for with shorter cycle times and deeper marking results if required. Millennium Signatures is always investing in NEW equipment and the capability to service our clients with better efficiency.

To arrange a visit to see demonstrations of any of our Marking Technologies demonstrated, please be sure to contact our Technical Sales Team at
T: (905) 639-0909
E: info@millenniumsignatures.com

BENCH TOP SERIES MARKERS!

Millennium Signatures Marking Systems Inc., of Buffalo NY USA  and Burlington ON Canada  is the Head Sales and Technical Support operations for the Marksman Series Computerized Dot Peen Marking Systems throughout Canada, The United States and Mexico. We maintain a huge inventory of all three system configurations including our Bench Top, Hand-Held Portable and Compact Universal Mount (Integrator Series) Marking Heads and Mini-Controllers. We have a large inventory of all replacement parts and a great temporary swap out program for this situations when being down is NOT an option!
Dot Peen Marking or Pin Marking as it’s often referred to is one of the most common, versatile and cost effective methods of marking in today’s manufacturing world. Highly effective on most Metal and Plastic components, Marksman’s Dot Peen Technology offers incredibly good cost of ownership over almost any other Marking Technology. The robust Tungsten Carbide Stylii that are available last and last without need for sharpening or replacement often times for many years. These systems will take computer keyboard entry or Barcode Scanner input and allow you to easily create layouts consisting of alfa-numeric text, graphics and 2D codes and permanently and professionally put them onto your parts at high speeds and with great repeatability and reliability.
Average marking depths on metal components is 0.004″ to 0.008″ but this can be controlled and varies from material to material. All of our systems are stand-alone meaning you do not require a PC on hand to operate, but they also come with a complimentary linking software that allows full control of the market through a PC if desired.

Additional features include:

  • Read/Write Removable SD Card
  • Serial Port for RS-232 Communication
  • USB Port for Flash Drive
  • 999 Layout internal memory
  • 2D Code Generator
  • Graphics Generation Software
  • Ethernet Port Communication

CUSTOM PART MARKING SERVICES by Millennium Signatures Marking Systems Inc.

Custom Part Marking Services
Millennium Signatures provides great precision and a fast turn-around with their Custom Part Marking Service

WE CAN MARK YOUR PARTS FOR YOU!

Millennium Signatures Marking Systems Inc., with facilities in Buffalo, NY and Burlington, ON in Canada has over 55 Years of experience in the field of Part Marking (Part Identification and Traceability). In many cases our clients do not have the volume initially or the time to mark their products cost effectively in-house. Many of our clients elect to send batches of parts to our facilities and have us process their parts for them. In most cases we can turn batches of parts around over night and are well affiliated with various Marking Specifications associated with the various industries and can provide results tailored to whatever is requested. Variable Data Applications, Linear & 2D Barcoding requirements, Circumferential Marking…. NO PROBLEM!

In some cases it is only temporary until their volumes increase or they become completely comfortable with one of our many technologies we offer and then they purchase the equipment from us. There are many benefits to doing this, such as it allows experts to process your parts to the required specification. It allows you to get feedback and approval from within your industry before making an expensive purchase. It allows us to do prepare all the artwork, programming layout files, fixturing and such to provide perfect marking every time and when you do make a purchase all of these items accompany your system so that you are instantly in production with perfect looking parts every time!

Visit our website at www.millenniumsignatures.com or contact our Technical Sales Team by phone at (905) 639-0909 or e-mail at info@millenniumsignatures.com

Have us mark some parts for you and buy with COMPLETE confidence!